Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.     

The ordinary quiver of a weight three block of the symmetric group is bipartite

Suppose F is a field of characteristic p?5, and that B is a p-block of the symmetric group Sn of defect 3. We prove that the Ext¹-quiver of B is bipartite, with the bipartition being described in a simple way using the leg-lengths of p-hooks of partitions.     

高压下氢化锂晶体中的离子间力与结合能公式的原子分子设计

本文提出一种利用材料Hugoniot数据研究高压下离子晶体中微观离子状态及其离子间排斥作用势的新方法。对氢化锂晶体进行研究时,我们得到Li~+和H~-离子之间排斥作用势函数,结果表明文献〔1〕中提出的离子压缩效应具有客观性。     

激光二极管侧面抽运Nd:YAG锁模激光器的研究

利用谐振腔的稳定条件对激光二极管侧面抽运的Nd：YAG锁模直腔的稳区特性和谐振腔内的光斑分布进行了分析。根据对腔参量的分析，选取合适的腔参量设计了一个简单的侧面抽运直腔，该谐振腔腔形简单，没有像散，振荡光模式好，有利于激光器的锁模运转。实验中采用国内自行研制的半导体可饱和吸收镜，实现了激光二极管侧面抽运半导体可饱和吸收镜锁模Nd：YAG激光器的连续锁模运转，平均输出功率为2W，锁模脉冲宽度为10ps，重复频率为100MHz。结合实验结果进一步讨论了半导体可饱和吸收镜的一些参量如饱和恢复时间、调制深度等对实现稳定连续锁模的影响。     

New Synthetic Method for Industrial Manufacture of Glutaric Dialdehyde

A new synthetic method for the manufacture of glutaric dialdehyde is investigated. Glutaric dialdehyde was prepared by the addition-hydrolysis reaction of benzimidazolium salt with saturated dihalide as the di-Grignard reagent. The yield of glutaric dialdehyde by this method can reach 73%. Both infrared spectra and melting point of the compound were consistent with those reported earlier. Translated from Journal of Northwest University (Natural Science Edition), 2005, 35(2) (in Chinese)     

等厚双层涂层材料受集中力作用的平面问题理论解

界面应力的正确评价是分析薄膜涂层材料力学特性的难题之一。利用镜像点法和Dirichlet等值性原理，本文推导了等厚双层薄膜涂层材料受表面集中力作用的平面问题理论解。该显式理论解是以固定在各镜像点上的局部坐标系下的Goursat应力函数的形式给出的。对应于高阶镜像点的应力函数，可通过递推的方法，从对应于低阶镜像点的应力函数求得，而且也易于计算机编程。随着镜像点阶数的增大，它与界面的距离也越来越大，因而相对应的应力函数对界面应力的影响越来越小。最后的算例表明，只需考虑前面有限个镜像点，便可获得足够精度的解。该理论解可作为格林函数，以求解复杂问题的理论解，也可用作边界元法的基本解，提高数值计算的精度和效率。     

含k-次增生算子的Ishikawa迭代的收敛性问题

主要研究了非线性方程x Tx=f的Ishikawa迭代解．其中T为k-次增生的或增生的，并在一致光滑和任意的实Banach空间分别研究了上述方程的带误差的Ishikawa迭代解，从而推广了已知的一些结果。