Binary mixtures based on polycaprolactone and cellulose derivatives

Pyrolytic process has a promising potential for the environmentally friendly upgrading of lignocellulosic and plastic waste. Thermogravimetry and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) were used to get information about the reactive decomposition of PCL in binary mixtures with microcrystalline cellulose (MC) or sisal fibres (SF). Preliminary thermogravimetric investigation showed that biomass is thermally degraded at lower temperatures than PCL and this process has a predominant influence on the thermal behaviour of the mixtures. Discrepancies between the experimental and predicted TG/DTG profiles were considered as a measurement of the extent of interactions occurring on co-pyrolysis. It was found that reactivity of PCL was slightly increased in PCL-SF binary mixtures. Evolution of acidic products from cellulose and hemicelluloses decomposition may promote PCL degradation in binary mixtures with SF. It seems that the co-pyrolysis process could have potential for the environmentally friendly transformation of biocomposites.     

A Novel Polyoxovanadium Cluster Shell: β‐As8V14O42

The hydrothermal reaction of VOSO₄, As₂O₅, piperazine and H₂O produces [H₂N(CH₂)₄NH₂]₄[β‐As₈V₁₄O₄₂(SO₄)]·2HSO₄ ( 1 ), which is the first arsenic‐vanadium cluster containing a spherical β‐As₈V₁₄O₄₂ shell. The structure of this compound was characterized by single crystal X‐ray diffraction, elemental analysis, TG, and IR spectrum. Crystal data for 1 : Orthorhombic, Cmcm, a = 15.369(1) Å, b = 16.404(1) Å, c = 25.772(1) Å, V = 6497.4(9) ų, Z = 4.     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol L^?1 guanidine hydrochloride (GuHCI) or 8.0 mol L^?1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol L^t-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disulfide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with reversed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

Density functional study of HO(H2O)n (n = 1–3) clusters

The hydrogen bonding complexes HO(H₂O)_n (n = 1–3) were completely investigated in the present study using DFT and MP2 methods at varied basis set levels from 6‐31++G(d,p) to 6‐311++G(2d,2p). For n = 1 two, for n = 2 two, and for n = 3 five reasonable geometries are considered. The optimized geometric parameters and interaction energies for various complexes at different levels are estimated. The infrared spectrum frequencies and IR intensities of the most stable structures are reported. Finally, thermochemistry studies are also carried out. The results indicate that the formation and the number of hydrogen bonding have played an important role in the structures and relative stabilities of different complexes. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

激光等离子体反应生成的AgP+n、AumP+n的结构分析

原子簇化合物的合成方法,由于条件限制,只有B、C、St等非金属元素与过渡金属袈基化合物等较为成熟．贵金属原子簇的合成则较困难．然而,应用激光等离子体反应,可使周期表内几乎所有元素都生成原子簇,为原子簇的生成与研究提供了一条新途径．该方法生成的原子簇在飞行时间质谱仪上可记录到一系列信号,某些信号呈现区域极大（或被称为‘匈数’吵］．郑兰芬等用纯化的红磷粉分别与金粉、银粉混合,在激光等离子作源飞行时间质谱仪上得到一系列谱图【2］：ig与P作用只得到单核xg与P形成的lgy：iE离子簇．谱图较简单,＊沪X最大可达叱叱…     

Solution redox chemistry of carbon nanotubes

UV/vis/NIR absorbance spectra were used to monitor electron transfer between small-molecule redox reagents and carbon nanotubes (CNTs). The oxidation of (6, 5)-enriched nanotubes in water with K(2)Ir(Cl)(6) reveals a valence electron density of 0.2-0.4 e(-)/100 carbon atoms and a reduction potential of approximately 800 mV versus NHE. The reduction potential of CNTs is found to increase with increasing band gap and to decrease with the introduction of an anionic dispersant. In light of this newly revealed redox chemistry of CNTs, we propose that the previously observed bleaching of the CNT absorbance spectrum at low pH is most likely a consequence of the oxidation of the nanotubes by oxygen. These results demonstrate facile oxidation and reduction of CNTs, provide a way to quantify the population of valence electrons, and point to possible applications of CNT in the catalysis of redox reactions.     

Density functional theory study of the mechanism of the proline-catalyzed intermolecular aldol reaction

Transition structures associated with the C-C bond-formation step of the proline-catalyzed intermolecular aldol reaction between acetone and isobutyraldehyde have been studies using density functional theory methods at the B3LYP/6-31G** computational level. A continuum model has been selected to represent solvent effects. For this step, which is the stereocontrolling and rate-determining step, four reactive channels corresponding to the syn and anti arrangement of the active methylene of the enamine relative to the carboxylic acid group of l-proline and the re and si attack modes to both faces of the aldehyde carbonyl group have been analyzed. The B3LYP/6-31G** energies are in good agreement with experiment, allowing us to explain the origin of the catalysis and stereoselectivity for these proline-catalyzed aldol reactions. Received: 2 April 2002 / Accepted: 18 July 2002 / Published online: 11 October 2002 Acknowledgements. This work was supported by research funds provided by the Ministerio de Educación y Cultura of the Spanish Government by DGICYT (project PB98–1429). All the calculations were performed on a Cray–Silicon Graphics Origin 2000 of the Servicio de Informática de la Universidad de Valencia. We are most indebted to this center for providing us with computer capabilities. Correspondence to: L. R. Domingo e-mail: domingo@utopia.uv.es     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.