A Convenient Synthetic Method of Metal Dendritic Porphyrins

Metal porphyrins are natural antioxidant reagent1-3. However, due to the characteristics of structures, they are only soluble in inorganic acids and part of polar organic solvents. Thus, it is limited to be used as effective pharmaceutical preparations. T…     

AnUV-algorithm for semi-infinite multiobjective programming

In this paper, we give an application ofUV-decomposition method of convex programming to multiobjective programming, and offer a new algorithm for solving semi-infinite multiobjective programming. Finally, the superlinear convergence of the algorithm is proved.     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

书籍扫描图像畸变参数自动计算方法的研究

为实现书籍扫描图像的畸变自动校正,提出用多项式来描述各像素的理论灰度g(zi)与页面上对应点到扫描仪工作平面距离zi二者之间的关系。为确立该多项式,在畸变参数已知条件下扫描一幅图像,根据已知畸变参数求出zi,即可按最小二乘法原理由各像素灰度的实际值求出多项式的各个系数。实验证明,采用4阶多项式已能满足一般要求,并求出了各系数。对任意扫描图像,自动计算畸变参数的方法为:首先利用扫描图像上页边空白处各像素的灰度,对畸变参数进行估计,并求出zi的估计值;然后代入所确立的多项式,可求得g(zi);通过调整各畸变参数的估计值,直到g(zi)与gi最为接近,即得最佳畸变参数。用于图像校正实验,获得了较好的校正效果,最大误差由不校正时的41%下降到了6.9%。这使得无需用户测量并输入有关畸变参数即可进行自动校正。     

Ising自旋体系的非平衡动态相变

在平均场理论架构下, 以含时金兹堡-朗道和Glauber动力学这两类动态模型为基础，研究 了受外场和温度共同驱动的Ising自旋体系的非平衡动态相变.确定了界定动态无序(动态顺 磁相P)和动态有序(动态铁磁相F)转变的动态相界.并根据动态序参量Q和Binder参数U随系统 温度t(r₀)、驱动外场频率ω和振幅h₀的变化规律，就上述两类模 型的动态相界上是否存在区分连续动态转变和非连续动态转变的三临界点这一引发争议的问 题做出了进一步分析说明. 关键词： Ising自旋体系 非平衡动态相变 含时金兹堡-朗道模型 Glauber 动力学模型     

两种以Znq2为基体的新型电致发光材料的合成与性能

以8-羟基喹啉为配体的金属配合物是一种性能优良的有机电致发光材料,其中有关8-羟基喹啉铝(Alq₃)研究已有大量报道,8-羟基喹啉锌(Znq₂)研究还有待发展。介绍了两种以Znq₂为基体的新型有机电致发光材料Znq₂(H₂O)₂和(Znq₂)₄的合成方法。用IR、XRD、TG、DTA和荧光测试方法进行表征与分析表明:Znq₂(H₂O)₂和(Znq₂)₄的玻璃化温度(T_g)分别为104.2℃和204.9℃;在161℃下Znq₂(H₂O)₂脱去水分子成为Znq₂,在361℃高温下四聚体(Znq₂)₄裂解为单体Znq₂;Znq₂(H₂O)₂和(Znq₂)₄具有很好的发光性能,在光致发光谱中λ_max分别是505,550nm。     

橙皮素A的NMR研究

橙皮素A是从中药北沙参(Glehnia littoralis Fr. Schmidt ex Miquel)的正丁醇萃 取物中分离得到的一种8-O-4′-型异木脂素苷类化合物. 通过化学方法和波谱分析鉴 定了该 化合物的结构. 采用2D NMR技术对其NMR信号进行了全归属. DMSO-d₆代替CD₃OD作为溶剂，并利用重水交换，能准确读出偶合常数J_7,8值.      

Realization of Greenberg-Horne-Zeilinger （GHZ） and W Entangled States with Multiple Superconducting Quantum-Interference Device Qubits in Cavity QED

An alternative scheme is proposed for generating the Greenberg-Horne-Zeilinger （GHZ） and W types of the entangled states with multiple superconducting quantum-interference device （SQUID） qubits in a single-mode microwave cavity field. In this scheme, there is no transfer of quantum information between the SQUIDs and the cavity, the cavity is always in the vacuum and thus the requirement on the quality of cavity is greatly loosened. In addition, during the process of the generation of the W entangled state, the present method does not involve a real excitation of intermediate levels. Thus, decoherence due to energy relaxation of intermediate levels is minimized.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

Characteristics of soft magnetic composite material under rotating magnetic fluxes

This paper reports the measurement of magnetic properties of the soft magnetic composite material SOMALOY^TM 500 in a square sample under different patterns of flux density with 2D magnetic excitations. The test system, principle of measurement, magnetic power loss calculation, and methods of correction for misalignment of H surface sensing coils are presented. The experimental results show that although nominally isotropic, the SOMALOY^TM 500 sample exhibits some anisotropy. The results are useful in the design and performance analysis of rotating electrical machines.