Application of Rhamnolipids as Dispersing Agents for the Fabrication of Composite MnO2-Carbon Nanotube Electrodes for Supercapacitors

The high theoretical capacitance of MnO₂ renders it a promising material for the cathodes of asymmetric supercapacitors. The good dispersion of MnO₂ and conductive additives in a nanocomposite electrode is a key factor for efficient electrode performance. This article describes, for the first time, the application of rhamnolipids (RL) as efficient natural biosurfactants for the fabrication of nanocomposite MnO₂-carbon nanotube electrodes for supercapacitors. RL act as co-dispersants for MnO₂ and carbon nanotubes and facilitate their efficient mixing, which allows for advanced capacitive properties at an active mass of 40 mg cm⁻² in Na₂SO₄ electrolytes. The highest capacitance obtained from the cyclic voltammetry data at a scan rate of 2 mV s⁻¹ is 8.10 F cm⁻² (202.6 F g⁻¹). The highest capacitance obtained from the galvanostatic charge–discharge data at a current density of 3 mA cm⁻² is 8.65 F cm⁻² (216.16 F g⁻¹). The obtained capacitances are higher than the capacitances of MnO₂-based electrodes of the same active mass reported in the literature. The approach developed in this investigation is simple compared to other techniques used for the fabrication of electrodes with high active mass. It offers advantages of using a biocompatible RL biosurfactant.     

Magnon decay in noncollinear quantum antiferromagnets

Instability of the excitation spectrum of an ordered noncollinear Heisenberg antiferromagnet with respect to spontaneous two-magnon decays is investigated. We use a spin-1/2 antiferromagnet on a triangular lattice as an example and examine the characteristic long- and short-wavelength features of its zero-temperature spectrum within the 1/S approximation. The kinematic conditions are shown to be crucial for the existence of decays and for overall properties of the spectrum. The XXZ and the J-J generalizations of the model, as well as the role of higher-order corrections, are discussed.     

Electrophoretic deposition of chiral polymers and composites

Electrophoretic deposition (EPD) method has been developed for the deposition of thin films of chiral polymers. EPD of poly-L-lysine (PLL) and poly-L-ornithine (PLO) films was performed for the first time on conductive substrates from aqueous and ethanol-water solutions. The deposition yield was monitored using a quartz crystal microbalance. The results demonstrated that the deposition yield can be varied by variation of the deposition time, voltage and polymer concentration in the solutions. It was shown that PLL and PLO provided stabilization and charging of hydroxyapatite (HA) nanoparticles in suspensions. Composite PLL-HA and PLO-HA films of controlled thickness were prepared by EPD. Electron microscopy investigations showed that the thickness of the PLL, PLO and composite films was varied in the range of 0-3 μm. The polymer and composite films can be used for biomedical applications.     

在硅胶表面制备牛血红蛋白分子印迹聚合物

采用表面印迹法, 以乙烯基三甲氧基硅烷修饰的硅胶为载体, 丙烯酰胺为功能单体, N,N-亚甲基双丙烯酰胺为交联剂, 并将改性聚乙烯醇(PVA)作为辅助识别聚合物链(ARPCs)引入聚合体系中, 制备了牛血红蛋白分子印迹聚合物(MIP). 实验使用红外光谱分析了改性PVA的结构特征, 用扫描电镜(SEM)观察MIP的表面形貌, 考察了ARPCs的含量对MIP吸附性能的影响. 吸附动力学实验研究表明, 聚合体系中ARPCs的引入使MIP对模板牛血红蛋白(BHb)的吸附量明显提高|十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)结果显示, MIP对BHb的特异性吸附能力明显提高.     

Surface modifications of Nitinol for biomedical applications

Cathodic electrophoretic deposition (EPD) has been utilized for the fabrication of composite films for the surface modification of NiTi shape memory alloys (Nitinol). In the proposed method, chitosan (CH) was used as a matrix for the incorporation of other functional materials, such as heparin, hydroxyapatite and bioglass. Chitosan-heparin films were deposited from solutions of non-stoichiometric chitosan-heparin complexes. It was found that the addition of anionic heparin to the solutions of cationic chitosan resulted in a significant increase in the cathodic deposition rate. The thickness of the films prepared by this method varied in the range of 0.1-3 microm. The ability of the chitosan-heparin films to bind antithrombin, as measured by binding of (125)I-radiolabeled antithrombin, was much greater than that of pure chitosan films. Composite chitosan-hydroxyapatite films, with thickness of 1-30 microm, were obtained as monolayers or laminates, containing chitosan-hydroxyapatite layers, separated by layers of pure chitosan. The hydroxyapatite nanoparticles showed preferred orientation in the chitosan matrix with the c-axis parallel to the substrate surface. The films showed corrosion protection of the Nitinol substrates in Ringer's physiological solutions. The feasibility of the fabrication of composite films containing hydroxyapatite and bioglass in the chitosan matrix has been demonstrated. The method offers the advantages of room temperature processing. The deposition mechanisms and possible applications of the films are discussed.     

TRANSFER MECHANISM OF QUININE DRUG ACROSS THE OIL/WATER (O/W) INTERFACE

The transfer phenomena of quinine drug at the aqueous 1,2- dichloroethane (DCE)interface have been studied by the current- scanning polarography. The relationships be-tween the wave height and pH of aqueous phase, concentration of quinine as well as therate of water drop are discussed. The effect of supporting electrolyte, buffer solution andthe nature of organic solvent on the polarographic wave is studied. The transfer char-acteristics of quinine in aqueous phase and in organic phase are compared, The mono- pro-tonated and diprotonated quinines can both transfer at the interface so as to produce twopolarographic waves. The transfer process of quinine at the interface is simultaneouslycontrolled by diffusion and reestablishment of the disturbed protonated equilibrium ofquinine. A further investigation is made by chronopotentiometry. On the basis of thetheoretical analysis, the formulae of the limiting current are derived and discussed. Thetheoretical results are in agreement with the experimental ones.     

Gamma induced changes in Makrofol/CdSe nanocomposite films

We applied an ex-situ casting procedure to prepare a nanocomposite (NCP) from Makrofol polycarbonate (PC) and CdSe nanoparticles. The CdSe nanoparticles were prepared by a thermolysis procedure in the presence of N₂ gas flow. Rietveld refinement of x-ray data illustrated that the CdSe adopts a cubic zinc blend structure of 6.057 Å lattice parameter and 2 nm typical grain size. Samples from the prepared NCP were exposed to γ dosages (20 kGy-250 kGy). The modifications induced in the NCP films owing to γ dosages have been studied. The γ irradiation (50 kGy-250 kGy) causes crosslinks that reduce the optical bandgap from 4.15 eV to 3.81 eV, associated with an increase in dielectric parameters and refractive index. This is attributed to an increase in the mass fraction of the disordered regions as specified by x-ray diffraction. The PC-CdSe NCP was found to have a reaction to color modification which makes it suitable for saleable reproduction on a printing press.     

Interband proximity effect and nodes of superconducting gap in Sr2RuO4

The power-law temperature dependences of the specific heat, the nuclear relaxation rate, and the thermal conductivity suggest the presence of line nodes in the superconducting gap of Sr2RuO4. These recent experimental observations contradict the scenario of a nodeless (k(x)+ik(y))-type superconducting order parameter. We propose that interaction of superconducting order parameters on different sheets of the Fermi surface is a key to understanding the above discrepancy. A full gap exists in the active band, which drives the superconducting instability, while line nodes develop in passive bands by the interband proximity effect.