Cascading failure in Watts-Strogatz small-world networks

In this paper, we study the cascading failure in Watts-Strogatz small-world networks. We find that this network model has a heterogeneous betweenness distribution, although its degree distribution is homogeneous. Further study shows that this small-world network is robust to random attack but fragile to intentional attack, in the cascading failure scenario. With comparison to standard random graph and scale-free networks, our result indicates that the robust yet fragile property in the cascading failure scenario is mainly related to heterogeneous betweenness, rather than the network degree distribution. Thus, it suggests that we have to be very careful when we use terms such as homogeneous network and heterogeneous network, unless the distribution we refer to is specified.     

Xe-Kr laser induced collisional ionization system and experimental preparation of its initial state: Four-photon resonant excitation

This paper proposes a novel one-colour Xe-Kr laser induced collisional ionization system. Considering the level scheme of the system, it finds that the initial state of the reaction--the four 4f levels with even J of Xe-can be prepared through method of four-photon resonant excitation by dye laser with wavelength of -440 nm. Absorption of an additional photon （the transfer laser） of the same wavelength will complete the laser induced collisional ionization process. The resonance enhanced ionization spectrum of Xe by four laser photons at -440nm is measured through time-of-flight mass spectrometry, this aims at the preparation of the initial state of the system proposed. The Stark broadening of the measured spectrum is observed and consistent with the previous study. Analysis of the measured resonance ionization spectrum implies the feasibility of -440 nm four-photon resonant excitation of the initial 4f state of the Xe Kr system proposed in this paper, which prepares for a further experiment of laser induced collisional ionization.     

Nonlinear Evolution of Lower-Hybrid Drift Instability in Harris Current Sheet

We perform 2.5-dimensional particle-in-cell simulations to investigate the nonlinear evolution of the lower hybrid drift instability (LHDI) in Harris current sheet. Due to the drift motion of electrons in the electric field of the excited low hybrid drift (LHD) waves, the electrons accumulate at the outer layer, and therefore there is net positive charge at the inner edge of the current sheet. This redistribution of charge can create an electrostatic field along the z direction, which then modifies the motions of the electrons along the y direction by E×B drift. This effect strongly changes the structure of the current sheet.     

Application of Cosine Zone Plates to Image Encryption

We analyse the diffraction result of optical field after Cosine zone plate, and theoretically deduce its transform matrix. Under some conditions, its diffraction distribution is a mixture of fractional Fourier spectra. Then we use Cosine zone plate and its diffraction result to image encryption. Possible optical image encryption and decryption implementations are proposed, and some numerical simulation results are also provided.     

Generation of 287 W, 5.5 ps pulses at 78 MHz repetition rate from a cryogenically cooled Yb:YAG amplifier seeded by a fiber chirped-pulse amplification system

We generate linearly polarized, 287 W average-power, 5.5 ps pulses using a cryogenically cooled Yb:YAG amplifier at a repetition rate of 78 MHz. An optical-to-optical efficiency of 41% is obtained at 700 W pump power. A 6 W, 0.4 nm bandwidth picosecond seed source at 1029 nm wavelength is constructed using a chirped-pulse fiber amplification chain based on chirped volume Bragg gratings. The combination of a fiber amplifier system and a cryogenically cooled Yb:YAG amplifier results in good spatial beam quality at large average power. Low nonlinear phase accumulation as small as 5.1 x 10(-3) rad in the bulk Yb:YAG amplifier supports power scalability to a > 10 kW level without being affected by self-phase modulation. This amplification system is well suited for pumping high-power high-repetition-rate optical parametric chirped-pulse amplifiers.     

A strain-induced birefringent double-clad fiber Bragg grating

A strain-induced birefringence double-clad (DC) fiber Bragg grating (FBG) is proposed and demonstrated.The grating is fabricated in the core of rectangular inner cladding double clad fiber by using phase mask method. By applying lateral strain on the grating, the birefringence is induced. In order to detect the birefringent effect of the grating, we use it as the output mirror of a laser. When lateral strain is applied,the grating becomes birefringent. Therefore, one reflection peak of double-clad fiber Bragg grating becomes two peaks and the laser also lases in two wavelengths. The wavelength spacing of the laser can be tuned from 0 to 0.8 nm. The absolute wavelengths for the two polarizations can be tuned 1.2 and 2.0 nm,respectively.     

The structural and optical properties of ZnO nanorod arrays

High quality vertical-aligned ZnO nanorod arrays were synthesized by a simple vapor transport process on Si (111) substrate at a low temperature of 520 °C. Field-emission scanning electron microscopy (FESEM) showed the nanorods have a uniform length of about 1 μm with diameters of 40-120 nm. X-ray diffraction (XRD) analysis confirmed that the nanorods are c-axis orientated. Selected area electron diffraction (SAED) analysis demonstrated the individual nanorod is single crystal. Photoluminescence (PL) measurements were adopted to analyze the optical properties of the nanorods both a strong UV emission and a weak deep-level emission were observed. The optical properties of the samples were also tested after annealing in oxygen atmosphere under different temperatures, deep-level related emission was found disappeared at 600 °C. The dependence of the optical properties on the annealing temperatures was also discussed.     

Swiss-Roll燃烧器催化剂结构的实验研究

实验研究了装有Pt覆盖的多孔陶瓷的Swiss-Roll燃烧器的燃烧特性,分别得到了3种不同长度的催化剂基底的熄火极限,并测量3种情况下催化剂壁面及催化剂后部空间的温度。实验结果表明,3种情况中,催化剂基底长4.5mm的燃烧器可燃范围最大,所以此长度较适合此Swiss-Roll燃烧器。从温度数据可以看出来,催化剂后部空间存在反应,且受上游催化剂表面反应强度的影响。     

Bi-Sb-Te基热电薄膜温差电池离子束溅射制备与表征

本文采用离子束溅射Bi/Te和Sb/Te二元复合靶,直接制备n型Bi₂Te₃热电薄膜和p型Sb₂Te₃热电薄膜.在退火时间同为1 h的条件下,对所制备的Bi₂Te₃薄膜和Sb₂Te₃薄膜进行不同温度的退火处理,并对其热电性能进行表征.结果表明,在退火温度为150 ℃时,制备的n型Bi₂Te₃关键词： 薄膜温差电池 2Te₃薄膜')" href="#">Sb₂Te₃薄膜 2Te₃薄膜')" href="#">Bi₂Te₃薄膜 离子束溅射