Rugged distal tips for CO2 laser medicine

Low-loss and rugged distal tips for CO₂ laser have been proposed and fabricated based on a commercially available stainless steel (St) pipe. A method of smoothening the inner surface of the St pipe with a rough inner surface is put forward. Fabrication parameters, transmission properties, and mechanical strength of the cyclic olefin polymer-coated silver hollow St distal tip are experimentally discussed.     

探针尖带金属微粒的光子扫描隧道显微镜成像数值模拟

引入了色散介质的时域有限差分法散射场方程,并针对光子扫描隧道显微镜的带金属尖光纤扫描成像问题进行三维的数值模拟。在考虑了光纤和样品相互作用的情况下,采用等效入射波法设置入射波,探针扫描模式为等高扫描模式,从成像分辨力和灵敏度的角度,比较了不同入射角、不同的光纤一样品间距,不同金属类型,及不同金属尖大小的成像情况。数值模拟结果显示,带金属颗粒光纤探针尖的光子扫描隧道显微镜在成像分辨力和灵敏度上有显著的改进,而带不同类型金属颗粒情况下对分辨力影响不大,灵敏度是银最好。     

原子力与光子扫描隧道组合显微镜

介绍了超高分辨光于扫描隧遭显微镜（PSTM）的计冗历程,为解决第一代（单光束照明）光千扫捕隧逼显傲镜中存在人为假象和样品光学图像与形貌图像难于分离两个难题,用“对称双光束照明方法消假象,用原子力与光子扫描隧道组合显微镜（AF／PSTM）图像分解方法分离样品光学透过率、折射率与形貌图像。研制成功新一代原子力与光子扫描隧道组合显微镜（AF／PSTM）样机。该样机在一次扫描中已获得两幅原子力显微镜图像（形貌与相位）和两幅光学图像（透过率和折射率）,有效地减少了假象,分解了样品光学折射率、透过率与形貌图像。     

Electro-optically Q-switched Nd:YVO4 slab laser with a high repetition rate and a short pulse width

We report on a compact and highly efficient diode-end-pumped TEM00 Nd:YVO4 slab laser with an output power of 103 W and beam quality M2 < or = 1.5. The optical-to-optical efficiency was 41.5%. In electro-optically Q-switched operation, 83 W of average power at a pulse-repetition rate of 50 kHz with a pulse length of 11.3 ns was obtained. At a pulse-repetition rate of 10 kHz, 5.6 mJ of pulse energy, and 870 kW of peak power were measured.     

Determination of bulk viscosity of liquid water via pulse duration measurements in stimulated Brillouin scattering

We present a method by which to determine the bulk viscosity of water from pulse duration measurements of stimulated Brillouin scattering （SBS）. Beginning from a common model of Brillouin scattering, the bulk viscosity is shown to play an important role in Brillouin linewidth determination. Pulse durations of SBS back-reflected optical pulses are measured over the temperature range of 5-40℃. SBS linewidths are de- termined via Fourier transformation of the time-domain results, and the bulk viscosity of water is measured and derived from the obtained values. Our results show that the proposed method for measurement of pulse durations is an effective approach for determining bulk viscosity. The method can be easily extended to determine bulk viscosities of other Newtonian liquids.     

丙烯腈-尿素包合物的形成过程及特征

利用差示扫描量热法(DSC)和X射线衍射(XRD)研究了在不同丙烯腈/尿素投料比情况下的丙烯腈-尿素包合物的形成过程和组成. 实验结果表明DSC是一种研究包合物的客主比及分解热的有效方法. 测定了丙烯腈-尿素包合物的客主比和分解热分别为1.17和5361.53 J/mol. 同时发现丙烯腈-尿素包合物的形成依赖于冷冻时间,在足够长的冷冻时间之后丙烯腈-尿素包合物的组成达到稳定状态. 实验结果表明,丙烯腈分子可能是采用堆叠的方式排布在尿素晶道结构中. XRD结果表明只要丙烯腈分子进入尿素晶格中,丙烯腈-尿素包合物的结构便形成了,并且这种结构与形成过程终了时的结构是一致的. 只要丙烯腈是足量的,包合物中的丙烯腈分子排列会随冷冻时间的延长而增长,直到尿素的晶道结构被丙烯腈分子填满.     

Pixel-based partially coherent image method for maskless lithography system

Maskless lithography (ML) provides a fast and low-cost method for projecting the images of IC or micro features onto photoresist. However, it needs an efficient simulation method to evaluate the performance of lithography process. In this paper, a pixel-based partially coherent image method for digital micro-mirror device (DMD) based ML is proposed based on the linear invariant theory. In our method, the mask is sampled by DMD pixel (each pixel corresponding to each micro-mirror) and expressed by rect function. Using the shift theory of Fourier transform and the stacked pupil operator approach, we build a matrix Φ for system response function of rect function. If the DMD pixel state matrix is S, then the aerial image can be calculated with two matrix multiplication I(x,y) = SΦ.     

低气压条件下氢气潘宁放电的模拟分析

为更好地理解低气压、弱电离条件下潘宁离子源放电过程中离子和电子的动力学行为, 通过建立二维轴对称模型, 采用粒子模拟与蒙特卡罗相结合(PIC/MCC)的方法, 考虑了电子与氢气之间的弹性碰撞、激发、电离以及氢原子、离子之间的弹性碰撞和电荷交换等过程, 对微型氢气潘宁离子源放电和引出过程进行了数值研究. 考察了磁场位形、壁面二次电子发射系数、引出电压和充气压力对放电过程的影响, 得到了实验中难以诊断得到的放电腔内电子与离子数密度分布, 阳极电流、引出极离子电流、单原子氢离子比例和双原子氢离子比例等宏观参数与实验结果相一致. 通过仿真使得对氢气潘宁放电机制的研究从定性过渡到定量, 这对于潘宁离子源的设计和改进具有重要意义. 关键词： 潘宁放电 氢气 粒子模拟 蒙特卡罗     

液滴振荡模型及与数值模拟的对比

由于碰撞壁面后液滴内部流动的复杂性, 以及气-液-固三相间的相互作用, 对液滴碰撞壁面形态变化的数学理论研究有较大的难度, 因此所见者多为实验和数值模拟. 本文通过对液滴受力状态的分析, 得到了惯性力、黏性力和表面张力带经验系数的表达式, 并进一步建立了液滴碰撞壁面振荡模型, 得到了液滴铺展半径的振荡表达式, 以及表面张力、黏性系数等参数对液滴铺展的影响. 最后通过与液滴衰减振荡数值模拟结果的对比, 确定了液滴振荡模型中的修正系数, 验证了模型的可行性. 关键词： 液滴碰撞 振荡 铺展半径/高度 数值模拟     

Optical properties of dye-doped zirconia films by spectroscopic ellipsometry

The optical properties of zirconia films doped with rhodamine 6G and oxazine 725 by the sol-gel process were investigated using spectroscopic ellipsometry (SE). Accurate refractive index n and the extinction coefficient k were determined using a three-oscillator classical Lorentz model in the wavelength range of 300-800 nm. The derived refractive index of dye-doped films exhibited anomalous dispersion in the absorption region. Wavelength tunable output lasing action yellow and near-infrared wavelength region was achieved by DFB configuration using zirconia films doped with R6G and oxazine 725.