A new method for quantitative determination of two uronic acids by CZE with direct UV detection

A new method using capillary zone electrophoresis was developed for the rapid quantification of two common uronic acids, galacturonic acid and glucuronic acid, based on utilization of an alkaline background electrolyte with reversed electroosmotic flow (EOF) within 16 min. The method relies on in‐capillary reaction and direct UV detection at the wavelength 270 nm. The optimum electrolyte solution was prepared of 130 mm sodium hydroxide, 36 mm disodium hydrogen phosphate dihydrate and 0.5 mm cetyltrimethylammonium bromide. EOF was reversed to detect uronic acids and to improve the separation of neutral sugars. The established method was validated and the results showed good linearity, high precision and satisfactory sensitivity. The newly developed method was successfully applied to analyze galacturonic acid and glucuronic acid content in Forsythia suspensa polysaccharides. The method is fast since only sample hydrolysis and dilution are required in the sample preparation. Copyright © 2010 John Wiley & Sons, Ltd.     

高效液相色谱-电化学检测法测定鼠脑微透析液中谷胱甘肽和半胱氨酸

采用高效液相色谱法,用电化学检测手段成功地测定了沙土鼠脑纹状体微透析液内的谷胱甘肽（ＧＳＨ）和半胱氨酸（Ｃｙｓ）。检测前用电化学自清洗方式能有效地提高玻璃碳电极的检测水平,使其具有较好的重现性和回收率。Ｃｙｓ和ＧＳＨ的回收率分别为９１．４％和８７．３％。电化学检测的工作电压为０．９Ｖ,用外标法定量。由微透析探针获取的纹状体透析液Ｃｙｓ和ＧＳＨ的浓度分别为６８．５９和６５．５４ｎｍｏｌ／Ｌ,验证了方法的实用性和可靠性。     

Electroreduction of α-glucose on CNT/graphite electrode modified by Zn and Zn–Fe alloy

Electroreduction of -glucose to form sorbitol on Zn/CNTs and Zn alloy/CNTs electrodes has been investigated in this paper. Carbon nanotubes (CNTs) used in this paper are grown directly on graphite disks by chemical vapor deposition. Zn and Zn alloy are electrodeposited on the activated CNTs/graphite electrode by pulse galvanostatic method. The micrographs of Zn/CNTs and Zn alloy/CNTs electrodes are characterized by scanning electron microscopy. The results show that the current efficiency of -glucose reduction on CNTs electrodes is much better than that on flat Zn electrodes. The order of the current efficiency on different electrodes is as follows: Zn/CNT (0.58) Zn–Fe/CNT (0.57)>Zn–Ni/CNT (0.43) Zn/graphite (0.42)>Zn (0.40). It indicates that CNTs have good potential application in electrosynthesis. Additionally, effects of some operating parameters, such as pH, temperature and -glucose concentration, on the current efficiency of -glucose reduction are also discussed.     

Multinuclear magnetic resonance spectroscopy studies of the structuration of the tunnels of sepiolite in the presence of intracrystalline pyridine molecules

Sepiolite, a naturally occurring magnesiosilicate nanoporous clay mineral with a tunnel structure, contains two types of water molecules in the structure: zeolitic water trapped inside the tunnels and structural water molecules which interact strongly with magnesium cations. The zeolitic water was removed by heating the sepiolite to 120 degrees C. The partially dehydrated sepiolite absorbed pyridine vapor to produce an intercalated material where the pyridine takes the place of the zeolitic water. 1H solid-state MAS NMR spectroscopy showed that there is isotopic H/D exchange between pyridine-d5 and the remaining structural water molecules of the sepiolite framework. The exchange takes place at room temperature over several days. Wide line solid state 2H NMR of the sequestered pyridine-d5 showed that two populations of pyridine molecules coexist in the material: one very mobile physisorbed population, which can be removed by heating at 90 degrees C, and a population due to pyridine trapped in the tunnels. Except for small in-plane librations, the trapped pyridine was shown to be held rigidly by the sepiolite. When the pyridine intercalated material is heated at 400 degrees C the structural water and some of the pyridine is lost. The remaining pyridine takes the place of the structural water to produce a new inorganic-organic nanohybrid material with the pyridine bound to the terminal Mg(II) in the structure. The pyridine in this material as well as the intercalated material was characterized by slow-spinning 15N and 13C CP/MAS NMR spectroscopy. The 15N NMR was shown to be a very sensitive probe to characterize the various types of pyridine. The data indicate that pyridine molecules in the inorganic-organic nanohybrid material are directly bound to magnesium cations exposed in the tunnels of sepiolite.     

Hierarchical porous silica materials with a trimodal pore system using surfactant templates

Porous silica exhibiting a hierarchically ordered trimodal pore system with a well-defined reverse opal microstructure and bimodal mesoporosity in the walls has been prepared by using polystyrene latex spheres, a novel block copolymer and an ionic liquid surfactant as templates. The resulting materials exhibit hierarchical order at three length scales (small mesopores: 2-3 nm; large mesopores: 11-12 nm; macropores: 360 nm).     

