A facial approach to fabricate superhydrophobic aluminum surface

A facial chemical etching method was developed for fabricating superhydrophobic aluminum surfaces. The resultant surfaces were characterized by scanning electron microscopy, water contact angle (WCA) measurement, and optical methods. The surfaces of the modified aluminum substrates exhibit superhydrophobicity, with a WCA of 154.8° ± 1.6° and a water sliding angle of about 5°. The etched surfaces have binary structure consisting of the irregular microscale plateaus and caves in which there are the nanoscale block‐like convexes and hollows. The superhydrophobicity of aluminum substrates occurs only in some structures in which the plateaus and caves are appropriately ordered. The resulted surfaces have good self‐cleaning properties. The results demonstrate that it is possible to construct superhydrophobic surface on hydrophilic substrates by tailoring the surface structure to providing more spaces to trap air. Copyright © 2009 John Wiley & Sons, Ltd.     

Fabrication and Tribological Properties of Pb Nanoparticles

In this paper, we describe a surfactant-assisted solution dispersion method to obtain metal nanoparticles, which involves dispersing and stabilizing metal droplets in an appropriate solvent. This method has been successfully used to prepare Pb nanoparticles from bulk Pb. The X-ray powder diffraction and transmission electron microscopy investigations show the formation of Pb nanoparticles possessing the same crystal structure as bulk metal and an average particle diameter of 40 nm. Thermal analysis indicates that Pb nanoparticles have organic shell, which is in agreement with the excellent oil-solubility. In addition, the tribological properties of Pb nanoparticles as additive in oil are discussed.     

具奇异边界条件的一类拟线性椭圆型方程

得到了一类拟线性椭圆型方程爆破解的存在性。     

End‐grafting copolymers of styrene and 4‐vinylpyridine on an interacting solid surface

Copolymers of styrene and 4‐vinylpyridine with a styrene fraction f varying from 1 to 0 were grafted onto a silicon substrate in the melt. The grafting reaction and the stability of the grafted chains were investigated by Fourier transform infrared and X‐ray photoelectron spectroscopy. The thickness and surface morphology of the grafted copolymer layers were characterized with ellipsometry and atomic force microscopy (AFM). The copolymer chains were successfully grafted to the surface of the silicon substrate by a reaction between the hydroxyl groups of the nitroxide moiety at the end of the copolymers and the silanol groups on the surface of the silicon wafer. A measurement of the thickness of the grafted copolymer layers showed that the ratio of grafted‐layer thickness to the unperturbed chain radius of gyration decreased with the increasing fraction of 4‐vinylpyridine in the copolymer; this indicated that the grafted layer was strongly attracted to the substrate. In addition, an accelerated grafting process was observed at grafting times ranging from 48 to 72 h for pure poly(4‐vinylpyridine) and copolymers with f values of 0.3 and 0.5. AFM observation revealed that the grafted layers densely and homogeneously covered the silicon substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1332‐1343, 2005     

A facile way for preparing tin nanoparticles from bulk tin via ultrasound dispersion

In this paper, we reported a facile and rapid process to prepare tin nanoparticles from bulk tin via ultrasound dispersion. The morphology and structure of synthesized tin nanoparticles were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectrum (XPS) and thermogravimetric analysis (TGA). The results show that the morphology of tin nanoparticles is spherical and the structure of tin nanoparticles has the same crystal structure as the bulk tin. In addition, the tribological property of tin nanoparticles as additives in oil is evaluated on a four-ball tester and the results show that tin nanoparticles exhibit good performance in wear.     

Highly stable and reusable imprinted artificial antibody used for in situ detection and disinfection of pathogens

Sandwich ELISA methods have been widely used for biomarker and pathogen detection because of their high specificity and sensitivity. However, the main drawbacks of this assay are the cost, the time-consuming procedure for the isolation of antibodies and their poor stability. To overcome these restrictions, we herein fabricated artificial antibodies based on imprinting technology and developed a sandwich ELISA for pathogen detection. Both the capture and detection antibodies were obtained via an in situ method, with simplicity, rapidity and low cost. The peroxidase mimics, the CeO₂ nanoparticles, as signal generators were integrated with the detection antibody. The fabricated artificial antibodies exhibited not only natural antibody-like binding affinities and selectivities, but also superior stability and reusability. The detection limit was about 500 CFU mL^–1, which is much lower than that of traditional ELISA methods (10⁴ to 10⁵ CFU mL^–1). Furthermore, the capture antibody can disinfect pathogens in situ.     

A DFT study of DMC formation on Rh‐doped Cu/AC surfaces

The activity and selectivity of heterogeneous catalysts can be significantly improved by dispersion of another active component in the metal substrate. The impact of Rh promoter on the formation of dimethyl carbonate (DMC) via oxidative carbonylation of methanol on Cu–Rh/AC (activated carbon) catalyst was investigated by density functional theory calculations. The most stable configurations of reacting species (CO, OH, CH₃O, monomethyl carbonate, and DMC) adsorbed on the Cu⁰(zero‐valent copper)/AC and Cu–Rh/AC surfaces were determined on the basis of the calculated results. The reaction energy and activation energy of the rate‐limiting steps on the Cu–Rh/AC and Cu⁰/AC surfaces were compared. The activation energies of the rate‐limiting step of CO insertion into dimethoxide are 206.3 and 304.8 kJ mol^?1 on the Cu–Rh/AC and Cu⁰/AC surfaces, respectively. The activation energies of the rate‐limiting step of CO insertion into methoxide are 78.5 and 92.7 kJ/mol on the Cu–Rh/AC and Cu⁰/AC surfaces, respectively. The calculated results indicate that the addition of Rh atom has a significant effect on decreasing the active energy the main pathway for DMC formation. © 2015 Wiley Periodicals, Inc.     

磺酰脲类除草剂分子印迹聚合物制备及应用研究进展

磺酰脲类除草剂本身易降解,在环境和生物样品中痕量存在,其残留分析工作颇具挑战。分子印迹聚合物因其良好的选择性和稳定性已被广泛应用于农药残留分析的分离与富集前处理过程,提高了检测的准确度和精密度。本文从单体、溶剂与致孔剂、聚合方法三个方面概述了近15年来磺酰脲类分子印迹聚合物的制备,并对其在残留检测中的应用方式进行了综述,为磺酰脲类除草剂残留检测技术的进一步开发提供了参考。