On the Upper Limits of Oxidation States in Chemistry

The concept of oxidation state ( OS ) is based on the concept of Lewis electron pairs, in which the bonding electrons are assigned to the more electronegative element. This approach is useful for keeping track of the electrons, predicting chemical trends, and guiding syntheses. Experimental and quantum‐chemical results reveal a limit near +8 for the highest OS in stable neutral chemical substances under ambient conditions. OS =+9 was observed for the isolated [IrO₄]⁺ cation in vacuum. The prediction of OS =+10 for isolated [PtO₄]²⁺ cations is confirmed computationally for low temperatures only, but hasn't yet been experimentally verified. For high OS species, oxidation of the ligands, for example, of O^?2 with formation of ^.O^?1 and O?O bonds, and partial reduction of the metal center may be favorable, possibly leading to non‐Lewis type structures.     

Thermal analysis of sulfurization of polyacrylonitrile with elemental sulfur

Thermal analysis of sulfurization of polyacrylonitrile (PAN) with elemental sulfur was investigated by thermogravimetry and differential thermal analysis of the mixture of polyacrylonitrile and elemental sulfur up to 600°C. Due to the volatilization of sulfur, the different heating rate (10 and 20 K min⁻¹) and different mixture proportion of polyacrylonitrile and elemental sulfur were adopted to run the analysis. The different heating rates make the DSC curves of sulfur different, but make the DSC curves of PAN similar. In the DSC curve of sulfur for the heating rate of 20 K min⁻¹ around 400°C, a small exothermic peak occurs at 400°C in the wide endothermic peak around 380∼420°C, indicative of that there is an exothermic reaction around 400°C. In the DSC curves of the mixture, the peaks around 320°C are exothermic as the content of sulfur is below 3.5:1 and endothermic as the content of sulfur is over 4:1, indicating that one of the reactions between PAN and sulfur takes place around 320°C. In the TG curves of the mixture, the mass losses begin at 220°C, and sharply drop down from 280°C. The curves for the low sulfur content obviously show two steps of mass loss, and curves for the high sulfur content show only one step of mass loss, indicative of more sulfur is benefit for the complete sulfurization of PAN. This study demonstrates that the TG/DSC analysis can give the parameter for the sulfurization, even if the starting mixture contains the volatile sulfur.     

Cobalt-catalyzed hydrogen desorption from the LiNH2-LiBH4 system

A doping of 5 wt% CoCl2 considerably decreases the dehydrogenation temperature of a mixture of LiNH2 and LiBH4. More that 8 wt% of hydrogen can be released at ca. 155 degrees C. X-Ray absorption near edge structure (XANES) spectroscopy indicated the formation of metallic Co after ball milling CoCl2 with LiNH2 and LiBH4. Extended X-ray absorption fine structure (EXAFS) spectroscopy measurements revealed that Co particles have poor crystallinity and are finely dispersed in the sample, which could lead to a high catalytic efficiency.     

Clean synthesis of azo compounds using Magtrieve™ in the ionic liquid [<Emphasis Type="Italic">bmim</Emphasis>][Br]

A series of azo compounds, N-aryl-2-phenyldiazenecarboxamides, and 4-substituted-1,2,4-triazoline-3,5-diones, were synthesized using Magtrieve™, a magnetically retrievable and recyclable oxidant, in the ionic liquid [bmim][Br] under neutral condition. This procedure has several advantages, such as greenness, mild reactions, simple manipulation, and reusability of reagent and solvent. Correspondence: Yanqing Peng, Shanghai Key Laboratory of Chemical Biology, Institute of Pesticides and Pharmaceuticals, East China University of Science and Technology, Shanghai 200237, China.     

Analyses of gibberellins in coconut (Cocos nucifera L.) water by partial filling-micellar electrokinetic chromatography-mass spectrometry with reversal of electroosmotic flow

In this paper, we present the results of simultaneous screening of eight gibberellins (GAs) in coconut (Cocos nucifera L.) water by MEKC directly coupled to ESI-MS detection. During the development of MEKC-MS, partial filling (PF) was used to prevent the micelles from reaching the mass spectrometer as this is detrimental to the MS signal, and a cationic surfactant, cetyltrimethylammonium hydroxide, was added to the electrolyte to reverse the EOF. On the basis of the resolution of the neighboring peaks, different parameters (i.e., the pH and concentration of buffer, surfactant concentrations, length of the injected micellar plug, organic modifier, and applied separation voltage) were optimized to achieve a satisfactory PF-MEKC separation of eight GA standards. Under optimum conditions, a baseline separation of GA standards, including GA1, GA3, GA5, GA6, GA7, GA9, GA12, and GA13, was accomplished within 25 min. Satisfactory results were obtained in terms of precision (RSD of migration time below 0.9%), sensitivity (LODs in the range of 0.8-1.9 microM) and linearity (R2 between 0.981 and 0.997). MS/MS with multiple reaction monitoring (MRM) detection was carried out to obtain sufficient selectivity. PF-MEKC-MS/MS allowed the direct identification and confirmation of the GAs presented in coconut water (CW) sample after SPE, while, the quantitative analysis of GAs was performed by PF-MEKC-MS approach. GA1 and GA3 were successfully detected and quantified in CW. It is anticipated that the current PF-MEKC-MS method can be applicable to analyze GAs in a wide range of biological samples.     