Modeling and electrokinetic evidences on the processes of the Al(III) sorption continuum in SiO2(s) suspension

Reactions of Al(III) at the interface between SiO2(s) and aqueous solution were characteristically and quantitatively studied using electrophoretic methods and applying a surface complexation/precipitation model (SCM/SPM). The surface and bulk properties of Al(III)/SiO2 suspensions were determined as functions of pH and initial Al(III) concentration. Simulated modeling results indicate that the SCM, accounting for the adsorption mechanism, predicts sorption data for low surface coverage only reasonably well. Al(III) hydrolysis and surface hydroxide precipitation must be invoked as the Al(III) concentration and/or pH progressively increase. Accordingly, the three processes in the Al(III) sorption continuum, from adsorption through hydrolysis to surface precipitation, could be identified by the divergence between the SCM/SPM predictions and the experimental data. SiO2(s) suspensions with low Al(III) concentrations (1 x 10(-4) and 1 x 10(-5) M) exhibit electrophoretic behavior similar to that of a pure SiO2(s) system. In Al(III)/SiO2 systems with high Al concentrations of 1 x 10(-3), 5 x 10(-3) and 1 x 10(-2) M, three charge reversals (CR) are observed, separately representing, in order of increasing pH, the point of zero charge (PZC) on the SiO2 substrate (CR1), the onset of the surface precipitation of Al hydroxide (CR2), and at a high pH, the PZC of the Al(OH)3 coating (CR3). Furthermore, in the 1 x 10(-3) M Al(III)/SiO2(s) system, CR2 is consistent with the modeling results of SCM/SPM and provides evidence that Al(III) forms a surface precipitate on SiO2(s) at pH above 4. SiO2(s) dissolution was slightly inhibited when Al(III) was adsorbed onto the surface of SiO2(s), as compared to the dissolution that occurs in a pure SiO2(s) suspension system. Al hydroxide surface precipitation dramatically reduced the dissolution of SiO2(s) because the Al hydroxide passive film inhibited the corrosion of the SiO2(s) surface by OH- ions.     

Electrochemical Determination of Ascorbic Acid at γ-MnO<Subscript>2</Subscript> Modified Carbon Black Microelectrodes

A carbon black microelectrode modified by -MnO₂ has been prepared. The electrocatalytical oxidation of ascorbic acid (AA) at this microelectrode was investigated. The 2nd-order linear scan voltammograms of AA are recorded from –0.5 to 0.5V (vs. SCE). The relationship between the oxidation peak current of AA and its concentration in the range of 1.0×10^–64.0×10^–3molL^–1 is linear. The detection limit (3) was found to be 6.0×10^–7molL^–1. Also, the determination of AA in samples is evaluated, and the results are satisfactory.     

Probing the Adhesion of Hepatocellular Carcinoma HepG2 and SK‐Hep‐1 Cells

Carcinoma cell differentiation stage is an important indicator of cell behavior. For example, cell mobility is much higher for poorly‐differentiated hepatocellular carcinoma SK‐Hep‐1 cells than for well‐differentiated HepG2 cells. In this study, we have cultured HepG2 and SK‐Hep‐1 cells on chemically patterned polydimethylsiloxane (PDMS) substrates to observe differences in the adhesion properties and cell structure that occur due to the patterns. Both cell lines showed a preference for the hydrophobic regions on the patterned PDMS surface with SK‐Hep‐1 cells achieving a higher density than HepG2 for the same cell‐count solutions. Further, SK‐Hep‐1 cells adopted the square or hexagonal shape of the surface patterns while HepG2 cells maintained their more rounded shape. AFM force measurement arrays were also performed on the cell surfaces to measure and map adhesion values between the tip and cell surface membrane. These results demonstrate that, in addition to cell shape and size, adhesion expression in hepatocellular carcinoma cells is differentiation stage dependent. Further, the ability of the SK‐Hep‐1 cells to adopt the shape of the substrate pattern indicates they are more structurally labile, which may contribute to their higher mobility.     

Preparation and Characterization of Ultrafine Rare Earth Molybdenum Complex Oxide Particles

Ultrafine rare earth molybdenum (La–Mo and Ce–Mo) complex oxide particles have been synthesized by the sol–gel process using citric acid as complexing agent. The influence of preparation conditions such as thermal treatment temperature (T), molar ratio of citric acid to metallic ions (L/M), and pH value of the starting solution on the oxide particle size has been studied. The formation of La₂Mo₂O₉and Ce₂Mo₃O₁₂has been investigated using XRD, DTA–TG, FT-IR, TEM, and BET surface area measurements. It is shown that the morphology and structure of the oxide particles are significantly dependent on the preparation conditions. The influence of different preparation methods on the particle size of La–Mo and Ce–Mo oxides is also discussed.