氯过氧化物酶的手性催化活性在有机合成中的应用

氯过氧化物酶（CPO）作为过氧化物酶家族中的一员对多种有机底物表现出了广泛的催化活性。自上世纪60年代被发现以来，CPO在有机合成中的应用一直是一个研究热点。它作为一种生物催化剂能催化广泛的底物合成手性化合物，且有高的产率和高的对映选择率。本文综述了氯过氧化物酶在手性有机合成中的应用，重点关注了卤化、醇氧化、羟基化、环氧化、磺化氧化等反应，并讨论了目前在该领域所面临的问题及今后的发展趋势。     

Study of the Fluorescence System of Europium–Enoxacin and its Applications

 This paper is the study of the fluorescence enhancement of Eu³⁺-1-ethyl-6-fluoro-4-oxo-7-(1-piperazinyl)-1,8-naphthyridin-3-carbonic acid (enoxacin, EFLX) system by surfactants. It was found that sodium dodecylbenzenesulfonate (SDBS) exhibits great enhancement on the fluorescence of the Eu-EFLX system. The molar ratio is 1:2:1 for Eu:EFLX: SDBS. Under the optimum conditions, the fluorescence intensity is a linear function of europium in the range of 1.0 × 10⁻⁸ ∼ 5.0 × 10⁻⁶ mol/L, the detection limit is 1.0 × 10⁻⁹ mol/L. The application of the Eu-EFLX-SDBS system for the determination of trace europium in rare earth samples gave satisfactory results. Received October 19, 2000. Revision August 10, 2001.     

Simultaneous determination of noradrenaline and dopamine in Portulaca oleracea L. by capillary zone electrophoresis

A simple and rapid capillary electrophoretic method was developed for the simultaneous determination of noradrenaline (NA) and dopamine (DA) in Portulaca oleracea L. The buffer solution used in this method was 40 mM tris (hydroxymethyl) aminomethane (Tris)-H3PO4 at pH 2.00 containing 15% methanol. The effects of pH value, organic modifier, and applied voltage were investigated. The linear ranges of NA and DA were 0.5-100 microg/mL (r=0.9952) and 6.25-200 microg/mL (r=0.9992), respectively. The relative standard deviations of the corrected peak area were 6.73% and 4.26%, respectively. NA and DA in Portulaca oleracea L. were simultaneous determined successfully within 5.6 min. In this way, the contents of NA and DA in different parts (stem, leaves, and seeds) of P. oleracea L. and in different extracts of leaves with different solvents (distilled water, 50% methanol, and methanol) were studied.     

二碘化钐还原硫代碳酸酯

在ＳｍＩ＿２－ＨＭＰＡ－ＴＨＦ－ｔ－ＢｕＯＨ体系中，硫代碳酸酯的酰硫键发生还原断裂反应，得到相应的二硫醚产物。     

Continuation calculations of boron- (aluminum-, titanium-, and nickel-) doped La13 clusters

In this work, we have calculated boron-, aluminum-, titanium-, and nickel-doped La13 clusters by DMOL method based on the density-functional theory. Two doping modes are employed: surface and center doping. The boron, aluminum, and nickel atoms prefer to occupy the surface sites while the titanium atom prefers to occupy the center site. The doped La13 clusters with these four kinds of atoms have lower binding energy than pure La13 clusters. The icosahedral isomers are of lower binding energy than cubotahedral and decahedral isomers for La12B(-1), La12Al(-1), and La12Ni, while doping makes the cubotahedral La12Ti stable with a binding energy a little lower than icosahedral La12Ti. There are electronic shell effects in icosahedral La12B(-1) and La12Al(-1). The icosahedral La12B(-1) is promising to be formed during the doped process experimentally. Furthermore, we have also discussed the distorted structures of center doping by bond lengths, density of states, and charge transfers.     

Intermolecular potential energy surface and spectra of He-HCl with generalization to other rare gas-hydrogen halide complexes

