全光纤光子集成器件及系统

本对全光纤光子集成器件与系统进行了较为全面地综述,结合我们的工作,对目前的研究热点：光纤光栅,光纤激光器,光纤放大器,光纤光栅分插器与传感器等诸多光子器件以及由这些器件组成的波分复用通信系统进行了介绍和评述,一些新成果和新进展表明,这些光子器件与系统在当今和未来的光通信中将发挥重要作用。     

一种改进的夜间数字能见度测量方法

为降低背景光噪声对数字摄像法夜间能见度测量的不确定性影响,对双光源法能见度测量系统进行改进。该系统利用避光筒限制CCD相机视场角,拍摄2个位于不同距离的LED背光源,然后对摄取到的图像进行处理得到光源图像的灰度值,再根据阿拉德定律求得大气消光系数,计算出大气能见度值。通过在无背景光、有背景光未加避光筒和加避光筒3种条件下的比对实验,分析光源图像的灰度信息,并将实验结果进行处理,得出有避光筒和无避光筒时测得的能见度值与无背景光下测量结果的相关系数分别是0.911 3和0.322 7,均方根相对偏差分别是6.87% 和23.38%。结果表明:系统抑制背景光噪声的能力明显增强,能较准确地测量夜间能见度。     

基于吸聚一体的低散射传输型透镜设计

通过传输型超表面透镜与电路模拟雷达波吸收器的集成设计,提出了一种兼具透射波前变换与带外雷达散射截面减缩特性的微波复合材料设计方法。透镜采用亚波长分布的周期性单元,由梯度相位补偿对透射波进行调节,进而获得平面波前与球面波前之间的互易变换。并且,使用透镜在波前变换频带以外低频端的反射特征,结合单个有耗层设计,构造了电路模拟吸波器。选用一副缝隙耦合馈电的微带贴片天线单元作为初级馈源天线,观察到复合材料的波前变换特性可在宽频带范围内产生主瓣增益增强效果。与透镜相比,电路模拟吸波器的引入使得复合材料针对TE与TM极化分别可在130.68%与155.11%的频率范围内获得雷达散射截面减缩效果。通过全波模拟和实验测量,验证了辐射增益增强与雷达散射截面减缩效果,表明了复合材料吸聚一体设计的有效性。     

中国散裂中子源准直控制网数据处理方法

以中国散裂中子源CSNS的直线加速器控制网为例,对其数据处理方法进行研究,采用平面与高程二维平差以及三维定向平差两种方式对准直控制网进行处理分析。同时,为了使准直数据处理更加简易便利,提出利用激光跟踪仪的测量软件SA实现三维定向平差的方法。通过不同软件及不同数据处理方法的对比,验证准直控制网数据处理的正确性,最终200 m长直线控制网点位精度优于0.2 mm,这为准直控制网的数据处理提供了指导。     

荧光光度法测定水体中痕量邻苯二酚

在pH 3.2的酸性介质中,邻苯二酚与染料天青Ⅰ相互作用导致荧光强度明显增强,以发射波长343.0nm测定时,邻苯二酚的浓度在0.075～30μmol.L-1范围内与其荧光的增强程度呈线性关系,方法的检出限(3s/k)为7.51nmol.L-1。方法用于实际水样分析,加标回收率在97.0%～104%之间,测定值的相对标准偏差(n=5)在2.8%～3.9%之间。     

Effective optical path length investigation for cubic diffuse cavity as gas absorption cell

A simple cubic-shaped cavity with a high-diffuse-reflectivity inner coating as a novel gas detection cell was developed. The effective optical path length (EOPL) was evaluated by comparing the oxygen absorption signal in the cavity and in air based on tunable diode laser absorption spectroscopy. The law for a spherical cavity was applied and modified to a cubic cavity as a function of reflectivity ρ, port fraction f, and the side length. Single-pass average path length of the cubic cavity was 0.723(7) times the side length. EOPL can be modified conveniently by adjusting the parameters of the cavity.     

Adsorptive removal of nitrogen-containing compounds from fuel by metal-organic frameworks

The adsorptive denitrogenation from fuels over three metal-organic frameworks(MIL-96(Al),MIL-53(Al)and MIL-101(Cr))was studied by batch adsorption experiments.Four nitrogen-containing compounds(NCCs)pyridine,pyrrole,quinoline and indole were used as model NCCs in fuels to study the adsorption mechanism.The physicochemical properties of the adsorbents were characterized by XRD,N2physical adsorption,FT-IR spectrum and Hammett indicator method.The metal-organic frameworks(MOFs),especially the MIL-101(Cr)containing Lewis acid sites as well as high specific surface area,can adsorb large quantities of NCCs from fuels.In addition,the adsorptive capacity over MIL-101(Cr)will be different for NCCs with different basicity.The stronger basicity of the NCC is,the more it can be absorbed over MIL-101(Cr).Furthermore,pore size and shape also affect the adsorption capacity for a given adsorbate,which can be proved by the adsorption over MIL-53(Al)and MIL-96(Al).The pseudo-second-order kinetic model and Langmuir equation can be used to describe kinetics and thermodynamics of the adsorption process,respectively.Finally,the regeneration of the used adsorbent has been conducted successfully by just washing it with ethanol.     

Analysis of financial stock markets through multidimensional scaling based on information measures

In this paper, a novel multidimensional scaling (MDS) based on information measures method is proposed to analyze financial stock markets. In order to examine the effectiveness of this method, we applied it to the classification of two types of artificial series, the logistic map model and the cubic map model, as well as stock time series. Moreover, the traditional MDS using Euclidean dissimilarity is also provided as a reference for comparisons. The results show that the MDS based on information measures can give us more detailed, exact and clearer information on the classification of simulation series and stock time series than the MDS using Euclidean dissimilarity. In addition, the proposed graphical method may also assist in the construction of multivariate econometric models.     

The influences of amplified spontaneous emission,crystal temperature and round-trip loss on scaling of CW thin-disk laser

In this paper, a model is built to explore how the parameters (amplified spontaneous emission (ASE), temperature and round-trip loss) influence the output power in a thin-disk laser. It is found that optical efficiency of the disk laser is reduced with the increase of ASE, temperature or round-trip loss. The parameters are optimized to maximize the output power based on our model. We find that it is necessary to balance the need to lower the temperature with the need to control ASE during the optimization process. But the balance becomes more difficult to achieve with the increase of round-trip loss. We conclude that output power of more than 2.6 MW with a single disk can be achieved, but the necessary disk size (more than 0.5 m) is far beyond the actual technical limits. But it is possible to achieve output power of over a hundred kilowatts using a 10 cm disk in the near future.