Induction of a High-Yield Lovastatin Mutant of Aspergillus terreus by 12C6+ Heavy-Ion Beam Irradiation and the Influence of Culture Conditions on Lovastatin Production Under Submerged Fermentation

Heavy-ion beams, possessing a wide mutation spectrum and increased mutation frequency, have been used effectively as a breeding method. In this study, the heavy-ion beams generated by the Heavy-Ion Research Facility in Lanzhou were used to mutagenize Aspergillus terreus CA99 for screening high-yield lovastatin strains. Furthermore, the main growth conditions as well as the influences of carbon and nitrogen sources on the growth and the lovastatin production of the mutant and the original strains were investigated comparatively. The spores of A. terreus CA99 were irradiated by 15, 20, 25, and 30 Gy of 80 MeV/u (12)C(6+) heavy-ion beams. Based on the lovastatin contents in the fermentation broth, a strain designated as A. terreus Z15-7 has been selected from the clone irradiated by the heavy-ion beam. When compared with the original strain, the content of lovastatin in the fermentation broth of A. terreus Z15-7 increased 4-fold. Moreover, A. terreus Z15-7 efficiently used the carbon and nitrogen sources for the growth and production of lovastatin when compared to the original strain. The maximum yield of lovastatin, 916.7 μg/ml, was obtained as A. terreus Z15-7 was submerged cultured in the chemically defined medium supplemented with 3% glycerol as a carbon source, 1% corn meal as an organic nitrogen source, and 0.2% sodium nitrate as an inorganic nitrogen source at 30 °C in the shake flask. The result shows that heavy-ion beam irradiation is an effective method for the mutation breeding of lovastatin production of A. terreus.     

Rapid simultaneous determination of isoflavones in Radix puerariae using high-performance liquid chromatography-triple quadrupole mass spectrometry with novel shell-type column

A high-performance liquid chromatography (HPLC) coupled with triple quadrupole mass spectrometry (MS/MS) method was developed for rapid determination of 13 isoflavones in Radix puerariae. A novel shell-type column, namely Kinetex core-shell C(18) column (50 mm×2.1 mm id, 2.6 μm), and gradient elution were used during the analysis. The chromatographic peaks of 13 investigated compounds were identified by comparing their retention time and MS data with the related reference compounds. Multiple-reaction monitoring (MRM) was employed for the quantitative analysis with negative ionization mode. All calibration curves showed good linearity (r(2)>0.9990) within test ranges. The LOD and LOQ were lower than 0.017 and 0.873 μg/mL on column, respectively. The intra- and inter-day precisions for 13 analytes were <1.17 and 2.17%, respectively, and the recoveries were 93.1-104.4%. The validated method was applied for quantitative analysis of 13 isoflavones in 7 species of Radix puerariae. The result demonstrated that HPLC-MS/MS system with Kinetex column could be a promising analytical tool for the determination of isoflavones in traditional Chinese medicines, which is helpful for comprehensive evaluation of quality of R. puerariae.     

Ultrasound-Assisted Dispersive Liquid�CLiquid Microextraction Combined with Low Solvent Consumption for Determination of Polycyclic Aromatic Hydrocarbons in Seawater by GC�CMS

Ultrasound-assisted dispersive liquid?Cliquid microextraction (USA-DLLME) with low solvent consumption was demonstrated for gas chromatography-mass spectrometry (GC?CMS) determination of 16 typical polycyclic aromatic hydrocarbons (PAHs) in seawater samples. Factors affecting the extraction process, such as extraction and dispersive solvent, phase ratio, temperature, extraction and centrifugation time, were investigated thoroughly and optimized. The linear range was 20?C2,000 ng L^?1 except for acenaphthylene (Acy) at 10?C2,000 ng L^?1 and phenanthrene (Phe), fluoranthene (Flu) and pyrene (Py) all at 5?C2,000 ng L^?1. Enrichment factors (EFs) ranging from 722 to 8,133 were obtained, achieving limits of detection at 1.0?C10.0 ng L^?1. The method attained good precision (relative standard deviation, RSD) from 3.4 to 14.2% for spiked 50 ng L^?1 individual PAHs standards. Method recoveries were in the range 87?C124% and 70?C127% for spiked samples from simulated seawater and beach seawater, respectively. The proposed USA-DLLME helped to obtain about 1.1?C10 times higher EFs in a minimum amount of solvent and in less time than traditional DLLME.     

Catalytic conversion of lactic acid into propylene glycol over various metals supported on silica

Catalytic hydrogenation of lactic acid to propylene glycol was performed over various metals (Ag, Co, Cu, Ni, Pt, and Ru) supported on silica prepared by an incipient wetness impregnation method. The loading amount of each metal was 5 wt%. Crystallinity of the synthesized catalysts was investigated by X-ray diffraction (XRD), and the BET method was utilized to examine the surface area. Pore volume and pore size of catalysts were determined using BJH analysis of the N₂ adsorption isotherm. Particle sizes of various metals were determined from transmission electron microscopy (TEM) images. The catalytic activity was found to be strongly dependent on the supported metal. Among catalysts tested, Ru/SiO₂ showed the highest propylene glycol yield. The yield of propylene glycol increased with pressure, and the highest yield was achieved at 130 °C.     

