Oxidative Methyl Esterification of Primary Alcohols with Iodine‐Mediated Poly[4‐(Diacetoxyiodo)Styrene]

An operationally simple oxidative methyl esterification of primary alcohols in good yields using an iodine‐mediated poly[4‐(diacetoxyiodo)styrene] in methanol at room temperature is described. The polymeric reagent can be regenerated and reused as an environmentally benign reagent.     

A General, Highly Efficient Ullmann C-O Coupling Reaction under Microwave Irradiation and the Effects of Water

A general, rapid and highly efficient method for the synthesis of diaryl ethers under the assistance of microwave irradiation was described. A series of diaryl ethers were prepared by direct coupling of phenols and aryl halides in good to excellent yields in anhydrous DMF or NMP at 150 ℃ within 20 rain. The presence of water was found to have a significant impact on the Ullmann C-O coupling reaction between aryl halides and phenols under microwave irradiation.     

Determination of Osmium(VIII) by Flow Injection-Kinetic Methods Using Bromopyrogallol Red and Hydrogen Peroxide

A new flow injection-kinetic method has been developed for the determination of trace amount of osmium(WI), based on its catalytic effect on the bromopyrogallol red and hydrogen peroxide reaction. The reaction is followed spectrophotometrically by measuring the decrease in absorbance at 559 nm. The calibration graph for osmium(VIII) is linear over the range from 0.0040 to 0.10 μg/ml and the detection limit and sampling frequency are 0.0030 μg/ml and 47 per hour, respectively. The proposed method was applied to the determination of trace amounts of osmium in refined ores and chlorination residues with satisfactory results.     

Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

A fluorescence spectroscopic study of the interaction between epristeride and bovin serum albumine and its analytical application

A new spectrofluorimetric method to determine epristeride (EP) has been developed, which based on the EP has a strong ability to quench the intrinsic fluorescence of bovine serum albumin (BSA). There was the relationship between the fluorescence quenching intensity of BSA (ΔF = F_BSA − F_BSA-EP) and the concentration EP. The quenching mechanism was investigated with the quenching type, the association constants, the number of binding sites and basic thermodynamic parameters. The method had been successfully applied to the analysis of EP in real samples and the obtained results were in good agreement with the results of official method-HPLC.     

开放式声化学反应体系中的反应动力学

采用气液传质的双膜理论建立了开放体系中声化学反应的动力学模型，同时用声源频率为500 kHz，声强为3 W·cm^-2的超声波在开放式声化学反应器内引发被空气饱和溶解的KI纯水溶液中的声化学反应，并检测反应过程中溶液的电导率，pH值改变及KI溶液中I₂的析出量，结果表明，它们与超声辐照时间之间呈线性关系，与理论模型吻合。     

Chains, ladders and sheets of d metal–organic polymers generated from the flexible bipyridyl ligands

By use of the three-layer diffusion method, reactions of flexible bipyridyl ligands (4,4′-bpp or 3,3′-bpp) with M(II) salts (M = Zn, Cd) and multi-carboxylate ligands resulted in the formation of four interesting d¹⁰ metal–organic coordination polymers: [Zn(μ-4,4′-bpp)Br₂]_n (1), [Zn(μ-4,4′-bpp)(1,2-bdc)]_n · nH₂O (2), [Zn(μ-3,3′-bpp)(1,3-bdc)]_n · nCH₃OH · 2nH₂O (3) and [Cd(μ-3,3′-bpp)(C₄H₂O₄)]_n · 3nH₂O (4) (4,4′-bpp = 2,2′-bis(4-pyridylmethyleneoxy)-1,1′-biphenylene; 3,3′-bpp = 2,2 ′-bis(3-pyridylmethyleneoxy)-1,1′-biphenylene; bdc=benzenedicarboxylate, C₄H₄O₄ = fumaric acid). Complex 1 has a 2D sheet structure consisting of two unusual zigzag Zn(II) chains which are nearly perpendicular to each other. Complex 2 is comprised of two-leg ladders, in which [Zn(4,4′-bpp)] chains serve as the side rails and 1,2-bdc ligands serve as the cross rungs. In complex 3, every two 1,3-bdc ligands connect the neighbouring Zn(II)-3,3′-bpp dimetallic rings in η¹ coordination modes into an interesting chain structure. Complex 4 consists of an anionic macrocycle-containing cadmium dicarboxylate sheets that are separated by 3,3′-bpp. These d¹⁰ metal complexes exhibit high thermal stabilities and strong luminescence efficiencies.     

纳米固体超强酸SO42-/Fe2O3的制备及其催化合成乙酸乙酯

将Fe₂O₃纳米粉体经一定浓度的H₂SO₄浸泡活化后制成纳米固体超强酸SO₄^2-/Fe₂O₃,将其用于催化合成乙酸乙酯以考察其活性。利用均匀设计分析了超强酸制备过程及酯化反应过程中各因素的影响,研究结果表明较好的制备条件是:H₂SO₄浓度:2.5mol·L^-1;浸泡时间:1h;活化温度:167℃;活化时间:1h,此时获得的固体超强酸SO₄^2-/Fe₂O₃的粒径小于50nm。当催化剂用量为冰乙酸质量的5%,n(乙醇)∶n(冰乙酸)为3∶1,反应3.5h后乙酸的转化率高于80%。该催化剂经H₂SO₄溶液浸泡、活化再生后可重新使用,推断出其酸强度H₀<-14.5。     

聚苯乙烯磺酸掺杂聚苯胺的合成

以苯胺（An）为单体，过硫酸铵（APS）为氧化剂，在聚苯乙烯磺酸（PSSA）的水溶液中，合成了可完全溶于水的PSSA掺杂PAn。研究了An浓度，PSSA浓度，APS浓度，APS的滴加时间，反应时间及温度对An聚合反应及其产物的水溶性，导电性及特性粘度[η]的影响。结果表明：在比较宽的实验条件下，都可以合成出具有良好导电性的可溶于水的PSSA掺杂PAn；其中当An：PSSA:APS的摩尔比为1．7：2．5：1，APS溶液的滴加时间为3h，反应时间为1h，反应温度为14℃时，得到的掺杂PAn导电率最高达0．156S／cm。     

Self-assembly of amphiphilic hexapyridinium cations at the air/water interface and on HOPG surfaces.

Mono- and multilayers of a novel amphiphilic hexapyridinium cation with six eicosyl chains (3) are spread at the air/water interface as well as on highly ordered pyrolytic graphite (HOPG). On water, the monolayer of 3 is investigated by recording surface pressure/area and surface potential/area isotherms, and by Brewster angle microscopy (BAM). Self-organized tubular micelles with an internal edge-on orientation of molecules form at the air/water interface at low surface pressure whereas multilayers are present at high surface pressure, after a phase transition. Packing motifs suggesting a tubular arrangement of the constituting molecules were gleaned from atomic force microscopy (AFM) investigations of Langmuir-Blodgett (LB) monolayers being transferred on HOPG at different surface pressures. These LB film structures are compared to the self-assembled monolayer (SAM) of 3 formed via adsorption from a supersaturated solution, which is studied by scanning tunnelling microscopy (STM). On HOPG the SAM of 3 consists of nanorods with a highly ordered edge-on packing of the aromatic rings and an arrangement of alkyl chains which resembles the packing of molecules at the air/water interface at low surface pressure. Additional details of the molecular packing were gleaned from single-crystal X-ray structure analysis of the hexapyridinium model compound 2b, which possesses methyl instead of eicosyl residues.