Corrosion inhibition of ammonium molybdate for AA6061 alloy in NaCl solution and its synergistic effect with calcium gluconate

The corrosion inhibition of ammonium heltamolybdate (AH) and calcium gluconate (CG) for AA6061 alloy in 3% NaCl solution was investigated by the electrochemical measurements. It indicates that AH inhibits the corrosion of AA6061 alloy and acts as an anodic inhibitor. Maximum inhibition efficiency reaches 74.3% at the concentration of 1 × 10^?4 mol.l^?1 AH. The results of the electrochemical studies reveal AH is physically adsorbed on the AA6061 alloy surface and the adsorption follows Langmuir isotherm. The combination of AH and CG enhances the inhibition efficiency to 95.9%. The enhanced inhibition is attributed to the promotion of AH adsorption by CG. The mixture of AH and CG is a mixed‐type inhibitor and renders the corrosion potential to more positive values. Copyright © 2011 John Wiley & Sons, Ltd.     

Solutions of the Schr?dinger equation in the tridiagonal representation with the noncentral electric dipole plus a novel angle-dependent component

A noncentral ring-shaped potential is proposed in which the noncentral electric dipole and a novel angle-dependent component are included, the radial part is selected as the Coulomb potential or the harmonic oscillator potential. The exact solution of the Schr?dinger equation with this potential is investigated by working in a complete square integrable basis that supports a tridiagonal matrix representation of the wave operator. The resulting three-term recursion relation for the expansion coefficients of the wavefunctions (both angular and radial) are presented. The angular/radial wavefunction is written in terms of the Jacobi/Laguerre polynomials. The discrete spectrum of the bound states is obtained by diagonalization of the radial recursion relation.     

Organophosphine/phosphite‐stabilized silver(I) complexes bearing N‐acetylbenzamide ligand: synthesis,characterization and potential application in metal organic chemical vapor deposition

New N‐silver(I) acetylbenzamide complexes of type L_n?AgNC₉H₈O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) were prepared. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C{H} NMR, ³¹P{H} NMR and IR spectroscopy, respectively. The molecular structure of 2b has been determined by X‐ray single‐crystal analysis in which the silver atom is in a distorted tetrahedral geometry and crystallizes as cis–trans. New N‐silver(I) acetylbenzamide complexes have a four‐membered ring, which could influence their chemical and physical properties and modulate volatility. Metal organic chemical vapor deposition experiments were carried out successfully at 400°C and 450°C using 2e as precursor for the deposition of silver films, respectively. The high‐purity silver film obtained at 400°C is dense and homogeneous. Copyright © 2012 John Wiley & Sons, Ltd.     

Copper‐catalyzed Clauson–Kass pyrroles synthesis in aqueous media

An efficient and convenient copper‐catalyzed Clauson–Kass reaction of 2,5‐dimethoxytetrahydrofuran with amines in aqueous media has been developed, providing a wide range of N‐substituted pyrroles in good yields. It is noteworthy that the Clauson–Kass reaction of 2,5‐dimethoxytetrahydrofuran with p‐phenylenediamine or m‐phenylenediamine proceeds smoothly to afford the corresponding monopyrroles and bispyrroles with high selectivity in impressive yields. A plausible mechanism for the formation of N‐substituted pyrroles has been proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of phenol‐based biaryl proton conducting polymers

Biaryl hydroxy polymers with orthogonal disposition of proton transporting ? OH moieties have been synthesized via conventional free radical polymerization. The polymers are characterized for their thermal stability and proton conductivity, and the results are compared with the corresponding styrenic hydroxy polymers. The orthogonal disposition of ? OH moieties in biaryl polymers does result in lower E_a for proton transport. However, the lower E_a values in biaryl polymers did not translate into a net increase in proton conductivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012