Deaggregation of long chain alkyl β-naphthoic acid ester with β-CD and α-CD: A mimic way to remove excessive fat from fatty liver

The deaggregating ability of β-CD and α-CD against the aggregated n-hexadecyl β-naphthoate (A16) and n-dodecyl β-naphthoate (A12) depended not only on the aggregating tendency of A16 and A12 but also on the initial concentration of the aggregated A16 or A12. The inclusive ability of β-CD with the substrates is greater than that of α-CD under hydrophobic lipophilie interaction.     

材料科学中的点击化学

近年来,点击(click)化学反应以其高产率、高选择性以及对各种官能团和反应条件优异的耐受性成为材料科学家们手中有力的研究工具.本文综述了点击化学的概念、特点、反应机理及应用.重点介绍了点击化学反应在聚合物、表面修饰、纳米材料方面的研究进展,并分析了点击化学目前存在的不足及今后发展趋势.     

Direct Electrochemistry of Hemoglobin on Single‐Walled Carbon Nanotubes Modified Carbon Ionic Liquid Electrode and Its Electrocatalysis

In this article we report on the fabrication of a carbon ionic liquid electrode (CILE) by using a room temperature ionic liquid of 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) as binder. It was further modified by single‐walled carbon nanotubes (SWCNTs) to get a SWCNTs modified CILE denoted as SWCNTs/CILE. The redox protein of hemoglobin (Hb) was further immobilized on the surface of SWCNTs/CILE with the help of Nafion film. UV‐vis and FT‐IR spectra indicated that the immobilized Hb retained its native conformation in the composite film. The direct electrochemistry of Hb on the SWCNTs/CILE was carefully studied in pH 7.0 phosphate buffer solution (PBS). Cyclic voltammetric results indicated that a pair of well‐defined and quasireversible voltammetric peaks of Hb heme Fe(III)/Fe(II) was obtained with the formal potential (E°') at ?0.306 V (vs. SCE). The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n) and the apparent heterogeneous electron transfer rate constant (k_s) were calculated as 0.34, 0.989 and 0.538 s^?1, respectively. The fabricated Hb modified electrode showed good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) in the concentration range from 20.0 to 150.0 mmol/L with the detection limit of 10.0 mmol/L (3σ).     

Supramolecular Assembly of β‐Cyclodextrin‐Capped Gold Nanoparticles on Ferrocene‐Functionalized ITO Surface for Enhanced Voltammetric Analysis of Ascorbic Acid

A supramolecular recognition functionalized electrode (βCD‐nanoAu/Fc‐ITO) which exhibits redox‐activity was prepared through supramolecular assembly of β‐cyclodextrin (βCD) capped gold nanoparticles (βCD‐nanoAu) on the ITO previously coated with a monolayer of ferrocene residues (Fc‐ITO). The immobilization of βCD‐nanoAu on Fc‐ITO was confirmed by atomic force microscopy (AFM), and the supramolecular nature of the immobilization approach was also confirmed by cyclic voltammetry. On the other hand, the electrocatalytic activity of βCD‐nanoAu/Fc‐ITO electrode was also studied. The electrocatalytic activity toward ascorbic acid (AA) was enhanced compared with that at the Fc‐ITO electrode, and a linear relationship existed between the anodic peak and the concentration of AA in the range of 5.3×10^?5 to 3.0×10^?3 M with a detection limit (S/N=3) of 4.1×10^?6 M.     

Spatially resolved vibrational energy transfer in molecular monolayers

We have shown that it is possible to input heat to one location of a molecule and simultaneously measure its arrival in real time at two other locations, using an ultrafast flash-thermal conductance technique. A femtosecond laser pulse heats an Au layer to approximately 800 degrees C, while vibrational sum-frequency generation spectroscopy (SFG) monitors heat flow into self-assembled monolayers (SAMs) of organic thiolates. Heat flow into the SAM creates thermally induced disorder, which decreases the coherent SFG signal from the CH-stretching transitions. Recent improvements in the technique are described, including the use of nonresonant background-suppressed SFG. The improved apparatus was characterized using alkanethiolate and benzenethiolate SAMs. In the asymmetric 2-methyl benzenethiolate SAM, SFG can simultaneously monitor CH-stretching transitions of both phenyl and methyl groups. The phenyl response to flash-heating occurs at least as fast as the 1 ps time for the Au surface to heat. The methyl response has a faster portion similar to the phenyl response and a slower portion characterized by an 8 ps time constant. The faster portions are attributed to disordering of the methyl-substituted phenyl rings due to thermal excitation of the Au-S adbonds. The slower portion, seen only in the methyl SFG signal, is attributed to heat flow from the metal surface into the phenyl rings and then to the methyl groups.     

