近红外光谱结合化学计量学评价胚胎发育潜能

使用近红外光谱分析方法测量培养后的胚胎培养液,结合偏最小二乘判别分析对胚胎发育潜能进行评价,鉴别具有妊娠能力与不具妊娠能力的胚胎。为了提高模型的判别能力,消除无信息变量对模型稳定性影响,分别采用基于蒙特卡罗的无信息变量消除法(MC-UVE)、竞争性自适应加权抽样法(CARS)与基于变量稳定性的竞争性自适应加权抽样法(SCARS),对光谱进行波长选择。结果表明,与采用全谱74%的正判率相比较,采用这3种波长选择方法,模型独立检验集的正判率分别提高至74.24%,77.12%与80.10%,建模使用变量数降至50以内。比较发现,SCARS的模型优化能力和稳定性均好于MC-UVE和CARS方法。采用近红外光谱结合化学计量学方法预测胚胎的发育潜能是可行的。     

近红外发光Ag2S-CdS 核壳结构水溶性量子点的合成及光学性质

本文以谷胱甘肽(GSH)作为表面活性剂,采用两步法,先生成Ag2S核,再生长CdS,得到了高质量的Ag2S-CdS核壳结构水溶性量子点。我们用XRD,TEM,HRTEM和EDS研究了产物的结构,形貌和组分,用紫外可见吸收光谱和荧光发射光谱研究了所得量子点的光学性质,同时考察了反应时间,GSH的量,Ag和S源前驱物的含量对量子点光学性质的影响。实验结果表明量子点稳定性好,荧光寿命长,可在710~718 nm近红外区域发光。在核生长过程中,Ag和S源的含量同时影响量子点的发光位置和强度,而GSH量和壳层生长中S源的量几乎只影响近红外发光强度,发光位置保持不变。不同的量子点光学性质可能来源于量子点中组分及表面缺陷的分布。     

The effect of ionic strength on the diffusion of 125I in Gaomiaozi bentonite

The diffusion of ¹²⁵I^? in compacted Gaomiaozi (GMZ) bentonite was investigated by capillary in-diffusion method. Apparent and effective diffusion coefficients and accessible porosity of iodide in GMZ bentonite were obtained, and the effect of ionic strength on diffusion parameters was studied. The apparent diffusion coefficients of iodide in compacted GMZ bentonite are in the range of 1.0–6.0 × 10^?10 m² s^?1 under the conditions of dry bulk density 1,500 kg m^?3 and temperature 298 K, and increase with increasing ionic strength. This effect was explained through the analysis of microscopic structure of compacted bentonite. The iodide can only diffuse in unbound interparticle pore solution of compacted bentonite. The apparent diffusion coefficient is a function of accessible porosity which is decided by the thickness of diffusion double layer, and the thickness is in turn controlled by ionic strength.     

A simple, rapid, and efficient oxidation of oximes to ketones and aldehydes with manganese dioxide catalyzed by kieselguhr under solvent-free conditions

A simple, rapid, and efficient oxidation of oximes to the corresponding ketones and aldehydes with manganese dioxide catalyzed by kieselguhr under solvent-free conditions at room temperature in the yields between 82 and 98 is described. It seems that kieselguhr in the present procedure can highly expedite the reaction rate. By comparing to other methods described previously, the main advantages of this oxidation are that the oxidations are more efficient, the reaction conditions are milder, the reaction times are shorter, and the work-up is easier. Furthermore, the amount of manganese dioxide used in this oxidation is largely decreased.     

The preparation and properties of bulk-heterojunction organic solar cells with indole-containing fulleropyrrolidine derivatives as acceptors

Two indole-containing fullerene derivatives, N-hydrogen-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (EHIHC60P), and N-(2-ethylhexylindolyl))-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (DEHIC60P) were synthesized by the typical Prato reaction. The absorption spectra, electrochemical properties of the two compounds were measured. Inverted solar cells were fabricated with the structure of ITO/ZnO/poly(3-hexylthiophene) (P3HT):fullerene derivatives/MoO₃/Ag. The highest power conversion efficiencies (PCEs) of 3.32% and 3.23% were obtained for P3HT/EHIHC60P and P3HT/DEHIC60P based solar cells at the composite ratio of 1:1 after the active layers were annealed at 150 °C under inert atmosphere, with a open-circuit voltage (V_oc) of 0.66 V and 0.74 V, respectively. For comparison, the device based on P3HT/PCBM at the same conditions showed the PCE of 3.28%, with a V_oc of 0.61 V. The influence on the photovoltaic property of the fullerene derivatives, which was induced by some subtle changes in the chemical structure was compared and discussed.     

