Inclusion Complexes of Coenzyme Q10 with Polyamine‐Modified β‐Cyclodextrins: Characterization,Solubilization, and Inclusion Mode

The inclusion‐complexation behavior of coenzyme Q10 (CoQ10) with the three polyamine‐modified β‐cyclodextrins (CDs) 1 – 3 was investigated in both solution and the solid state by means of NMR, XRD, and FT‐IR spectroscopy. The results showed that the apparent solubility of CoQ10 increased linearly upon addition of hosts 1 – 3 , giving A_L‐type phase‐solubility curves. These hosts 1 – 3 were able to solubilize CoQ10 to high levels, up to 1.35, 1.52, and 1.44 mg/ml (calculated as CoQ10), respectively. The host 2 with a moderate‐length chain is the most suitable for inclusion complexation of CoQ10. Accroding to the ROESY experiments, the MeO groups of CoQ10 and the tether of 2 can be co‐included into the cavity of β‐CD through the induced‐fit interaction between host and guest. The binding ability of modified β‐CDs 1 – 3 upon complexation with CoQ10 are discussed from the viewpoints of the size/shape‐matching relationship and the induced‐fit concept between host CDs and guest CoQ10 molecule.     

Two New Cytotoxic Alkaloids from Mappianthus iodoides Hand.‐Mazz.

Two new alkaloids, mappine A ( 1 ) and mapposidic acid ( 2 ), together with eleven known compounds, were isolated from the stems of Mappianthus iodoides Hand.‐Mazz. Their structures were elucidated by means of spectroscopic and mass‐spectrometric analyses, particularly 1D‐ and 2D‐NMR spectroscopy. The cytotoxic activities of the two new alkaloids were also evaluated.     

Determination of pharmaceuticals in biosolids using accelerated solvent extraction and liquid chromatography/tandem mass spectrometry

An analytical method was developed to quantitatively determine pharmaceuticals in biosolid (treated sewage sludge) from wastewater treatment plants (WWTPs). The collected biosolid samples were initially freeze dried, and grounded to obtain relatively homogenized powders. Pharmaceuticals were extracted using accelerated solvent extraction (ASE) under the optimized conditions. The optimal operation parameters, including extraction solvent, temperature, pressure, extraction time and cycles, were identified to be acetonitrile/water mixture (v/v 7:3) as extraction solvent with 3 extraction cycles (15 min for each cycle) at 100 °C and 100 bars. The extracts were cleaned up using solid-phase extraction followed by determination by liquid chromatography coupled with tandem mass spectrometry. For the 15 target pharmaceuticals commonly found in the environment, the overall method recoveries ranged from 49% to 68% for tetracyclines, 64% to 95% for sulfonamides, and 77% to 88% for other pharmaceuticals (i.e. acetaminophen, caffeine, carbamazepine, erythromycin, lincomycin and tylosin). The developed method was successfully validated and applied to the biosolid samples collected from WWTPs located in six cities in Michigan. Among the 15 target pharmaceuticals, 14 pharmaceuticals were detected in the collected biosolid samples. The average concentrations ranged from 2.6 μg/kg for lincomycin to 743.6 μg/kg for oxytetracycline. These results indicated that pharmaceuticals could survive wastewater treatment processes, and accumulate in sewage sludge and biosolids. Subsequent land application of the contaminated biosolids could lead to the dissemination of pharmaceuticals in soil and water environment, which poses potential threats to at-risk populations in the receiving ecosystems.     

Characterization of aquatic dissolved organic matter by asymmetrical flow field-flow fractionation coupled to UV-Visible diode array and excitation emission matrix fluorescence

Flow field-flow fractionation (FlFFF) with on-line UV/Visible diode array detector (DAD) and excitation emission matrix (EEM) fluorescence detector has been developed for the characterization of optical properties of aquatic dissolved organic matter (DOM) collected in the Otonabee River (Ontario, Canada) and Athabasca River (Alberta, Canada). The molecular weight (MW) distribution of DOM was estimated using a series of organic macromolecules ranging from 479 to 66,000 Da. Both the number-average (M_n) and weight-average (M_w) molecular weights of Suwannee River fulvic acid (SRFA) and Suwannee River humic acid (SRHA) determined using these macromolecular standards were comparable to those obtained using polystyrenesulfonate (PSS) standards, suggesting that organic macromolecules can be used to estimate MW of natural organic colloids. The MW of eight river DOM samples determined by this method was found to have an M_n range of 0.8–1.1 kDa, which agrees with available literature estimates. The FlFFF-DAD-EEM system provided insight into the MW components of river DOM including the optical properties by on-line absorbance and fluorescence measurement. A red-shift in emission and excitation wavelength maxima associated with lower spectral slope ratios (S_R = S_275–295:S_350–400) was related to higher MW DOM. However, DOM of different origins at similar MW also showed significant difference in optical properties. A difference of 47 and 40 nm in excitation and emission peak C maxima was found. This supports the hypothesis that river DOM is not uniform in size and optical composition.     

Novel molecularly imprinted microsphere using a single chiral monomer and chirality-matching (S)-ketoprofen template

We designed and synthesized a cinchonine derivative to be used as a novel chiral monomer. It was employed in a dual role of functional monomer and cross-linking monomer, displaying multi-binding sites for the template (S)-ketoprofen. Monodisperse molecularly imprinted core-shell microspheres were prepared using surface imprinting method on silica gel. The results show a substantial synergistic effect in the enantioselective recognition, confirming our initial hypothesis. Computational simulation of the monomer and template pre-arrangement strongly supports our proposed chiral recognition mechanism for the imprinted microspheres.     

