新型药物辅料2-羟丙基-β-环糊精的色谱分离纯化

利用薄层色谱方法对碱浓度为1.5%、β-环糊精∶环氧丙烷(摩尔比)=1∶21的条件下生成的2-羟丙基-β-环糊精进行了定性分析,并通过对展开剂的选择和优化,得到了3种能有效分离不同取代度2-羟丙基-β-环糊精的展开剂体系,分别为正丙醇-水-浓氨水(6∶3∶1,V/V),异丙醇-水-浓氨水(6∶4∶0.5,V/V)和乙醇-水-浓氨水(6∶3∶0.8,V/V)。通过以乙醇体系为洗脱剂的硅胶柱色谱对其进行分离纯化,得到了两种不同取代的2-羟丙基-β-环糊精。经过ESI-MS谱图分析,确定分离后产品分别为单取代和双取代2-羟丙基-β-环糊精。     

偶氮染料——苏丹红

苏丹红是人工合成的一种工业染料,由于其潜在的毒性,不能作为食品添加剂使用。本文简要介绍了苏丹红的分类及结构、苏丹红一号的合成方法、苏丹红在人体内的代谢及毒性、苏丹红的检测分析。     

Affinity foam fractionation of Trichoderma cellulase

Cellulase could not be selectively collected from fermentation broth by simple foam fractionation, because of the presence of other more surface-active compounds. A new approach of affinity foam fractionation was investigated for improvement. A hardwood hydrolysate (containing cellulose oligomers, substrates to cellulase) and two substrate analogs, i.e., carboxymethyl cellulose (CMC) and xylan hydrolysate, were added before the foaming process. The substrates and substrate analogs were indeed found to bind the cellulase selectively and form more hydrophobic complexes that partition more readily onto bubble surfaces. In this study, the effects of the type and concentration of substrate/analog as well as the presence of cells at different growth stages were examined. The foam fractionation properties evaluated included foaming speed, foam stability, foamate volume, and enrichment of filter paper unit (FPU) and individual cellulase components (i.e., endoglucanases, exoglucanases, and β-glucosidases). Depending on the broth and substrate/analog employed, the foamate FPU could be more than fourfold higher than the starting broth FPU. Addition of substrate/analog also deterred the enrichment of other extracellular proteins, resulting in the desired cellulase purification in the foamate. The value of E/P (enzyme activity-FPU/g/L of proteins) in the foamate reached as high as 18, from a lactose-based fermentation broth with original E/P of 5.6. Among cellulase components, exoglucanases were enriched the most and β-glucosidases the least. The study with CMC of different molecular weights (MW) and degrees of substitution (DS) indicated that the CMC with low DS and high MW performed better in cellulase foam fractionation.     

An ionothermal synthetic approach to porous polyoxometalate-based metal-organic frameworks

Pretty porous POMs: Ionothermal synthesis was applied to prepare porous POM-based open frameworks. The structural integrity remains unchanged until 300?°C; most importantly, the bulky tetrabutylammonium cations within their nanosized channels can be replaced by transition-metal ions through a cation-exchange process, and subsequent gas adsorption measurements confirm their permanent porosity.     

The use of ethylene glycol solution as the running buffer for highly efficient microchip-based electrophoresis in unmodified cyclic olefin copolymer microchips

An ethylene glycol solution was used as the electrophoretic running buffer in unmodified cyclic olefin copolymer (COC) microchips to minimize the interactions between the analytes and the hydrophobic walls of the plastic microchannels, enhance the resolution of the analytes and eliminate the uncontrollable dispersion caused by uneven liquid levels and non-uniform surfaces of the separation channels. Five amino acids that were labeled with fluorescein isothiocyanate (FITC) were used as model analytes to examine the separation efficiency. The effects of ethylene glycol concentration, pH and sodium tetraborate concentration were systematically investigated. The five FITC-labeled amino acids were effectively resolved using a COC microchip with an effective length of 2.5 cm under optimum conditions, which included using a running buffer of 20 mmol/L sodium tetraborate in ethylene glycol:water (80:20, v/v), pH 6.7. A theoretical plate number of 4.8 × 10(5)/m was obtained for aspartic acid. The system exhibited good repeatability, and the relative standard deviations (n=5) of the peak areas and migration times were no more than 3.4% and 0.7%, respectively. Furthermore, the system was successfully applied to elucidate these five amino acids in human saliva.     