An Arbitrarily Regulated Monomer Sequence in Multi-Block Copolymer Synthesis by Frustrated Lewis Pairs

Rapid access to sequence-controlled multi-block copolymers (multi-BCPs) remains as a challenging task in the polymer synthesis. Here we employ a Lewis pair (LP) composed of organophosphorus superbase and bulky organoaluminum to effectively copolymerize the mixture of methacrylate, cyclic acrylate, and two acrylates, into well-defined di-, tri-, tetra- and even a hepta-BCP in one-pot one-step manner. The combined livingness, dual-initiation and CSC feature of Lewis pair polymerization enable us to achieve not only a trihexaconta-BCP with the highest record in 8 steps by using four-component monomer mixture as building blocks, but also the arbitrarily-regulated monomer sequence in multi-BCP, simply by changing the composition and adding order of the monomer mixtures, thus demonstrating the powerful capability of our strategy in improving the efficiency and enriching the composition of multi-BCP synthesis.     

Understanding the reactivity of the tetrahedrally coordinated high-valence d0 transition metal oxides toward the C-H bond activation of alkanes: a cluster model study

We have carried out a theoretical study on the structure-function relationship for the selective oxidation of lower alkanes (C1-C4). The H abstraction mechanism has been examined over the model catalysts of high-valence d0 transition metal oxides in the tetrahedral coordination. The intrinsic connections among the H abstraction barrier, the strengths of the O-H and the M-O bonds, the ability of electron transfer, as well as the energy gap of frontier orbitals of the oxides have been rationalized in terms of thermodynamics cycles and the frontier orbital analysis. In particular, we emphasize the role that the O-H bond strength plays in determining the reactivity of a metal oxide.     

Oriented organic islands and one-dimensional chains on a Au(111) surface fabricated by electrodeposition: an STM study

Organic islands and oriented one-dimensional (1D) chains are fabricated on a Au(111) surface by electrodeposition. The cyclic voltammograms (CVs) of Au(111) in solutions containing nitrobenzene and picric acid show an electrochemical reaction in a negative potential region, which results in irreversible reductive deposition. The deposition process is monitored by in situ electrochemical scanning tunneling microscopy (ECSTM). At the double layer potential region, for example, nitrobenzene molecules form a well-defined adlayer in a (square root(3) x square root(3)) structure. With potential shifting negative to the reductive region, nitrobenzene is reduced to hydroxyaminobenzene. Organic islands were formed first and then aggregated into ordered 1D chains. The formation of these organic islands and 1D chains is completely potential-dependent. Intriguingly, the so-prepared islands and 1D chains are well-oriented along the reconstructed lines of the underlying Au(111) substrate and stable under ambient conditions even if the sample was removed from electrolyte solution. The results reported here provide a simple and effective method to fabricate oriented organic nanodots and nanowires on a solid surface by an electrochemical technique.     

Enantioselective total syntheses of trichodermamides A and B

Starting from commercially available (-)-quinic acid, the enantioselective total syntheses of trichodermamides A and B were achieved. The key reactions involve the stereoselective construction of the oxazine ring via an intramolecular epoxide ring opening reaction and an EDCI-assisted peptide coupling reaction.     

Investigation of high shear wet granulation processes using different parameters and formulations

This study compared the granulation processes for different formulations using a laboratory-scale high shear mixer. The effects of critical process parameters (impeller speed, chopper speed and kneading time) on granule characteristics were evaluated. The characteristics of the granules studied included the size distribution, friability and morphological properties. The flow profiles of the wet mass and material deposition during the process were also studied. The results obtained showed that the effect of the impeller speed was determined by the starting material system. On the other hand, chopper speeds from 1200 to 3600 rpm and kneading times from 120 to 240 s had a consistent influence on all formulations. Moreover, it was found that the toroidal flow pattern of the wet mass could be maintained for a longer period and granules with a good spherical shape were obtained by removing the chopper during the last 120 s of the granulation process. In addition, the use of the pregelatinized starch in the formulation also led to a reduction in the wall adhesion of the material. It was concluded that the effectiveness of high shear wet granulation could be improved by choosing a proper combination of starting material and process parameters and by monitoring the mass motion during the process.