A facile strategy for synthesis of multilayer and conductive organo-silica/polystyrene/polyaniline composite particles

By means of a facilely designed strategy, we successfully fabricated the multilayer and conductive organo-silica/polystyrene/polyaniline (organo-silica/PS/PANi) composite particles. First, organo-silica/PS core/shell composite particles were synthesized by seeded emulsion polymerization and the vinyl groups located on the surface of organo-silica nanoparticles were used to induce in situ polymerization of styrene. The influence of the route of the addition of styrene on the morphology of organo-silica/PS composite particles was investigated. Then, the coating of organo-silica/PS composite particles with PANi was achieved by virtue of the "Swelling-Diffusion-Interfacial-Polymerization Method" (SDIPM). The whole preparation process was monitored by transmission electron microscope, scanning electron microscope, Fourier transform infrared, Raman spectroscopy, dynamic light scattering, and thermogravimetry. As a result, the multilayer and conductive organo-silica/PS/PANi nanocomposites possessed of a uniform size and well-defined morphology, and furthermore, their structure could be well controlled by simply changing the weight ratio of aniline/PS.     

Lanthanide-mediated supramolecular cages and host-guest interactions

The structure and thermodynamic properties of lanthanide complexes with a new tripodal ligand L2 have been elucidated using different physicochemical methods. At stoichiometric ratios, the tetrahedral three-dimensional complexes with lanthanide cations are formed in acetonitrile with good stabilities. Despite minor structural changes comparing to previously investigated tripodal ligands, the resulting assembly exhibits different features revealed with the crystal structure of [Eu(4)L2(4)](OH)(ClO(4))(11) (orthorhombic, Pbcn). Interestingly, the highly charged edifice contains an inner cage encapsulating a perchlorate anion. Such lanthanide mediated cage-like assemblies are rare, and may be of interest for different sensing applications. Indeed, the anionic guest can be exchanged with different anions. The related host-guest equilibria were investigated with NMR techniques. Various aspects of these reactions are qualitatively discussed.     

Exhaustive chlorination of [B12H12]2- without chlorine gas and the use of [B12Cl12]2- as a Supporting anion in catalytic hydrodefluorination of aliphatic C-F bonds

The fully chlorinated closo-dodecaborate salt Cs(2)[B(12)Cl(12)] was prepared in high yield from Cs(2)[B(12)H(12)] and SO(2)Cl(2) in acetonitrile at refluxing temperature. [Ph(3)C](2)[B(12)Cl(12)] was obtained by simple metathesis reactions. Catalytic hydrodefluorination of benzotrifluoride sp(3) C-F bonds was accomplished using [Ph(3)C](2)[B(12)Cl(12)] as a precatalyst and Et(3)SiH as a stoichiometric reagent. Full consumption of the sp(3) C-F bonds in p-FC(6)H(4)CF(3) and C(6)F(5)CF(3) with a turnover number up to 2000 was achieved.     

Structure of the alkali-metal-atom + strontium molecular ions: towards photoassociation and formation of cold molecular ions

The potential energy curves, permanent and transition dipole moments, and the static dipolar polarizability, of molecular ions composed of one alkali-metal atom and a strontium ion are determined with a quantum chemistry approach. The molecular ions are treated as effective two-electron systems and are treated using effective core potentials including core polarization, large gaussian basis sets, and full configuration interaction. In the perspective of upcoming experiments aiming at merging cold atom and cold ion traps, possible paths for radiative charge exchange, photoassociation of a cold lithium or rubidium atom and a strontium ion are discussed, as well as the formation of stable molecular ions.     

Syntheses, structures, and magnetic properties of low-dimensional heterometallic complexes based on the versatile building block [(Tp)Cr(CN)3]-

Using the tricyano precursor (Bu(4)N)[(Tp)Cr(CN)(3)] (Bu(4)N(+) = tetrabutylammonium cation; Tp = tris(pyrazolyl)hydroborate), a pentanuclear heterometallic cluster [(Tp)(2)Cr(2)(CN)(6)Cu(3)(Me(3)tacn)(3)][(Tp)Cr(CN)(3)](ClO(4))(3)·5H(2)O (1, Me(3)tacn = N,N',N'-trimethyl-1,4,7-triazacyclononane), three tetranuclear heterometallic clusters [(Tp)(2)Cr(2)(CN)(6)Cu(2)(L(OEt))(2)]·2.5CH(3)CN (2, L(OEt) = [(Cp)Co(P(O)(OEt)(2))(3)], Cp = cyclopentadiene), [(Tp)(2)Cr(2)(CN)(6)Mn(2)(L(OEt))(2)]·4H(2)O (3), and [(Tp)(2)Cr(2)(CN)(6)Mn(2)(phen)(4)](ClO(4))(2) (4, phen = phenanthroline), and a one-dimensional (1D) chain polymer [(Tp)(2)Cr(2)(CN)(6)Mn(bpy)](n) (5, bpy = 2,2'-bipyridine) have been synthesized and structurally characterized. Complex 1 shows a trigonal bipyramidal geometry in which [(Tp)Cr(CN)(3)](-) units occupy the apical positions and are linked through cyanide to [Cu(Me(3)tacn)](2+) units situated in the equatorial plane. Complexes 2-4 show similar square structures, where Cr(III) and M(II) (M = Cu(II) or Mn(II)) ions are alternatively located on the rectangle corners. Complex 5 consists of a 4,2-ribbon-like bimetallic chain. Ferromagnetic interactions between Cr(III) and Cu(II) ions bridged by cyanides are observed in complexes 1 and 2. Antiferromagnetic interactions are presented between Cr(III) and Mn(II) ions bridged by cyanides in complexes 3-5. Complex 5 shows metamagnetic behavior with a critical field of about 22.5 kOe at 1.8 K.