微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。     

Generalization of Einstein relation for doped organic semiconductors

Under the assumption of Gaussian energy distributions of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO), analytical expressions of generalized Einstein relation for electron and hole transport in doped organic semiconductor thin films are developed. Numerical calculations show that, although traditional Einstein relation still holds for low carrier concentrations, that is, the diffusion-coefficient-to-mobility ratio in units of k_BT/q, with k_B the Boltzmann’s constant, T the temperature and q the elementary charge, equals 1. But when the electron (hole) concentration is high, the diffusion-coefficient-to-mobility ratio for electrons (holes) changes strongly with the electron (hole) concentration, the doping level, the mean energy of LUMOs (HOMOs) of the dopant E_Ld (E_Hd) and the host E_L (E_H), as well as their variances. Dopants with E_Ld<E_L (E_Hd>E_H) affect the diffusion-coefficient-to-mobility ratio mainly in the range of low and middle carrier concentrations, while those with E_Ld>E_L (E_Hd<E_H) have significant effect only in the range of high carrier concentrations. It was found that there can be a maximum in the dependence of the diffusion-coefficient-to-mobility ratio on the quasi-Fermi energy or carrier concentration exist, for appropriate values of the doping level, the mean energy and variance of LUMO or HOMO states of the dopant. PACS 71.20.Rv; 72.90.+y; 73.50.-h     

3004铝合金“反常”锯齿屈服现象的研究

在应变速率为5.56×10^-5s^-1—5.56×10^-3s^-1的范围内，在不同温度下(从223K至773K)，对3004铝合金进行系列拉伸试验，探索其锯齿屈服规律；通过激活能的计算、内耗研究、微观组织观察和能谱分析，探讨锯齿屈服的机理与物理本质.结果表明，3004铝合金在形变过程中会出现动态应变时效现象；发现了一种“反常”的锯齿屈服现象：在出现锯齿屈服的温区内，存在锯齿屈服临界应变量转变温度T_t， 关键词： 动态应变时效 锯齿屈服 铝合金 内耗     

含有五边形—七边形缺陷的单壁纳米碳管的输运性质研究

运用第一性原理的密度泛函理论结合非平衡格林函数研究了含有五边形—七边形拓扑缺陷的纳米碳管异质结的输运性质.结果发现：拓扑缺陷对碳管的输运性质有很大影响；另外，不同类型的碳管形成的异质结的输运性质也有明显的差异. 关键词： 纳米碳管 输运性质 异质结 透射系数     

Spectroscopic and Structural Study of the 1：2 Aluminium（Ⅲ） Complex of Quercetin

Complex formation between aluminium and quercetin（Q） in methanol was investigated by means of 27^Al solid-state, 13^C and 1^H NMR and MS（ESI）, UV and IR spectra. Formation of the 1：2 complex was favored in methanol relative to all other solvent and the predominant species observed of Al（Ⅲ） has a 1：2 stoichiometry. The fine structure of 1：2 aluminum complex of quercetin was that the aluminum central atom chelated with two quereetin molecules and two methoxyl groups between two five membered rings, its coordination is six, the chelated site was 3-hydroxy-4-carbonyl.     

一类多线性积分算子的端点有界性

本文对一类相关于非卷积型算子的多线性算子,证明了其在端点情形上的有界性,该算子包括Littlewood-Paley算子和Marcinkiewicz算子．     

高掺杂Ga对ZnSe:Ga,Cu晶体中深中心发射的影响

本文研究了高掺杂Ga对ZnSe:Ga,Cu晶体中深中心光致发光谱带的影响。首次在高掺杂ZnSe:Ga,Cu中观察到了Cu-G带峰值位置随Ga浓度增大向长波方向移动的现象,并把它归因于高浓度的Ga和Cu相互作用,产生了谱峰为5580Å的新发射带,其半高宽(FWHM)大于Cu-G谱带的半高宽。此外还得到,随着Cu浓度增加,Cu-G带与Cu-R带强度之比减小。文中指出,Ga浓度较低时,ZnSe:Ga,Cu晶体与ZnSe:Cu晶体有相同的Cu深中心发射规律,即随着Cu浓度增大,Cu-G带与Cu-R带的强度比增大,由Cu-R发射带占优势逐渐过渡到Cu-G发射带占优势。     

荧光光谱法研究蛋白质构象的电磁-温度协同效应

长期以来电磁生物效应受到人们普遍关注，近年来从各个角度进行了相关研究。电磁－温度协同效应是当前的热点。本研究通过电磁场及温度协同对蛋白质影响的研究，发现蛋白质在电磁场作用下的不可逆变性，而且这种变性也遵循Arrhenius规律，并进一步得出电磁－温度协同作用的蛋白质变性模型。本文从分子反应动力学的角度解释了电磁－温度协同效应，并对非热效应作了一定的探讨。     

双齿配体—1,2—C_6H_4SX(X=O,S)的钴化合物~1H NMR研究

以~1H NMR谱学和磁化率对一些含邻苯二硫酚或巯基苯酚配体的钴化合物的磁性作了研究,并讨论了它们的电子结构。     

ASYMPTOTIC BEHAVIOR OF SOLUTIONS OF NONLINEAR NEUTRAL DIFFERENTIAL EQUATION

The boundedness of the every solution and the asymptotic behavior of all solutions of the nonlinear neutral delay differential equation [x(t) - P(t)x(t - t)]' Q1 (t)f(x{t-σ1))-Q2(t)f(x(t -σ2))=0,t≥t0 are investigated, whereτ,σ1,σ2∈(0,∞), P∈C([t0,∞),R), and Q1,Q2∈C([t0,∞),R), f∈C(R,R). The sufficient conditions obtained improve the existing results in the literatures.