Topological structure bifurcation of temperature field of deformable drop in Marangoni migration

The unsteady processes of the Marangoni migration of deformable liquid drops are simulated numerically in a wider range of Marangoni number (up to Ma = 500) in the present work. A steady terminal state can always be reached, and the scaled terminal velocity is a monotonic function decreasing with increasing Marangoni number, which is generally in agreement with corresponding experimental data. The topological structure of flow field in the steady terminal state does not change as the Marangoni number increases, while bifurcation of the topological structure of temperature field occurs twice at two corresponding critical Marangoni numbers. A third critical value of Marangoni number also exists, beyond which the coldest point jumps from the rear stagnation to inside the drop though the topological structure of the temperature field does not change. It is found that the inner and outer thermal boundary layers may exist along the interface both inside and outside the drop if Ma > 70. But the thickness decreases with increasing Marangoni number more slowly than the prediction of potential flow at large Marangoni and Reynolds numbers.     

对一类强非线性系统的分析

本文研究了一类强非线性系统,首先对系统在相平面上的全局结构进行定性分析,得到了系统参数的分叉值,然后研究了摄动方法在定性分析中的应用。     

Near field behavior of in-plane crack extension in nonlinear incompressible material

The nonlinear theory of finite elasticity is applied to obtain the in-plane displacement and stresses in the immediate vicinity of the crack tip. Incompressibility, homogeneity, elasticity and isotropy are assumed for the material while the resultant shear stress and shear strain are assumed to follow a nonlinear hardening/softening behavior. The system of governing differential equations becomes nonelliptical when the strains are sufficiently large.     

加注稀土元素铒改善轴承表面性能的研究

在Ｍｏ＾＋＋Ｎ＾＋注入模式的基础上，应用电子能谱、卢瑟福背散射谱、扫描电子显微镜和ＭＨＫ－５００型摩擦磨损试验机等研究了加注稀土元素铒正离子Ｅｒ＾＋对轴承表面摩擦学性能和耐蚀性能的影响。结果表明，在合理配置Ｍｏ＾＋、Ｎ＾＋、Ｅｒ＾＋之能量和剂量的情况下，加注Ｅｒ＾＋既能更好地改善轴承的表面性能，又能使重离子的强韧化效果提高２－４倍以上，表明ＭＯ＾＋＋Ｎ＾＋＋Ｅｒ＾＋注入模式是一种具有良好应用前景的     

利用显微拉曼光谱技术鉴别印文形成时间的应用研究

采用激光显微拉曼光谱技术,选择10种不同品牌和型号的印泥(油)盖印印文的历时性样本,利用印文拉曼光谱中的1089 cm~(-1)和1235 cm~(-1)处特征峰的相对面积值(I)分析纸张、温度、热老化因素对印文形成时间的影响,探讨盖印时间与峰面积相对值(I)的关系。结果表明,I值随时间呈现规律性变化,尤其在近期内盖印印文的变化规律明显,适用于印文形成时间的鉴别,是一种准确、无损的检验方法。     

Amide-Directed C−H Sodiation by a Sodium Hydride/Iodide Composite

A new protocol for amide-directed ortho and lateral C−H sodiation is enabled by sodium hydride (NaH) in the presence of either sodium iodide (NaI) or lithium iodide (LiI). The transient organosodium intermediates could be transformed into functionalized aromatic compounds.     

Ferromagnetic to Paramagnetic Transition in Spherical Spin Glass

Journal of Statistical Physics - We consider the spherical spin glass model defined by a combination of the pure 2-spin spherical Sherrington–Kirkpatrick Hamiltonian and the ferromagnetic...     

Palladium-catalyzed cycloaromatization polymerization of enediynes

Bergman cyclization has shown great promise in constructing conjugated polymers.However,the application of this reaction in polymer science is still limited due to the harsh reaction condition and ill-defined structure of the achieved polymers.To this end,the cycloaromatization polymerization of enediynes catalyzed by a series of transition metal catalysts is investigated in this work,by taking advantage of the coordination chemistry of the enediyne with the transition metal complexes.According to the nuclear magnetic resonance (NMR),Fourier transform infrared (FTIR),ultraviolet-visble (UV-Vis) spectroscopies and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis,the cycloaromatization polymerization of enediynes proceeds under milder conditions and in a more controlled manner in the presence of palladium(Ⅱ) complexes,giving structurally regulated conjugated polymers in high yields.     

基于B样条的TERS形貌成像背景扣除方法

在针尖增强拉曼光谱(TERS)形貌成像过程中,由于针尖与扫描台无法绝对平行、样品电子密度骤变处针尖快速升降以及扫描控制系统响应时间特性差等综合原因的影响,往往使形貌图中带有倾斜或边界面卷曲的成像背景。成像背景对样品形貌的识别和分析带来十分不利的影响,而背景扣除就是解决该问题的重要手段,也是形貌成像预处理的重要组成部分。背景扣除的原理一般是通过拟合背景的方法来扣除成像中的背景。传统的背景扣除方法是利用多项式拟合的方法对成像进行逐行的基线校正,但是该方法在处理形貌成像时常常会由于过拟合而造成样品形貌的失真,同时容易在图片上留下明显的线条纹理。针对传统方法的缺点,本文提出采用B样条曲面拟合方法,直接对样品形貌图进行曲面背景拟合,发挥B样条低阶光滑的优点,能够有效克服传统方法的缺陷。在实验中,同时利用传统方法和该方法对金单晶和合成金片的形貌图进行背景扣除,实验结果表明,两种方法都能够扣除样品形貌图中的成像背景,但与传统方法相比,所提出的方法不会造成样品形貌的失真,且不会留下线条纹理,获得了更加良好的背景扣除效果,为进一步分析样品形貌特征提供了更准确可靠的信息,是一种更加有效的TERS形貌成像背景扣除算法。     

pH对毛细管电泳分离多肽的影响

设计了一个针对高年级本科生的毛细管电泳分离实验,用以研究pH对生物小分子多肽分离的影响。5种多肽包括Bradykinin、[Hyp3]-bradykinin、Angiotensin I、Leucine Enkephalin和[Met5]-Enkaphalin,被用于毛细管电泳的分离实验。研究了毛细管电泳生物分析实验中最重要的2个因素即电渗流和样品吸附随pH的变化以及对于分离的影响。在pH=10的条件下,酸性多肽几乎没有吸附,少量的碱性多肽有吸附。在pH=6的条件下,碱性多肽具有非常强的吸附从而导致非常差的分离效果,在pH=2.3的条件下,5种多肽都能被很好地分离,由于多肽此时都带有正电荷因此几乎没有吸附。而在此pH,电渗流消失。对具有一定分析化学基础理论知识的学生而言,这是一个非常好的生物分析实验,有助于学生充分理解相关环境因素对仪器分析的重要影响。