Efficient and stable single-dopant white OLEDs based on 9,10-bis (2-naphthyl) anthracene

Efficient white organic light-emitting diodes (WOLEDs) are fabricated with a thin layer of 9,10-bis (2-naphthyl) anthracene (ADN) doped with Rubrene as the source of white emission. A device with the structure of ITO/NPB (70 nm)/ADN: 0.5% Rubrene (30 nm)/Alq₃ (50 nm)/MgAg shows a maximum current efficiency of 3.7 cd/A, with the CIE coordinates of x=0.33, y=0.43. The EL spectrum of the devices and the CIE coordinates remains almost the same when the voltage is increased from 10 to 15 V and the current efficiency remains quite stable with the current density increased from 20 to 250 mA/cm².     

CoNiZ系列合金的结构和马氏体相变性质

利用X射线衍射研究了CoNiZ(Z=Si,Sb,Sn,Ga等)合金在不同热处理条件下的相组成.当Z元素为Sn,Sb时,材料是完全的B2结构;但Z为Si时,材料变成面心立方的γ相.形成B2还是γ相由电子浓度和原子尺寸效应两种因素共同决定.而CoNiGa的研究结果表明,在合金中除了形成B2结构的同时还容易形成γ相,常表现出两相共存的特性.对材料进行不同方式的热处理可以使合金中两相的含量有所消长,γ相含量的多少对CoNiGa合金的马氏体相变有很大的影响.分析指出,两相共存及其所带来的物性变化是CoNiGa铁磁性形状记忆合金非常有利用价值的物理性质.     

Dy3+/Tm3+共掺杂钒磷酸钇的共沉淀法合成及光谱性质

以Y2O3、Dy2O3、Tm2O3、V2O5、(NH4)2GPO4为原料,采用共沉淀化学法合成了体色纯白的Dy^3 、Tm^3 共掺杂YP1-xVxO4荧光粉。对合成荧光粉的V^5 ／p^5 、Dy^3 ／Tm^3 摩尔比等条件进行了研究。利用SEM、变温紫外激光激发下的发射光谱及紫外激发下的发射光谱,对所合成的粉体的表面形貌及发光性能进行了表征。YP1-xVxO4：Dy^3 ,Tm^3 荧光粉在325nm紫外激光激发下,低温时存在基质VO4^3-的蓝色宽带发射,随着温度升高,VO4^3 吸收的激发能量更有效地传递给Dy^3 、Tm^3 ,使其发光逐渐增强;在254nm的紫外光激发下,YP1-xVxO4：Dy^3 ,Tm^3 荧光粉发白光,是一种潜在的二基色高压汞灯用荧光粉。     

Beam bending through compound structure with two subwavelength metallic slits in each period

To provide a more practical, easy-to-implement method to achieve directional modulation with a plasmonic lens, beam manipulation method via compound metallic gratings with two subwavelength slits filled with different dielectrics inside each period is proposed and numerically investigated by finite-difference time-domain (FDTD) method. Compared with conventional metal-grating based structures, phase retardation is tuned by the Fabry-Pérot (FP) resonant condition and light bending is achieved by constructing a carefully designed, curved phase front for the plasmonic lenses. Our designs have advantages in ease of fabrication and capability to perform in the far field. With these advantages, the designs are expected to be valuable in applications such as plasmonic circuits and photonic communication.     

A novel hyperchaotic system and its circuit implementation

A four-dimensional hyperchaotic system with five parameters is proposed. Its dynamical properties such as dissipativity, equilibrium points, Lyapunov exponent, Lyapunov dimension, bifurcation diagrams and Poincare maps are analyzed theoretically and numerically. Theoretical analyses and simulation tests indicate that the new system's dynamics behavior can be periodic attractor, chaotic attractor and hyperchaotic attractor as the parameter varies. Finally, the circuit of this new hyperchaotic system is designed and realized by Multisim software. The simulation results confirm that the chaotic system is different from the existing chaotic systems and is a novel hyperchaotic system. The system is recommendable for many engineering applications such as information processing, cryptology, secure communications, etc.     

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators (DP-MZMs) is proposed. The proposed scheme is not sensitive to modulation index and relatively strong MMW signal with good radio frequency spurious suppression ratio (RFSSR) can be obtained without strict requirement on modulation index. Filterless feature makes the scheme quite suitable for wavelength division multiplexing (WDM) applications. For verification, a 60 GHz millimeter wave with 44 dB RFSSR is generated from a 7.5 GHz radio frequency wave by simulation. Performance of the proposed scheme has been characterized under different conditions including DC-bias drifts of MZMs, different amplitudes of RF inputs and different extinction ratios of MZMs.     