A two-dimensional (rigid monomer) intermolecular potential energy surface (PES) of the He-HCl complex has been obtained from ab initio calculations utilizing the symmetry-adapted perturbation theory (SAPT) and an spdfg basis set including midbond functions. The bond length in HCl was chosen to be equal to the expectation value in the ground vibrational state of isolated HCl. The rigid-monomer potential should be a very good approximation to the complete (three-dimensional) potential for H-Cl distances corresponding to the lowest vibrational levels of the monomer since the He-HCl interaction energy was found to be only weakly dependent on the HCl bond length in this region, at least as compared to systems such as Ar-HF. The calculated points were fitted using an analytic function with ab initio computed asymptotic coefficients. As expected, the complex is loosely bound, with the dispersion energy providing the majority of the attraction. Our SAPT PES agrees with the semiempirical PES of Willey et al. [J. Chem. Phys. 96, 898 (1992)], in finding that, atypically for rare gas-hydrogen halide complexes including the lighter halide atoms, the global minimum is on the Cl side (with intermonomer separation 3.35 A and depth of 32.8 cm(-1)), rather than on the H side, where there is only a local minimum (3.85 A, 30.8 cm(-1)). The ordering of the minima was confirmed by single-point calculations in larger basis sets and complete basis set extrapolations, and also using higher levels of theory. We show that the opposite findings in the recent calculations of Zhang and Shi [J. Mol. Struct: THEOCHEM 589, 89 (2002)] are due to the lack of midbond functions in their basis set. Despite the closeness in depth of the two linear minima, the existence of a relatively high barrier between them invalidates the assumption of isotropy, a feature of some literature potentials. The trends concerning the locations of minima within the family of rare gas-hydrogen halide complexes are rationalized in terms of the physical components of the intermolecular forces and related to monomer properties. The accuracy of the SAPT PES was tested by performing calculations of rovibrational levels. The transition frequencies obtained were found to be in excellent agreement (to within 0.02 cm(-1)) with the measurements of Lovejoy and Nesbitt [J. Chem. Phys. 93, 5387 (1990)]. The SAPT PES predicts a dissociation energy for the complex of 7.74 cm(-1) which is probably more accurate than the experimental value of 10.1+/-1.2 cm(-1). Our analysis of the ground-state rovibrational wave function shows that the He-HCl configuration is favored over the He-ClH configuration despite the ordering of minima. This is due to the greater volume of the well in the former case. We have also determined positions and widths of three low-lying resonance states through scattering calculations. These predictions are expected to be more accurate than values derived from experiment.     

Effects of alloying on the chemistry of CO and H2S on Fe surfaces

Deleterious gases such as CO and H(2)S can cause degradation of steel by reacting with the metal surface. Here we consider whether alloying the steel surface might be able to inhibit these damaging surface reactions by raising the barriers to molecular dissociation. We employ first-principles density functional theory techniques to investigate the elementary reaction pathways and barriers for CO and H(2)S on FeAl and Fe(3)Si surfaces and compare them with pure Fe surfaces (as a model for steel). We find that H(2)S dissociates on iron surfaces much more easily than CO does. Although FeAl surfaces raise the barriers for H(2)S dissociation, they significantly lower the barriers for CO dissociation. On the other hand, Fe(3)Si surfaces raise the barriers for CO dissociation, but they are as vulnerable as Fe surfaces to H(2)S dissociation. Our findings suggest that alloying iron with Al or Si is unlikely to simultaneously increase its resistance to the initial stages of chemical degradation by CO and H(2)S.     

Regioselective Re(I)-catalyzed coupling of terminal alkynes, Et2NH, and CO2 leading to anti-Markovnikov adducts

ReBr(CO)₅-catalyzed addition of Et₂NH and CO₂ to terminal alkynes afforded anti-Markovnikov adducts of alkenyl carbamates in good to excellent yield and high regioselectivity.     

Enhanced electrical conductivity in chemically modified carbon nanotube/methylvinyl silicone rubber nanocomposite

Chemically modified multiwalled carbon nanotubes/methlyvinyl silicone rubber (m-MWNT/VMQ) nanocomposites with relatively good dispersion of nanotubes were prepared by treating the surface of MWNT using γ-aminopropyltriethoxy silane (KH550). Significant enhanced electrical conductivity was discovered in the m-MWNT/VMQ nanocomposites. The results could be attributed a strong interaction between m-MWNT and VMQ which was from the chemically modification of the surface for MWNT. The electrical property was also discussed in order to understand the percolation and electrical transport mechanism. The m-MWNT/VMQ nanocomposites with high conductivity in this study are promising application as one of novel functional materials.     

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐Molybdate(II) Anions: Synthesis,Spectroscopy, and Density Functional Theory Calculations

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐molybdate‐(II) anions, [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo), which are novel weakly coordinating anions that contain a metal carbonyl/nitrosyl moiety, have been generated in fluorosulfonic acid and completely characterized by multinuclear NMR, IR, and Raman spectroscopy as well as ESI mass spectrometry. ESI MS measurements performed for the first time on a superacidic solution system unambiguously reveal the formation of the monoanionic, mononuclear W and Mo complexes formulated as [M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo). Multinuclear NMR spectroscopic studies at natural abundance and ¹³C and ¹⁵N enrichment clearly indicate the presence of one CO ligand, two equivalent NO ligands, and two types of nonequivalent SO₃F^? groups in a 2:1 ratio. The IR and Raman spectra reveal that the two equivalent NO ligands have a cis conformation, thus indicating a fac structure. Density functional calculations at the B3LYP level of theory predict that these anions have a singlet ground state (¹A′) with a C_s symmetry along with C–O and N–O vibrational frequencies that are in agreement with the experimental observations. Mulliken population analysis shows that the monovalent negative charge is dispersed on the bulky sphere, the surface of which is covered by all the negatively charged O and F atoms with charge densities much lower than SO₃F^?, suggesting that [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo) are weakly nucleophilic and poorly coordinating anions.