Determination of trace amount of oxalic acid with zirconium(IV)-(DBS-arsenazo) by spectrophotometry

A novel method is proposed for the determination of trace amount of oxalic acid in the present article. In 1.0M hydrochloric acid medium, oxalic acid can react with the zirconium(IV) in Zr(IV)-(DBS-arsenazo) complex and replaces the DBS-arsenazo to produce a hyperchromic effect at 520 nm. The hyperchromic degree is proportional to the concentration of the oxalic acid added over a defined range. Based on this property, a new method for the spectrophotometric determination of trace oxalic acid was developed. Beer's law is held over the concentration range of 9.0 x 10(-6) to 5.0 x 10(-4)M for oxalic acid with a correlation coefficient of 0.9995. The apparent molar absorptivity of the method is epsilon520 nm = 1.16 x 10(3)L mol(-1)cm(-1) and the detection limit for oxalic acid is 0.815 microg/mL. The developed method was directly applied to the determination of oxalic acid in tomato samples with satisfactory results.     

Magnetic control of bioelectrocatalytic processes based on assembled iron oxide particles

A facile magnetic control system was designed in bioelectrocatalytic process based on functionalized iron oxide particles. The iron oxide particles were modified with glucose oxidase, and ferrocene dicarboxylic acid was used as electron transfer mediator. Functionalized iron oxide particles can assemble along the direction of applied magnetic field, and the directional dependence of the assembled iron oxide particles can be utilized for device purposes. We report here how such functionalized magnetic particles are used to modulate the bioelectrocatalytic signal by changing the orientation of the applied magnetic field.     

Stereoselective Chiral Molecular Carbon Imides Featuring 12-Fold [5]helicenes Around Four Cores**

Despite the great progress in research on molecular carbons containing multiple helicenes around one core, realizing the stereoselectivity of carbons containing multiple helicenes around more cores is still a great challenge. Herein, molecular carbon C₂₀₄ featuring 12-fold [5]helicenes around four cores was successfully constructed by using nine perylene diimide (PDI) units, and exhibits good solubility and stability. Despite 256 possible stereoisomers caused by the 12-fold [5]helicenes, we only obtained one pair of enantiomers with D₃ symmetry. There are four possible pairs of enantiomers with D₃ symmetry, namely 7A, 7B, 7C and 7D. Theoretical and experimental results verify that the obtained structure belongs to 7C, which has the lowest energy. The enantiomers can also be separated by chiral HPLC. These results suggest that choosing PDIs as building blocks can not only improve the solubility and stability but also realize the stereoselectivity and chirality of molecular carbons.     

Ce改性碳纳米管负载过渡金属磷化物用于电化学水分解

氢能是未来替代化石燃料的理想选择,可以通过电解水的半反应之一析氢反应制得,但其缓慢的反应动力学将会耗费大量的电池电压。因此,通过开发催化剂来降低电解槽的电压是解决这一问题的关键途径。本文经过简便的静电纺丝及碳化工艺得到Ce改性的碳纤维作为载体(Ce-CNFs),接着通过水热法及高温磷化法负载活性组分得到Co_x-Mo_y-P@Ce-CNFs,分别对催化材料的析氢反应(HER)和析氧反应(OER)电催化活性进行了研究。结果表明,在1mol/L KOH电解液中,仅需要160mV和323mV的过电位就能达到10mA/cm²的电流密度。将Co_x-Mo_y-P@Ce-CNFs作为阴极和阳极材料组装为整体水电解槽,在电流密度为10mA/cm²时,电解槽的电池电压为1.65V,在电化学耐久性测试中能够稳定保持8h。     

Olefin-Linked Covalent Organic Frameworks with Electronegative Channels as Cationic Highways for Sustainable Lithium Metal Battery Anodes

Despite the enormous interest in Li metal as an ideal anode material, the uncontrollable Li dendrite growth and unstable solid electrolyte interphase have plagued its practical application. These limitations can be attributed to the sluggish and uneven Li⁺ migration towards Li metal surface. Here, we report olefin-linked covalent organic frameworks (COFs) with electronegative channels for facilitating selective Li⁺ transport. The triazine rings and fluorinated groups of the COFs are introduced as electron-rich sites capable of enhancing salt dissociation and guiding uniform Li⁺ flux within the channels, resulting in a high Li⁺ transference number (0.85) and high ionic conductivity (1.78 mS cm⁻¹). The COFs are mixed with a polymeric binder to form mixed matrix membranes. These membranes enable reliable Li plating/stripping cyclability over 700 h in Li/Li symmetric cells and stable capacity retention in Li/LiFePO₄ cells, demonstrating its potential as a viable cationic highway for accelerating Li⁺ conduction.