A new multichannel time reversal focusing method for circumferential Lamb waves and its applications for defect detection in thick-walled pipe with large-diameter

This paper proposes a new multichannel time reversal focusing (MTRF) method for circumferential Lamb waves which is based on modified time reversal algorithm and applies this method for detecting different kinds of defects in thick-walled pipe with large-diameter. The principle of time reversal of circumferential Lamb waves in pipe is presented along with the influence from multiple guided wave modes and propagation paths. Experimental study is carried out in a thick-walled and large-diameter pipe with three artificial defects, namely two axial notches on its inner and outer surface respectively, and a corrosion-like defect on its outer surface. By using the proposed MTRF method, the multichannel signals focus at the defects, leading to the amplitude improvement of the defect scattered signal. Besides, another energy focus arises in the direct signal due to the partial compensation of dispersion and multimode of circumferential Lamb waves, alongside the multichannel focusing, during MTRF process. By taking the direct focus as a time base, accurate defect localization is implemented. Secondly, a new phenomenon is exhibited in this paper that defect scattered wave packet appears just before the right boundary of truncation window after time reversal, and to which two feasible explanations are given. Moreover, this phenomenon can be used as the theoretical basis in the determination of defect scattered waves in time reversal response signal. At last, in order to detect defects without prior knowing their exact position, a large-range truncation window is used in the proposed method. As a result, the experimental operation of MTRF method is simplified and defect detection and localization are well accomplished.     

Non-Gaussian water diffusion kurtosis imaging of prostate cancer

Purpose

To evaluate the non-Gaussian water diffusion properties of prostate cancer (PCa) and determine the diagnostic performance of diffusion kurtosis (DK) imaging for distinguishing PCa from benign tissues within the peripheral zone (PZ), and assessing tumor lesions with different Gleason scores.

Materials and Methods

Nineteen patients who underwent diffusion weighted (DW) magnetic resonance imaging using multiple b-values and were pathologically confirmed with PCa were enrolled in this study. Apparent diffusion coefficient (ADC) was derived using a monoexponential model, while diffusion coefficient (D) and kurtosis (K) were determined using a DK model. Differences between the ADC, D and K values of benign PZ and PCa, as well as those of tumor lesions with Gleason scores of 6, 7 and ≥ 8 were assessed. Correlations between parameters D and K in PCa were analyzed using Pearson’s correlation coefficient. ADC, D and K values were correlated with Gleason scores of 6, 7 and ≥ 8, respectively.

Results

ADC and D values were significantly (p < 0.001) lower in PCa (0.79 ± 0.14 μm²/ms and 1.56 ± 0.23 μm²/ms, respectively) compared to benign PZ (1.23 ± 0.19 μm²/ms and 2.54 ± 0.24 μm²/ms, respectively). K values were significantly (p < 0.001) greater in PCa (0.96 ± 0.20) compared to benign PZ (0.59 ± 0.08). D and K showed fewer overlapping values between benign PZ and PCa compared to ADC. There was a strong negative correlation between D and K values in PCa (Pearson correlation coefficient r = − 0.729; p < 0.001). ADC and K values differed significantly in tumor lesions with Gleason scores of 6, 7 and ≥ 8 (p < 0.001 and p = 0.001, respectively), although no significant difference was detected for D values (p = 0.325). Significant correlations were found between the ADC value and Gleason score (r = − 0.828; p < 0.001), as well as the K value and Gleason score (r = 0.729; p < 0.001).

Conclusion

DK model may add value in PCa detection and diagnosis. K potentially offers a new metric for assessment of PCa.     

Potential of a piezoelectric energy harvester from sea waves

A sea wave energy harvester from the longitudinal wave motion of water particles is developed. The harvester consisting of a cantilever substrate attached by piezoelectric patches and a proof mass is used to collect electrical energy owing to the electromechanical coupling effect of the piezoelectric patches from the longitudinal wave motion. To describe the energy harvesting process, a mathematical model is developed to calculate the output charge and voltage from the piezoelectric patches according to the Airy linear wave theory and classical elastic beam model. Results show that the mean value of the generated power increases with the increase in the ratio of the width to the thickness of the cantilever, the wave height, the sea depth (which equals to the cantilever height in this study), the ratio of the proof mass to the cantilever mass, and the ratio of the sea depth to the wave length. A value of the power up to 55 W can be realized for a practical sea wave with the values of the sea depth, wave height and wave length to be 3 m, 2 m, and 15 m, respectively. The collected power harvesting with respect to different categories of the sea waves are provided. Our simulations also show the generated electric power can be further increased by an increase in dimensions of the harvester considering the scale effect. This research develops a new technique for energy harvesting from sea waves by piezoelectric energy harvesters.