On-surface synthesis of porous graphene nanoribbons containing nonplanar [14]annulene pores

The precise introduction of nonplanar pores in the backbone of graphene nanoribbon represents a great challenge. Here, we explore a synthetic strategy toward the preparation of nonplanar porous graphene nanoribbon from a predesigned dibromohexabenzotetracene monomer bearing four cove-edges. Successive thermal annealing steps of the monomers indicate that the dehalogenative aryl-aryl homocoupling yields a twisted polymer precursor on a gold surface and the subsequent cyclodehydrogenation leads to a defective porous graphene nanoribbon containing nonplanar [14]annulene pores and five-membered rings as characterized by scanning tunneling microscopy and noncontact atomic force microscopy. Although the C–C bonds producing [14]annulene pores are not achieved with high yield, our results provide new synthetic perspectives for the on-surface growth of nonplanar porous graphene nanoribbons.     

基于异构三联苯-2，2″，4，4″-四羧酸构筑的单水桥钴(Ⅱ)、镍(Ⅱ)配位聚合物的合成、结构及磁性质

使用异构三联苯-2,2″,4,4″-四羧酸配体(m-H₄tpta和p-H₄tpta),通过水热法合成了2例新的单水桥Co (Ⅱ)/Ni (Ⅱ)金属链状配位聚合物[Co (m-H₂tpta)(H₂O)₃]_n(1)和{[Ni₂(p-tpta)(H₂O)₆]·2H₂O}_n(2)。其结构通过FT-IR、元素分析、X射线单晶及粉末衍射进行了表征。在结构上,金属离子呈现出轻微扭曲的八面体几何构型,通过单水分子桥连接形成了一维金属链,异构H₄tpta配体分别采用μ₁-η¹∶η⁰∶η¹∶η⁰和μ₄-η¹∶η¹∶η¹∶η¹配位模式与金属离子连接,形成一维链和三维网状结构,配合物2表现出(4,4)-连接的NbO型的三维拓扑网络结构。磁性方面,配合物1的Co(Ⅱ)离子间通过μ₂-H₂O桥传递表现出反铁磁相互作用。配合物2也展现出Ni(Ⅱ)离子间的反铁磁耦合作用,与磁耦合Ni—Ow—Ni角有关。     

Determination of 12 additives in beverages by evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets combined with liquid chromatographyEI北大核心CSCD

An analytical method for the simultaneous determination of 12 additives in beverages was developed using evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets EVA-DLLME-SFOcombined with high performance liquid chromatography HPLC. The samples were extracted twice with 70%V/Vmethanol aqueous solution and extracted by EVA-DLLME-SFO method after the combination of the extractsand finally determined by HPLC. Extraction parameterssuch as types and amounts of extractantevaporant and heating agentthe concentration of saltand the extraction time were optimized. Under the optimized conditionsthere were good relationships in the ange of 0.25-50 μµg/mL with the limits of detection of 1.5 to 13.6 mg/kg and limits of quantification of 5.2 to 45.3 mg/kg. The recoveries at three spiked levels1025 and 50 mg/kgwere 76.8% to 101.2% with the relative standard deviations of 0.11% to 4.7%. The method can be used for rapid detection of 12 additives in beverages. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Constructing low-valent Ni nanoparticles for highly selective CO2 reduction

The electroreduction of CO₂（CO₂RR） into value-added chemicals is a sustainable strategy for mitigating global warming and managing the global carbon balance. However, developing an efficient and selective catalyst is still the central challenge. Here, we developed a simple two-step pyrolysis method to confine low-valent Ni-based nanoparticles within nitrogen-doped carbon（Ni-NC）. As a result, such Ni-based nanoparticles can effectively reduce CO₂ to CO, with a max...     

Microwave-assisted hydrothermal synthesis of NiMoO4 nanorods for high-performance urea electrooxidation

A large surface area with high active site exposure is desired for the nano-scaled electrocatalysts fabrication.Herein,taking Ni Mo O₄nanorods for example,we demonstrated the advantages of the microwaveassisted hydrothermal synthesis method compared to the traditional hydrothermal approaches.Both monoclinic structured Ni Mo O₄in the nanorods morphology are found for these samples but it is more time-saving and efficient in the Ni-Mo synergism for the catalyst obtained by mi...     

Ni nanoparticles encapsulated within H-type ZSM-5 crystals for upgrading palmitic acid to diesel-like fuels

Meso-Ni@HZSM-5 bi-functional catalysts were successfully post-encapsulated with about 3–7 nm Ni nanoparticles within HZSM-5 crystals,which exhibited significantly efficient conversion activity (67.4g[palmitic acid]g[Ni]^-1h^-1) of palmitic acid and 100%selectivity of hydrocarbons with the outstanding stability during recycling application,compared to the impregnated Ni/HZSM-5 catalyst (14.0 g[palmitic acid]g[Ni]^-1h^-1).     

Mn-Ce-M复合改性无硅残渣炭催化剂的NH3选择性还原NO性能研究

生物质作为极具潜力的可再生能源,其热解制油技术备受关注,副产物残渣炭的高值化利用是当下重要的研究内容之一。脱硅处理不仅可实现硅的资源化利用,同时可以实现炭材料的结构改性。本文开展了残渣炭煮溶脱硅研究,并基于最佳脱硅方式,探究不同金属M（M：Ho、Sb、La、Nd）对无硅残渣炭（FRB）催化剂的脱硝性能的影响规律。结果表明：煅烧预处理结合煮溶脱硅可以脱除99%以上的SiO2,脱硅的同时理化性质显著改善,表现出较大的比表面积（1923 m2/g）、丰富的介/微孔结构以及表面含氧官能团,并促进了催化剂的SCR反应活性（250℃时NOx脱除率可达100%）。此外,Ho改性无硅残渣炭脱硝催化剂具有最好的低温脱硝活性,在200~300℃范围内保持80%以上的脱硝效率。表征结果显示,MnCeHo/FRB催化剂具有较强的表面酸性和氧化还原性,活性组分在载体上均匀分散,且表面化学吸附氧较为丰富。此外,In-situ DRIFTs实验表明MnCe/FRB催化剂表面同时存在E-R和L-H机理,但E-R机理占主要地位。     

基于极少量采样的彩绘文物颜料成分分析

随着文物保护理念的提升,越来越提倡文物样品的无损或微损分析;同时由于文物样品的复杂性,对分析技术提出了更加严苛的要求.彩绘类文物的颜料分析研究,对其文物信息的提取,以及古代人类历史、社会、文化的研究和阐述具有重要作用.结合本研究组前期的研究成果,本研究提出了一种在极少量采样的情况下,分析研究文物颜料的方法,并用于榆林卧...     

国内外近30年“电化学”主题概念测查研究进展*

梳理了国内外1990-2020年核心期刊文献中对学生电化学主题概念测评的实证研究,主要涵盖学生电化学概念理解水平以及影响因素等方面。据此探讨其对化学教师教学实施以及国内外化学教育实证研究的启示,以期为中学化学教学及后续研究提供有益参考。