Trigoxyphins O–T,six new heterodimers from Trigonostemon xyphophylloides

Phytochemical study of the twigs of Trigonostemon xyphophylloides led to the isolation of six new heterodimers, trigoxyphins O (1) and R–T (4–6) comprising of two different degraded diterpenoids, and trigoxyphins P (2) and Q (3) comprising a degraded diterpenoid and a phenylpropanoid, together with a known homodimer, neoboutomannin (7). The structures and relative configurations were elucidated on the basis of extensive spectroscopic analysis, including 1D and 2D NMR experiments. Compounds 1–6 were evaluated for their cytotoxicity against four human tumour cell lines by MTT assay.     

Effect of partial crosslinking on morphology and properties of the poly(β-hydroxybutyrate)/poly(d,l-lactic acid) blends

Poly(β-hydroxybutyrate) (PHB) is a bio-based and biodegradable aliphatic polyester, however its application is limited by some disadvantages such as high price, brittleness, poor processability and low melt-strength due to serious thermal degradation. Partial crosslinking initiated by dicumyl peroxide (DCP) was applied in this work to improve the performance of poly(β-hydroxybutyrate)/poly(d,l-lactic acid) (PHB/PDLLA) blends. The partial crosslinking of the blends and its effect on the properties, morphology, rheology and thermal behavior of the blends were investigated. The tensile strength and impact toughness of the PHB were increased by incorporation of the PDLLA, which were improved further after the partial crosslinking because of an increased compatibility between the PHB and the PDLLA phases. The rheological study revealed that the storage modulus (G′) and complex viscosity (η*) of the blends were increased after addition of the DCP. On the other hand, the crystallization of PHB in the blends was restricted to a certain extent by the formation of partially crosslinked network while its crystal form was not modified.     

Development of a rapid method for the simultaneous separation and determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol and its N- and O-glucuronides in human urine by liquid chromatography–tandem mass spectrometry

Determination of the tobacco-specific nitrosamine metabolite 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) and its N- and O-glucuronides (NNAL-N-Gluc and NNAL-O-Gluc) is important for toxicology analysis of tobacco smoke induced carcinogenicity and the understanding of detoxification mechanisms of the carcinogenic nitrosamine in humans. But previously reported indirect measurement methods involving enzymolysis and base treatment steps were tedious and time-consuming. In this work, a direct measurement method for simultaneous determination of urinary NNAL, NNAL-N-Gluc and NNAL-O-Gluc by liquid chromatography–tandem mass spectrometry (LC–MS/MS) in a single run was developed for the first time without the need to perform enzymatic or base hydrolysis. Urine samples were purified using dichloromethane and further extracted by solid-phase extraction. Then they were analyzed by LC–MS/MS operated in electrospray positive ionization mode. Chromatographic separation was achieved on a Phenomenex Kinetex PFP column within 6 min. The proposed method was validated and the results demonstrated that the method can produce satisfactory recoveries and reproducibility for the analytes. The applicability of this newly developed method was investigated for the simultaneous analysis of the three metabolites in smokers’ urine and the obtained results were comparable to those detected using the conventional enzymolysis method.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

Molecule-binding dependent assembly of split aptamer and γ-cyclodextrin: A sensitive excimer signaling approach for aptamer biosensors

A highly sensitive and selective fluorescence aptamer biosensors for the determination of adenosine triphosphate (ATP) was developed. Binding of a target with splitting aptamers labeled with pyrene molecules form stable pyrene dimer in the γ-cyclodextrin (γ-CD) cavity, yielding a strong excimer emission. We have found that inclusion of pyrene dimer in γ-cyclodextrin cavity not only exhibits additive increases in quantum yield and emission lifetime of the excimer, but also facilitates target-induced fusion of the splitting aptamers to form the aptamer/target complex. As proof-of-principle, the approach was applied to fluorescence detection of adenosine triphosphate. With an anti-ATP aptamer, the approach exhibits excimer fluorescence response toward ATP with a maximum signal-to-background ratio of 32.1 and remarkably low detection limit of 80 nM ATP in buffer solution. Moreover, due to the additive fluorescence lifetime of excimer induced by γ-cyclodextrin, time-resolved measurements could be conveniently used to detect as low as 0.5 μM ATP in blood serum quantitatively.