Two octacyanometallate-based Ni(II)W(V) bimetallic assemblies with metamagnetism

Reactions of the precursors [Ni(macrocyclic ligand)](2+) with [W(CN)(8)](3-) afford two octacyanotungstate-based assemblies, (H(2)L(1))(0.5)[Ni(L(1))][W(CN)(8)]·2DMF·H(2)O (L(1) = 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane) (1) and [Ni(L(2))](3)[W(CN)(8)](2)·4H(2)O (L(2) = 3,10-dipropyl-1,3,5,8,10,12-hexaazacyclotetradecane) (2). Single crystal X-ray diffraction shows that 1 consists of anionic one-dimensional (1D) linear chains, while 2 is built of 2D graphite-like layers with (6, 3) topology. Magnetic studies reveal that both complexes exhibit metamagnetic behavior from the spin-canted antiferromagnet to the ferromagnet induced by field.     

New diorganotin(IV) derivatives of dipeptides: synthesis and characteristic spectral studies

Some new diorganotin(IV) derivatives of the formulae, R2SnL, where R=Me, n-Bu, Ph, and n-Oct, and L is the dianion of histidinylalanine (H2L-1) and histidinylleucine (H2L-2) have been synthesized by the reaction of R2SnCl2 and the preformed sodium salt of the respective dipeptides. The bonding and coordination behaviour in these derivatives are discussed on the basis of FT-IR, multinuclear 1H, 13C and 119Sn NMR and 119Sn M?ssbauer spectroscopic studies. These investigations suggest that dipeptides in R2SnL act as dianionic tridentate coordinating through the COO(-), NH2 and N(-)peptide groups. The 119Sn M?ssbauer studies, together with the NMR data, suggest a trigonal bipyramidal geometry around tin in R2SnL with the alkyl/aryl groups and Npeptide in the equatorial positions, while a carboxylic oxygen and the amino nitrogen atom occupy the axial positions.     

氮杂冠醚研究——Ⅲ.N-取代苯并氮杂冠醚的质谱研究

本文报道两种单取代苯并氮杂冠醚(1)和四种双取代苯并氮杂冠醚(2)的电子轰击(EI)质谱及其分子离子峰。化合物(1)的特征峰,m/z 372,342,236,192,136,121,109,56;化合物(2)的特征峰:m/z[M-109]~ ,[M/2]~ ,[M/2±13]~ 等。据此提出了单取代和双取代苯并氮杂冠醚经电子轰击断裂的可能途径。     

Selective Determination of Dopamine in the Presence of Ascorbic Acid at Porous‐Carbon‐Modified Glassy Carbon Electrodes

Selective dopamine (DA) determinations using porous‐carbon‐modified glassy carbon electrodes (GCE) in the presence of ascorbic acid (AA) were studied. The effects of structure textures and surface functional groups of the porous carbons on the electrochemical behavior of DA was analyzed based on both cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. The differential pulse voltammetry of DA on the modified GCE was determined in the presence of 400‐fold excess of AA, and the linear determination ranges of 0.05–0.99, 0.20–1.96, and 0.6–12.60 μM with the lowest detected concentrations of 4.5×10^?3, 4.4×10^?2, and 0.33 μM were obtained on the mesoporous carbon, mesoporous carbon with carboxylic and amino groups modified electrodes, respectively.     

Two- and three-dimensional lanthanide complexes: synthesis, crystal structures, and properties

3,5-pyrazoledicarboxylic acid (H3L) reacts with nitrate salts of lanthanide(III) (Ln=Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, and Er) under hydrothermal conditions to form a series of lanthanide polymers 1-9. These nine polymers have the same crystal system of monoclinic, but they exhibit three different kinds of metal-organic framework structures. The complexes {[Ln2(HL)3(H2O)4].2H2O}n (Ln=Pr (1), Nd (2), and Sm (3)) were isostructural and exhibited porous 3D frameworks with a Cc space group. The complexes {[Ln2(HL)3(H2O)3].3H2O}n (Ln=Eu (4), Gd (5), and Tb (6)) were isostructural and built 2D double-decker (2DD) frameworks with a P21/c space group. The complexes {[Ln(HL)(H2L)(H2O)2]}n ((Ln=Dy (7), Ho (8), and Er (9)) were also isostructural and formed 2D monolayer (2DM) frameworks with a P21/n space group. The structure variation from the 3D porous framework to the 2D double-decker to the 2D monolayer is attributed to the lanthanide contraction effect. Notably, six new coordination modes of 3,5-pyrazoledicarboxylic acid were observed, which proved that 3,5-pyrazoledicarboxylic acid may be used as an effective bridging ligand to assemble lanthanide-based coordination polymers. The photophysical and magnetic properties have also been investigated.