利用非线性传输线产生高功率射频场

根据孤立子理论,分析了利用变容非线性传输线产生射频场的机理。利用电路仿真方法系统地研究了影响射频场产生的相关参数,发现电感和零压电容越小、输入电压越大,射频场的频率越高;电容的非线性率越大,射频场的峰值电压越高、高频成分越多。并在此基础上,仿真设计了能产生峰值功率为0.8 GW、主频为19.42 MHz射频场的非线性传输线。     

火花通道长度对激光触发开关特性的影响

利用超高速相机,在曝光时间100 ns时,对不同能量下激光在氮气气体开关中形成的火花通道进行拍照,得到了不同焦距下激光波长266 nm时激光火花通道长度与激光能量的关系。开展了激光触发气体火花开关的实验研究,激光触发开关延时、抖动随激光能量的增加而减小。将火花通道长度与激光触发开关的特性进行了分析,气体开关的抖动随着激光火花通道长度的增加而减小,当火花通道沿电极间轴向长度达到开关电极间距40%时,开关的抖动为亚ns量级。     

有机-ZnO纳米线混合光电二极管特性

采用水热法制备了1维ZnO纳米线,并通过改变ZnO纳米线的取向（横向和竖直）和不同的P型半导体材料,制备了不同的有机-ZnO纳米线混合光电二极管。通过改变光照与非光照的条件下并在光照条件下改变光电二极管与光源的距离,对所制备的光电二极管的相关特性进行研究。结果表明:采用水热技术能够制备高质量的ZnO纳米线;当光电二极管两端通正向电压时,光照时的电流大于非光照时的电流,当通反向电压时,结果则相反;同时,光电流还与光照强度有关,光照强度越大,光电流越大。     

2D parameter optimization of Ne-like Cr x-ray laser on slab

A method of studying a non-equilibrium x-ray laser plasma is developed by extending the existing one-dimensional similarity equations to the case of two-dimensional plasma study in the directions perpendicular to the slab and along a focal line. With this method the characteristics of pre-plasma are optimized for transient neon-like Cr x-ray laser. It is found that when the duration and the intensity of 1.053μm pre-pulse are 1.2ns and 6.5 TW/cm² respectively with a delay time of 1.5ns, the temperature and the temperature discrepancy each approach a proper state, which will provide a uniform distribution of properly ionized neon-like Cr ions before the arrival of pumping pulse.     

Fractional Fourier-domain random encoding and pixel scrambling technique for double image encryption

A double image encryption method is proposed using fractional Fourier-domain random encoding and pixel scrambling technique. One of the two original images is encoded into the phase function of a synthesized input signal after being scrambled, and the other original image encoded into its amplitude. The phase function serves as phase mask in the input domain, and the synthesized input signal is then encrypted into stationary white noise by utilizing random phase encoding in fractional Fourier domain. The two original images can be retrieved without cross-talk by using the correct keys with fractional orders, the random phase mask and the pixel scrambling operator. Numerical simulations and security analysis have been done to prove the validity and the security of the proposed encryption method.     

Fringe pattern analysis by S-transform

S-transform proposed in 1996 by Stockwell R.G is a simple and popular technique for the time–frequency analysis. It has been introduced in optical three-dimensional shape measurement, recently. In this paper, a study about applications of S-transform in the demodulation of deformed fringe patterns is performed. We focus on discussing not only the S-transform spectrum filtering technique, the S-transform ridge technique and the phase gradient calculation method based on S-transform used in fringe pattern demodulation, but also the phase unwrapping technique. In addition, a generalized S-transform was introduced to analyze fringe patterns, which is helpful to improve the measurement accuracy and flexibility of the method based on S-transform. The reconstruction results based on S-transform were compared with that on wavelet transform and windowed Fourier transform in fringe analysis.     

Ionic liquid-assisted hydrothermal synthesis of dendrite-like NaY(MoO4)2:Tb phosphor

Micro-sized NaY(MoO₄)₂:Tb³⁺ phosphors with dendritic morphology was synthesized by a ionic liquid-assisted hydrothermal process. X-ray diffraction (XRD) indicated that the as-prepared product is pure tetragonal phase of NaY(MoO₄)₂. Field emission scanning electron microscopy (FE-SEM) images showed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors have dendritic morphology. The photoluminescent (PL) spectra displayed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors show a stronger green emission with main emission wavelength 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺ ion, and the optimal Tb³⁺ doping concentration for obtaining maximum emission intensity was confirmed to be 10 mol%. Based on Van Uitert's and Dexter's models the electric dipole–dipole (D–D) interaction was confirmed to be responsible for the concentration quenching of ⁵D₄ fluorescence of Tb³⁺ in the NaY(MoO₄)₂:Tb³⁺ phosphors. The intrinsic radiative transition lifetime of ⁵D₄ level is found to be 0.703 ms.     

Quantum information splitting of an arbitrary three-qubit state via the cavity input–output process

We propose a realizable quantum information splitting (QIS) scheme for an arbitrary three-qubit state via the cavity input–output process. In our scheme, a four-qubit cluster state and a three-qubit Greenberger–Horne–Zeilinge (GHZ) state are used as quantum channel. The sender and controller only need to perform Bell-state measurements and a single-qubit measurement, respectively. The receiver can reconstruct the arbitrary three-qubit state by classical communication and local operations. Compared with the scheme in Nie et al. [Optics Communications 284 (2011) 1457], the quantum resources and classical information in our scheme are decreased by 5 qubits and 1 bit, respectively. Moreover, we replace the W-state category measurement in the former with Bell-state measurements and a single-qubit measurement, which is more simple and feasible in experiment.     

基于SOI的亚波长偏振分束器的研究

运用严格耦合波理论对亚波长光栅的模场分布进行讨论,通过位相匹配方程建立衍射级、光栅矢量和波导传输常数的关系,得到波导光栅实现偏振分束功能时对应的设计参数;针对布拉格反射层良好的反射特性,设计了一种亚波长偏振分束器。为了提高光栅的耦合效率,在基底增加Bragg反射层,将传统偏振分束器的透射光反射,与输入光相干叠加,满足相位匹配条件后耦合输出,使耦合效率大大增加。     

Enhanced slow light propagation in photonic crystal waveguides using angular properties of scatter elements

Applicability of the angular properties of scatter elements as a tool to achieve improved slow light performance with small group velocity dispersion and large bandwidth in photonic crystal waveguides is investigated. A polyatomic photonic crystal waveguide, including two scatter elements with different geometrical shapes in each primitive cell, is proposed to investigate the feasibility of our method. Numerical results show that a versatile control of the dispersion relation of slow light modes, with large normalized delay-bandwidth products ranging from 0.2085 to 0.3394, can be obtained using a unique geometrical parameter.