Electro-hydrodynamic fabrication of ZnO-based dye sensitized solar cells

The electro-hydrodynamic (EHD) technique has been successfully applied for manufacturing ZnO photoanode in dye sensitized solar cells (DSSCs). Porous structure of ZnO film after calcinations was beneficial to the absorption of dye and infiltration of electrolyte. By using ionic liquid as an electrolyte, a high short-circuit photocurrent density of 12.1 mA/cm² was attained and the overall photo-to-electric energy conversion efficiency (η) was 3.4% under an AM-1.5 illumination at 100 mW/cm². At the same time, the influence factors on the solar cell performance, such as the concentrations of polyvinyl alcohol (PVA) during EHD process and light intensity were discussed. PACS 81.07.Bc; 84.60.Jt; 81.15.Rs     

Design and Synthesis of a Ruthenium(II) Complex-Based Luminescent Probe for Highly Selective and Sensitive Luminescence Detection of Nitric Oxide

Nitric oxide (NO) is one of the most important intercellular signaling molecules, and plays important roles in various biological systems. In this work, a unique Ru^II complex, tris[(5-(4-methylamino-3-aminobenzylamino)-1,10-phenanthroline)] ruthenium(II) hexafluorophosphate [Ru(MAA-phen)₃][PF₆]₂, has been designed and synthesized as a luminescent probe for the detection of NO in aqueous media. The complex itself is almost non-luminescent, but can specifically react with NO under the aerobic conditions to afford its highly luminescent triazole derivative in aqueous media, [Ru(MTA-phen)₃]²⁺ (MTA-phen: methyl-trazolebenzylamino-1,10-phenanthroline), accompanied by a 302-fold increase in luminescence intensity at 598 nm with a 130 nm Stokes shift. The luminescence response of [Ru(MAA-phen)₃]²⁺ to NO is rapid, highly specific without interferences of other reactive oxygen/nitrogen species, and highly stable against the pH changes in the range of pH 4.5–9.5. These features enable [Ru(MAA-phen)₃]²⁺ to be used as a probe for the highly selective and sensitive luminescence detection of NO in weakly acidic, neutral, and weakly basic media.     

基于SERS与PCA-SLR实现乙基对氧磷定量检测

利用表面增强拉曼光谱(SERS),结合主成分分析(PCA)与分段线性回归(SLR)算法实现乙基对氧磷的定量检测。首先采集820～1 630 cm-1乙基对氧磷溶液SERS,并对820～1 630 cm-1(全范围)与845～875 cm-1(特征范围)光谱分别进行标准正态变换(SNV)、多元散射校正(MSC)、一阶导数绝对值、二阶导数等预处理;然后经PCA降维后利用SLR建立乙基对氧磷溶液浓度预测模型。通过对比不同模型的预测准确度,发现特征范围光谱采用MSC预处理后所建立的模型为最优,总体预测均方误差值(RMSEP)为0.33,满足乙基对氧磷定量检测的需要。     

光学偏振玻璃的发展

光学偏振玻璃大约是 15年前研制和开发出来的 ,投入市场后 ,以其优异的性能在偏振片领域独占一方 ,尤其是在光纤传感器和高性能大屏幕液晶显示领域 ,光学偏振玻璃占据了主导产品的地位。详细综述了光学偏振玻璃的发展历史、基本原理和结构、生产工艺以及产品性能 ,并指出了存在的问题和发展方向     

非共轴激光雷达几何因子分析与测量

介绍了非共轴激光雷达几何因子的物理意义,分别通过理论分析和试验测量给出了求解几何因子的方法。结合自行研制的CSY-1便携式能见度激光雷达,将两种方法得到的几何因子进行对比,讨论了系统参数对几何因子的影响,从而实现了对激光雷达系统优化设计的可能性。     

新型电感储能脉冲功率驱动源

提出了将传统单个储能电感利用传输线分隔成两部分的新型电感储能脉冲功率驱动源技术方案。理论分析表明,利用传输线电容的耦合延时作用,可有效对调制器输出脉冲波形进行整形,并且可以进一步提高能量转换效率,从而克服传统电感储能脉冲功率源输出波形质量差(类三角波波形)的缺点。基于该思想开展了实验研究,获得了电压约300 kV,电流约20 kA的电子束,并成功驱动S波段磁绝缘线振荡器获得了百MW量级的微波输出。     

Optical switching based on the manipulation of microparticles in a colloidal liquid using strong scattering force

This paper demonstrates the realization of an optical switch by optically manipulating a large number of polystyrene spheres contained in a capillary.The strong scattering force exerted on polystyrene spheres with a large diameter of 4.3 μm is employed to realize the switching operation.A transparent window is opened for the signal light when the polystyrene spheres originally located at the beam centre are driven out of the beam region by the strong scattering force induced by the control light.The switching dynamics under different incident powers is investigated and compared with that observed in the optical switch based on the formation of optical matter.It is found that a large extinction ratio of ～ 30 dB and fast switching-on and switching-off times can be achieved in this type of switch.     

高精度半导体激光打标机F-θ镜头设计

为保证半导体激光打标机F-θ镜头的扫描质量,实现系统像高与扫描角的线性变化,需对F-θ镜头给予一定的畸变量,并使其满足等晕条件。分析F-θ镜头工作原理及像差要求,根据1 064 nm半导体激光打标机的光源成像要求选择合适的玻璃材料,合理分配每片透镜的光焦度,以保证等晕成像;根据F-θ镜头线性成像要求,计算系统总畸变量为1.6%,系统总畸变量为系统的实际桶形畸变与相对畸变量之和;在光学系统优化设计时,引入这两项优化参数,优化过程中观察系统成像变化情况。设计结果表明:系统MTF曲线接近衍射极限,F-θ镜头相对畸变小于0.36%,各视场均方根半径均小于艾里斑直径,并且整个系统70%的能量集中在直径为16 μm的圆内,系统总畸变量为1.58%,满足设计指标要求。