电子全息法三维物场逐层分析

本文叙述了一种三维物场的定量再现、分析方法,其中采用了电子全息法,它包括:1)三维物场全息图的数字记录,2)全息图面上复振幅分布的数字再现,3)三维物场的逐层再现。由此可以获得整个三维物场的信息,这一方法以CCD摄象机作为记录介质,然后把由CCD采集的数字全息图输入计算机,利用频谱滤波法经过傅里叶变换、频谱分离、反傅里叶变换再现出全息图面上的复振幅。在此基础上借助频域衍射公式可再现出任何一层(平行于全息图面)上的图象。这样,我们用这一数字再现和逐层分析的方法便可研究三维物场的一些特性,如物体在其中的位置等。整个再现过程是由计算机软件实现,其中采用了二维快速傅里叶变换算法,再现过程可在几分钟内完成。本文同时还给出了这一数字再现方法的空间分辨率,并且通过计算机模拟展示了一个理想三维物场的再现过程及再现结果。最后指出了这一方法存在的问题及未来的应用前景。     

一次教学实验仪器更新的尝试

探讨了教学实验仪器所面临的更新换代的新形势，结合视频光学投影比工主的研制论述更新的原则和方法。     

Micro-vibrating spatial filters-induced beam positioning stability in large laser system

A dynamic beam propagation model of micro-vibrating spatial filters in inertial confinement fusion(ICF) facilities is built based on the additional beam in SG-II facility.The transfer matrix is then deduced,and the sensitivities of the beam positioning to the pellet in the target area to the vibrations of every spatial filter are analyzed,which indicates that the vibrations of spatial filters in the pre-amplify zone has less effects on beam positioning stability at the target.In addition,the vibrations of spatial filters in the main amplify zone dominates the beam positioning stability of the target,especially the vibration of the spatial filter SF7.     

High power single-sided Bragg reflection waveguide lasers with dual-lobed far field

We report on 980-nm InGaAs/GaAs lasers with dual-lobed far field based on a single-sided Bragg reflection waveguide (BRW). The high slope efficiency ～0.92 W/A and a continuous wave (CW) output power >1.5 W (3.2 W pulsed) have been obtained. The threshold current density is as low as 253 A/cm² for a 1.5-mm-long device and the transparency current density is only 140 A/cm². The further analysis shows the intrinsic reason for the single-lobed or the dual-lobed far-field distribution is determined by the mode shape in the cavity, not the single-sided or dual-sided BRW structure. The condition to achieve a narrow single-lobed far-field distribution is discussed.     

Characterization of relativistic electrons generated by a cone guiding laser pulse

We demonstrated the interaction of a gold cone target with a femto second(fs) laser pulse above the relativistic intensity of 1.37×10 18 μm 2 W/cm 2.Relativistic electrons with energy above 2 MeV were observed.A 25%-40% increase of the electron temperature is achieved compared to the case when a plane gold target is used.The electron temperature increase results from the guiding of the laser beam at the tip and the intense quasistatic magnetic field in the cone geometry.The behavior of the relativistic electrons is verified in our 2D-PIC simulations.     

C波段加速器初步热测实验

为了开展加速器小型化技术研究,进行了C波段2 MeV驻波加速器研制工作。目前,该加速器研制取得了显著进展,完成了全密封加速管的焊接,建立了加速器热测实验平台。在重复频率50 Hz情况下,进行了初步热测出束实验,利用电离室剂量仪测试了加速器靶前1 m处的X射线剂量率,并利用钢吸收法测试了电子束的能量。初步实验结果表明:电子束能量约2.5 MeV,剂量率超过330 mGy/(minm)。     

钙钛矿CaTiO3的超高压结构研究

利用同步辐射x射线衍射和 DAC 高压技术在室温下测量了钙钛矿CaTiO₃在压力0—44.53 GPa下的结构变化.结果表明，随着压力的增加CaTiO₃的三个晶轴都受到不同程度的压缩，a,b的压缩率相近且相对比较大，c的压缩率最小，但没有证据表明有相变的发生.在压力范围内CaTiO₃的P-V关系用Murnaghan状态方程表示，设定K′0=4，得到V0=0.2245(6)nm3和K0=222(9) GPa.应用赝立方角γpc与压力的关系，初 关键词： 3')" href="#">CaTiO₃ 结构 超高压 状态方程     

粒子鉴别中dE/dx和TOF的权重

在北京谱仪数据分析中,粒子鉴别使用了dE/dx和TOF的信息.在利用dE/dx和TOF联合鉴别粒子时,通常的做法是把两者的χ²值等权重相加(χ²方法).在不同的动量区间,dE/dx和TOF对粒子的鉴别能力不同.本文给出两者联合鉴别时不同动量区间的权重,并构造一个新的线性变量来进行粒子鉴别