Simultaneous two-way classical communication and measurement-device-independent quantum key distribution on oceanic quantum channels

Simultaneous two-way classical and quantum (STCQ) communication combines both continuous classical coherent optical communication and continuous-variable quantum key distribution (CV-QKD), which eliminates all detection-related imperfections by being measurement-device-independent (MDI). In this paper, we propose a protocol relying on STCQ communication on the oceanic quantum channel, in which the superposition-modulation-based coherent states depend on the information bits of both the secret key and the classical communication ciphertext. We analyse the encoding combination in classical communication and consider the probability distribution transmittance under seawater turbulence with various interference factors. Our numerical simulations of various practical scenarios demonstrate that the proposed protocol can simultaneously enable two-way classical communication and CV-MDI QKD with just a slight performance degradation transmission distance compared to the original CV-MDI QKD scheme. Moreover, the asymmetric situation outperforms the symmetric case in terms of transmission distance and optical modulation variance. We further take into consideration the impact of finite-size effects to illustrate the applicability of the proposed scheme in practical scenarios. The results show the feasibility of the underwater STCQ scheme, which contributes toward developing a global quantum communication network in free space.     

毫米波回旋速调管放大器的自洽非线性数值模拟

为了实现回旋速调管放大器的快速设计,基于经典的回旋管的稳态单模非线性理论方法,开展了回旋速调管放大器的束波作用效率的理论模拟研究。由于单模理论无法匹配回旋速调管放大器的输入腔、中间腔两端的突变边界条件,所以输入腔与中间腔都只能采用给定场法进行求解。回旋速调管的输出腔的功率输出端通常采用缓变结构,这种腔体可以采用单模自洽理论进行求解。对两腔毫米波回旋速调管放大器进行了理论模拟,并与商业粒子模拟软件的结果进行对比,验证了该数值理论模拟方法的有效性。     

纳秒脉冲放电紫外光纤阵列检测与定位方法

峰化电容作为电磁脉冲模拟器中用于陡化脉冲输出的关键部件,在实际工程应用中易发生沿面放电和击穿现象,采用光电检测系统可对绝缘沿面放电现象进行有效分析。针对峰化电容器沿面放电监测的技术难题,研制了一套绝缘沿面放电过程光电检测系统,对绝缘沿面放电现象进行光电检测。首先提出了绝缘介质沿面放电过程光电探测系统的设计方案;其次,对系统的时延性能进行了评价;最后,完成了绝缘介质沿面放电过程定位实验,验证了光电探测系统的可行性。实验表明,该系统能够实现对放电区域的有效定位。     

变形镜部分驱动器断电失效对校正性能的影响

变形镜在长期工作的过程中,压电陶瓷驱动器因累积疲劳效应会导致其失效,从而导致校正性能的降低.从变形镜的影响函数出发,将失效驱动器的电压置零,采用有限元方法建立变形镜疲劳失效模型,重点分析畸变波前的形态分布、入射光束的类型和驱动器的排布方式等对校正能力的影响.实验结果表明,在部分驱动器失效的情况下,变形镜应当根据高斯型随...     

稳恒磁场对Fe-Fe50 wt.%Si扩散偶中间相生长的影响

本文考察了Fe-Fe50 wt.%Si扩散偶在1200℃ 无磁场以及稳恒磁场下扩散层生长规律. 利用真空浇注强制冷却技术制备Fe-Fe50 wt.%Si扩散偶, 将制备的扩散偶进行1200℃不同磁感应强度下的热处理. 对获得热处理后试样进行SEM与EDS线扫描分析, 结果表明, 无论无磁场还是稳恒磁场下Fe-Fe50 wt.%Si扩散偶均生成两个扩散层, 即FeSi相层和Fe-Si固溶体层, 并且发现0.8 T下的两个扩散层宽度均小于0 T磁场下试样. 按照抛物线规律, 计算了扩散偶中间扩散层的互扩散系数, 发现0.8 T磁场下FeSi相层和Fe-Si固溶体层的互扩散系数较无磁场下 分别降低了26.7%与34.1%. 通过对磁吉布斯自由能的计算, 发现0.8 T磁场对扩散激活能Q的影响不足以影响扩散过程. 但扩散过程中原子振动频率ν会受到磁场的影响, 进而影响扩散常数D₀, 磁场对原子振动频率的影响可以用拉莫尔旋进理论进行解释. 关键词： Fe-Fe50wt.%Si扩散偶 稳恒磁场 FeSi相 Fe-Si固溶体     

Evolution of geometrical structures,stabilities and electronic properties of neutral and anionic Li n Cu λ (n = 1–9, λ = 0, −1) clusters: compare with pure lithium clusters

The structural evolution, stabilities, and electronic properties of copper-doped lithium Li _n Cu^λ (n?=?1–9, λ?=?0, ?1) clusters have been systematically investigated using a density functional method at PW91PW91 level. Extensive searches for ground-state structures were carried out, and the results showed the copper tends to occupy the most highly coordinated position and form the largest probable number of bonds with lithium atoms. By calculating the binding energies per atom, fragmentation energies and the HOMO-LOMO gaps, we found LiCu, Li₇Cu, LiCu^?, Li₂Cu^? and Li₈Cu^? clusters have the stronger relative stability and enhanced chemical stability. The content and pattern of frontier MOs for the most stable doped isomers were analysed to investigate the bond nature of interaction among Li and Cu atoms. The results show some σ-type and π-type bonds are formed among them, and with small admixture of the Cu d characters. To achieve a deep insight into the electron localization and reliable electronic structure information, the natural population analysis and electron localization function were performed and discussed.     

