无外加催化剂条件下芳香醛与活性亚甲基化合物的缩合反应和迈克尔加成反应

在DMF溶剂中,不外加催化剂使芳香醛(1)与2,2-二甲基-1,3-二氧六环-4,6-二酮(2)发生缩合反应生成2,2-二甲基-5-芳亚甲基-1,3-二氧六环-4,6-二酮(3a～f)。在同样条件下,芳香醛与5,5-二甲基-1,3-环己二酮(4)则发生缩合和迈克尔加成反应生成2,2’-芳亚甲基双(3-羟基-5,5-二甲基-2-环己烯-1-酮)(5a～h)。用单晶X-射线分析法确定了产物5b的晶体结构。     

Study on microstructure and mechanical properties relationship of short fibers/rubber foam composites

Research on short fibers/rubber foam composites is rarely found in the literature. In this paper, microcellular rubber foams unfilled (MF), strengthened by pretreated short fibers (MFPS) and untreated short fibers (MFUS) are prepared, respectively. The microstructure and mechanical properties of the three composites have been studied via scanning electron microscope (SEM) and mechanical testing, respectively. The SEM results show that both pretreated and untreated short fibers disperse uniformly in the composites and in bidimensional orientation. Moreover, the pretreated short fibers have much better adhesion with the rubber matrix than untreated ones. The experimental results also indicate that the introduction of short fibers is mainly responsible for the great enhancement of most mechanical properties of the microcellular rubber foams, and the good interfacial adhesion of the short fibers with the matrix contributes to the more extensive improvement in the mechanical properties. It is also found that the reinforcement effect of short fibers to compressive modulus strongly depends on the density of microcellular rubber foams, the orientation of short fiber and the deformation ratio. The compressive modulus of microcellular rubber foams at the normalized density less than 0.70 and beyond 0.70 is predicted by the modified Simple Blending Model and the Halpin-Kerner Model, respectively. The theoretically predicted values are in good accordance with the experimental results.     

Synthesis of 5′‐O‐(2‐Azido‐2‐deoxy‐α‐D‐glycosyl)nucleosides and Their Antitumor Activities

The 1,3,4,6‐tetra‐O‐acetyl‐2‐azido‐2‐deoxy‐β‐D ‐mannopyranose ( 4 ) or the mixture of 1,3,6‐tri‐O‐acetyl‐2‐azido‐2‐deoxy‐4‐O‐(2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐galactopyranosyl)‐β‐D ‐mannopyranose ( 10 ) and the corresponding α‐D ‐glucopyranose‐type glycosyl donor 9 / 10 reacted at room temperature with protected nucleosides 12 – 15 in CH₂Cl₂ solution in the presence of BF₃?OEt₂ as promoter to give 5′‐O‐(2‐azido‐2‐deoxy‐α‐D ‐glycosyl)nucleosides in reasonable yields (Schemes 2 and 3). Only the 5′‐O‐(α‐D ‐mannopyranosyl)nucleosides were obtained. Compounds 21, 28, 30 , and 31 showed growth inhibition of HeLa cells and hepatoma Bel‐7402 cells at a concentration of 10 μM in vitro.     

Two N,N′‐diaryl‐2,2,2‐trichloroethane‐1,1‐diamines: hydrogen‐bonded supramolecular structures in one and two dimensions

The molecules of 2,2,2‐trichloro‐N,N′‐diphenylethane‐1,1‐diamine, C₁₄H₁₃Cl₃N₂, are linked into (040) sheets by a combination of C—H...Cl and C—H...π(arene) hydrogen bonds. In 2,2,2‐trichloro‐N,N′‐bis(4‐methylphenyl)ethane‐1,1‐diamine, C₁₆H₁₇Cl₃N₂, the molecules are linked into C(7) chains by two independent C—H...Cl hydrogen bonds and one Cl...Cl contact.     

在Mo-Bi-Ce/SiO2催化剂上甲醇氧化制甲醛的Redox机理及其动力学

用外循环无梯度反应器研究了甲醇氧化制甲醛的动力学。动力学实验结果用二步骤Redox模型描述。动力学方程中的参数用线性最小二乘法估计。甲醇的反应级数m和氧的反应级数n与温度有关, m与n的和接近于1, 反应级数的变化可用Redox机理动力学解释。不同处理催化剂的XPS分析结果证实, 反应按Redox机理进行。     

阳极氧化与超临界干燥结合制备多孔硅

多孔硅（PS）在室温下发射强可见光，这一发现在国际上引起极大关注，成为材料科学、半导体物理和化学以及信息科学领域研究的热点［1，2］．最近三、四年，国内外对PS制备工艺、影响PS发光的因素、PS发光机制、PS应用前景等方面进行了广泛的研究［2］，但有一些基本问题仍待解决，如关于PS发光机制尚存在分歧；PS电致发光效率低，离应用差距甚远；高多孔度PS微孔结构不稳定等．PS微孔内溶剂蒸发过程中，由于毛细管张力的存在，造成微孔骨架受力不匀．强的应力使PS骨架脆弱，甚至微孔结构坍缩，从而导致PS结构不稳定．对于高多孔度…     

Simultaneous determination of eight components in Angelica sinensis based on UHPLC‐ESI‐MS/MS method for quality evaluation

A method employing ultra‐high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) for determination of eight components including ferulic acid, senkyunolide A, butylphthalide, ligustilide, butylidenephalide, senkyunolide I, senkyunolide H and levistolide A in Angelica sinensis was established. The separation was carried out using a Waters ACQUITY UHPLC BEH C₁₈ column with gradient elution with 0.1% formic acid aqueous and acetonitrile at a flow rate of 0.4 mL/min. Good linearity was attained with R² of 0.9983–0.9998 in wide concentration ranges. The method had limit of detection (LOD) and quantitation (LOQ) in the range of 0.42–6.98 ng/mL and 1.39–23.28 ng/mL, respectively. Intra‐ and inter‐day precisions varied with relative standard deviations (RSDs) from 0.33% to 0.88% and 0.37% to 1.04%, respectively. Moreover, the average recoveries were in a satisfactory range of 92.7%–102.1% with RSDs of less than 3.60%. Finally, the method was successfully applied to analyze 19 batches of A. sinensis samples grown in Min County, Gansu province, China, as well as that collected in other regions. The findings indicated that the established method is reliable and may thus be applied as a powerful tool for qualitative and quantitative analysis of components in A. sinensis, which has its implications in quality control of A. sinensis.     

改性阳离子交换树脂的制备、表征及催化合成双酚F

用浸渍法制备了改性阳离子交换树脂,通过红外光谱、热重分析和扫描电镜等对其进行了分析,探讨了不同改性树脂对以苯酚和甲醛为原料催化合成双酚F收率的影响。当等摩尔比Al Cl3和Ti Cl4加入总量为树脂质量的8%,反应温度为80℃,改性时间为10h,Al Cl3-Ti Cl4改性阳离子交换树脂催化合成双酚F,其收率高达90.02%,比未改性或Al Cl3单独改性树脂的催化效果都好,其重复利用率也优于后两者。结果说明,Al Cl3-Ti Cl4改性阳离子交换树脂催化性能好,是一种环境友好高效合成双酚F的催化剂。