3D-structured carbon-coated MnO/graphene nanocomposites with exceptional electrochemical performance for Li-ion battery anodes

MnO has a high theoretical capacity, moderate discharge plateau, and low polarization when it is used as the anode material in lithium battery. However, the issues that limit its application are its poor conductivity and large volume changes, which can easily result in the collapse of electrode structure during long-term cycling. In the present work, a carbon-coated MnO/graphene 3D-network anode material is synthesized by an electrostatic adsorption of dispersed precipitates precipitation method. The MnO nanoparticles coated by carbon are uniformly distributed on the surface of graphene nanosheets and form a 3D sandwich-like nanostructure. A carbon layer is coated on the surface of MnO nanoparticles, which slows down the volume expansion in the process of lithium intercalation. The graphene nanosheets are cross-linked through carbons in this 3D nanostructure, which provides mechanical support and effective electron conduction pathways during the charge-discharge. The electrochemical tests indicate that the prepared 3D carbon-coated MnO/graphene electrode exhibits an excellent rate capacity of 1247.3 and 713.2 mAh g^?1 at 100 and 1000 mA g^?1, respectively. The capacity is 792.2 mAh g^?1 after long cycle at a current density of 1000 mA g^?1. The specific capacity is higher than that of MnO-based composite lithium anode materials currently reported. The superior rate and cycling performances are attributed to the unique 3D-network structure, which provides an effectively conductive network, buffers volume expansion, and prevents falling and aggregation of MnO in the charge and discharge process of the electrode materials. The 3D-structured carbon-coated MnO/graphene anode material will have an excellent application prospect.

Open image in new window

Graphical abstract Cyclic performance at 1 A g^?1 and SEM images (inset) of the 3D-structured carbon-coated MnO/graphene nanocomposite.

     

Anthraquinones from the Aerial Parts of Rubia cordifolia with Their NO Inhibitory and Antibacterial Activities

The present study aimed to identify the composition of the aerial parts of Rubia cordifolia L. A chemical investigation on the EtOAc extracts from the aerial parts of Rubia cordifolia resulted in the isolation of four new anthraquinones, namely Cordifoquinone A–D (1–4), along with 16 known anthraquinones. Their structures were elucidated on the basis of NMR and HR-ESIMS data. All isolates were assessed for their inhibitory effects on NO production in LPS-stimulated RAW 264.7 macrophage cells. Compounds 1, 3 and 10 exhibited significant inhibitory activities with IC₅₀ values of 14.05, 23.48 and 29.23 μmol·L⁻¹, respectively. Their antibacterial activities of four bacteria, Escherichia coli (ATCC 25922), Staphylococcus aureus subsp. aureus (ATCC 29213), Salmonella enterica subsp. enterica (ATCC 14028) and Pseudomonas aeruginosa (ATCC 27853), were also evaluated. Our results indicated that the antibacterial activity of these compounds is inactive.     

Dual-axes differential confocal microscopy with high axial resolution and long working distance

We discover that the slight transverse offset of a point detector results in a shift of the axial intensity response curve in a dual-axes confocal microscopy (DCM). Based on this, we propose a new dual-axes differential confocal microscopy (DDCM) with high axial resolution and long working distance, in which two point detectors are placed symmetrically about the collection axis. And a signal is obtained through the differential subtraction of two signals received simultaneously by the two point detectors. Theoretical analyses and preliminary experiments indicate that DDCM is feasible and suitable for the high precision tracing measurement of microstructures and surface contours.     

无源RC积分器在多脉冲信号测量中的问题分析

由微分测量探头和积分器构成的微分积分测量系统广泛应用于脉冲电压和电流测量。依据无源RC积分器的等效电路,分析了在多脉冲信号测量中,无源RC积分器在实现微分信号的积分还原时,可以引起信号的平顶降和信号基线偏离,给出了平顶降和基线偏离与信号脉冲宽度和积分常数的定量关系,计算了在不同积分器参数和脉冲信号参数时的平顶降和基线偏离结果,并且与PSpice电路模拟结果进行了比较,两种结果一致。按照此定量关系,可以根据脉冲信号特点和测量要求,准确确定积分器参数。