Magnetic resonance image reconstruction using trained geometric directions in 2D redundant wavelets domain and non-convex optimization

Reducing scanning time is significantly important for MRI. Compressed sensing has shown promising results by undersampling the k-space data to speed up imaging. Sparsity of an image plays an important role in compressed sensing MRI to reduce the image artifacts. Recently, the method of patch-based directional wavelets (PBDW) which trains geometric directions from undersampled data has been proposed. It has better performance in preserving image edges than conventional sparsifying transforms. However, obvious artifacts are presented in the smooth region when the data are highly undersampled. In addition, the original PBDW-based method does not hold obvious improvement for radial and fully 2D random sampling patterns. In this paper, the PBDW-based MRI reconstruction is improved from two aspects: 1) An efficient non-convex minimization algorithm is modified to enhance image quality; 2) PBDW are extended into shift-invariant discrete wavelet domain to enhance the ability of transform on sparsifying piecewise smooth image features. Numerical simulation results on vivo magnetic resonance images demonstrate that the proposed method outperforms the original PBDW in terms of removing artifacts and preserving edges.     

A Novel Pyrene Fluorescent Sensor Based on the π–π Interaction Between Pyrene and Graphene of Graphene–Cadmium Telluride Quantum Dot Nanocomposites

In this article, water-soluble graphene–cadmium telluride quantum dot nanocomposites were fabricated through the synthesis of cadmium telluride quantum dots in the presence of graphene aqueous dispersion. It was found that pyrene could remarkably quench fluorescence of graphene–cadmium telluride quantum dot nanocomposites. On this basis, a novel method for the determination of pyrene was developed. Factors affecting the pyrene detection were investigated, and the optimum conditions were determined. Under the optimum conditions, a linear relationship could be established between the quenching of fluorescence intensity of graphene–cadmium telluride quantum dot nanocomposites and the pyrene concentration in the range of 6.00 × 10^?8–2.00 × 10^?6 mol L^?1 with a correlation coefficient of 0.9959. The detection limit was 4.02 × 10^?8 mol L^?1. Furthermore, the nanocomposites were applied to practical determination of pyrene in different water samples with satisfactory results.     

Establishment of an integrated data fusion method between the colorimeter and near-infrared spectroscopy to discriminate the stir-baked Gardenia jasminoides Ellis

Stir-heating is a common method to process Gardenia jasminoides Ellis. The processing of the G. jasminoides Ellis which do not meet the regulated requirements can result in the unqualified products, finally decreasing the efficacy of the drug. To guarantee the quality of the stir-baked G. jasminoides Ellis, a rapid and efficient method to discriminate the qualified stir-baked G. jasminoides Ellis from the unqualified was developed based on the middle level data fusion. 61 batches of qualified and unqualified stir-baked G. jasminoides Ellis were collected and analyzed using colorimeter and near-infrared spectroscopy, separately. L*, A*, and B* were apparent features that quantitatively described the characteristics of samples. The latent variables of partial least squares discriminant analysis model were extracted as the features of near-infrared spectroscopy. The extracted features from colorimeter and near-infrared spectroscopy were fused and a discriminant model was built using partial least squares discriminant analysis method. Accuracy, sensitivity, and specificity were used to evaluate the ability of classification. As a result, the accuracy, sensitivity, and specificity of the optimal partial least squares discriminant analysis model based on fused data were all equal to 1. It demonstrated that the developed method can be capable of discriminating the qualified stir-baked G. jasminoides Ellis from the unqualified. Compared with classification model results using color parameters or near infrared data alone, this data fusion strategy greatly improved the accuracy of classification.     

3-D simulation of soot formation in a direct-injection diesel engine based on a comprehensive chemical mechanism and method of moments

Here, we propose both a comprehensive chemical mechanism and a reduced mechanism for a three-dimensional combustion simulation, describing the formation of polycyclic aromatic hydrocarbons (PAHs), in a direct-injection diesel engine. A soot model based on the reduced mechanism and a method of moments is also presented. The turbulent diffusion flame and PAH formation in the diesel engine were modelled using the reduced mechanism based on the detailed mechanism using a fixed wall temperature as a boundary condition. The spatial distribution of PAH concentrations and the characteristic parameters for soot formation in the engine cylinder were obtained by coupling a detailed chemical kinetic model with the three-dimensional computational fluid dynamic (CFD) model. Comparison of the simulated results with limited experimental data shows that the chemical mechanisms and soot model are realistic and correctly describe the basic physics of diesel combustion but require further development to improve their accuracy.