Surface chemistry studies of (CdSe)ZnS quantum dots at the air-water interface

Trioctylphosphine oxide- (TOPO-) capped (CdSe)ZnS quantum dots (QDs) were prepared through a stepwise synthesis. The surface chemistry behavior of the QDs at the air-water interface was carefully examined by various physical measurements. The surface pressure-area isotherm of the Langmuir film of the QDs gave an average diameter of 4.4 nm, which matched very well with the value determined by transmission electron microscopy (TEM) measurements if the thickness of the TOPO cap was counted. The stability of the Langmuir film of the QDs was tested by two different methods, compression/decompression cycling and kinetic measurements, both of which indicated that TOPO-capped (CdSe)ZnS QDs can form stable Langmuir films at the air-water interface. Epifluorescence microscopy revealed the two-dimensional aggregation of the QDs in Langmuir films during the early stage of the compression process. However, at high surface pressures, the Langmuir film of QDs was more homogeneous and was capable of being deposited on a hydrophobic quartz slide by the Langmuir-Blodgett (LB) film technique. Photoluminescence (PL) spectroscopy was utilized to characterize the LB films. The PL intensity of the LB film of QDs at the first emission maximum was found to increase linearly with increasing number of layers deposited onto the hydrophobic quartz slide, which implied a homogeneous deposition of the Langmuir film of QDs at surface pressures greater than 20 mN.m(-1).     

New features in the catalytic cycle of cytochrome P450 during the formation of compound I from compound 0

Density functional theory (DFT) is applied to the dark section of the catalytic cycle of the enzyme cytochrome P450, namely, the formation of the active species, Compound I (Cpd I), from the ferric-hydroperoxide species (Cpd 0) by a protonation-assisted mechanism. The chosen 96-atom model includes the key functionalities deduced from experiment: Asp(251), Thr(252), Glu(366), and the water channels that relay the protons. The DFT model calculations show that (a) Cpd I is not formed spontaneously from Cpd 0 by direct protonation, nor is the process very exothermic. The process is virtually thermoneutral and involves a significant barrier such that formation of Cpd I is not facile on this route. (b) Along the protonation pathway, there exists an intermediate, a protonated Cpd 0, which is a potent oxidant since it is a ferric complex of water oxide. Preliminary quantum mechanical/molecular mechanical calculations confirm that Cpd 0 and Cpd I are of similar energy for the chosen model and that protonated Cpd 0 may exist as an unstable intermediate. The paper also addresses the essential role of Thr(252) as a hydrogen-bond acceptor (in accord with mutation studies of the OH group to OMe).     

Synthesis and characterization of complexes of UO2(II) and Th(IV) of bis-schiff bases derived from furoylpyrazolone

Four new complexes of UO₂(II) and Th(IV) with bis-Schiff bases, derived from N,N'-bis[(l-phenyl-3-methyl-5-oxo-4-pyrazolinyl)-a-furylmethylidyne]-1,2-propylenediimine [1,2-BPMOPFP-H₂] and N,N'- bis[(l-phenyl-3-methyl-5-oxo-4-pyrazolinyl)-a-furylmethylidyne]-1,3-propylenediimine [1,3-BPMOPFP-H₂], were synthesized and characterized by elemental analysis, IR, UV, ¹HNMR spectroscopy, and molar conductivity. The general formula of the complexes was confirmed to be [UO₂(BPMOPFP)], [Th(BPMOPFP)(NO₃)]NO₃. A possible structure for the complexes have been proposed.     

头发锌含量测定的应用价值评价

以114例2－5岁儿童为对象，同时取其末梢血和头发，测定锌含量。以全血锌值为标准，评价头锌测定的应用价值。结果显示，头发锌测定的灵敏度可达86．1％，特异度为52．4％，符合率为73．7％。     

Palladium‐Catalyzed Three‐Component Coupling Reaction of Allyl Carboxylates,Norbornenes and Diboronates Involving Sequential Olefins Insertion and Borylation Reaction

An efficient Pd‐catalyzed three‐component coupling reaction of allyl carboxylates, norbornenes and diboronates is described, which allows efficient assembly of C(sp³)—C(sp³) and C(sp³)—B bonds in a single process. Moreover, this approach shows advantages of good chemo‐ and regioselectivity, as well as good substrates suitability.     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

Cu-Zn-Sn体系富Sn区液相限的研究

近些年来,无铅低熔点填料日渐引起人们的兴趣,且将得到广泛的应用。Cu-Zn-Sn合金正是无铅低熔点填料的一种基本合金。该体系相图虽有一些报道,但他们的研究只涉及富铜区(>50Wt％)的液相限和等温截面(500℃)。我们颇感兴趣的富Sn区的液相限,尚未见文献报道,因此测定该体系富Sn区的液相限是必要的。关于Cu-Zn-Sn体系的三个相关二元体系,已有文献报道,也较成熟。对于Cu-Zn体系,富Zn区600℃以下存在两个转熔反应,其转熔点分别为Q(～88Wt％Zn,598℃),W(97.5-98.5Wt％Zn,424℃);Cu-Sn体系富Sn区有一个转熔反应,其转熔点     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

新型2-氧代-1,2,4-三唑并[3,2-d][1,5]苯并氧氮杂类稠杂环的合成

将取代色满酮(1)与芳肼反应生成的腙与HNCO发生[3+2]环加成反应,加成产物(2)经氧化得到偕偶氮异氰酸酯(3).化合物3在HBF4的催化下发生环化-重排反应,得到新颖的三环系2-氧代-1,2,4-三唑并[3,2-d][1,5]苯并氧氮杂化合物5a～5g.     

Effect of ionic additives on the elution of sodium aryl sulfonates in supercritical fluid chromatography

Addition of a small amount of polar solvent (i.e., modifier) to CO2 in packed column supercritical fluid chromatography (SFC) has shown major improvements in both polar analyte solubility and interaction of the polar analyte with the stationary phase. Recently, the addition of an ionic component (i.e., additive) to the primary modifier by one of us has been shown to extend even further the application of SFC to polar analytes. In this work, the effect of various ionic additives on the elution of ionic compounds, such as sodium 4-dodecylbenzene sulfonate and sodium 4-octylbenene sulfonate, has been studied. The additives were lithium acetate, ammonium acetate, tetramethylammonium acetate, tetrabutylammonium acetate, and ammonium chloride dissolved in methanol. Three stationary phases with different degrees of deactivation were considered: conventional cyanopropyl, deltabond cyanopropyl, and bare silica. The effect of additive concentration and additive functionality on analyte retention was investigated. Sodium 4-dodecylbenzene sulfonate was successfully eluted using all the additives with good peak shape under isocratic/isobaric/isothermal conditions. Different additives, however, yielded different retention times and in some cases different peak shapes.