A microcalorimetric study of the action of mercuric chloride on the metabolism of mitochondria isolated from Cyprinus carpio liver tissue

After the occurrence of 'Minamata disease' in 1950, mercury aroused much more attention, and lots of studies concerned have been made. The purpose of the present paper is to study the effect of mercuric chloride on the mitochondria suspension isolated from the liver tissue of Cyprinus carpio from the direct viewpoint of energy by using the microcalorimetric method. The metabolic thermogenic curves of the mitochondria suspension at 25°C were obtained, and the mitochondria metabolic thermokinetic equations were established, from which we obtained the thermodynamic and thermokinetic parameters: thermogenic rate constant (k), heat output (Q), average heat power (P_av), etc. Experimental results indicated that low concentration of mercuric chloride (5 nmol Hg²⁺/(mg protein)) stimulates the thermogenesis of mitochondria, suggesting a strong effect of uncoupling action, while high concentration of mercuric chloride (20 nmol Hg²⁺/(mg protein)) inhibits the metabolism of mitochondria completely, suggesting a fatal effect on the phosphorylation system. The effect of Hg²⁺ on mitochondria is concentration-depended, from which the probable reaction mechanism of Hg²⁺ to the mitochondria was proposed. So the microcalorimetric method can be used in the toxicology research.     

Preparation and Characterization of Sol-Gel SE-30-Coated Silica Stationary Phase for Capillary Liquid Chromatography

A sol-gel chemistry-based polymer coating approach was developed for the preparation of a novel polysiloxane-coated silica stationary phase for capillary liquid chromatography. SE-30, a commercial polysiloxane stationary phase used in gas chromatography, was incorporated into the properly designed sol solution. Then the sol-gel mixture was introduced into a silica gel-packed capillary column by pressure. A thin film of sol-gel SE-30-coating is chemically bonded to the surface of silica gel particles by hydrolytic polycondensation under mild conditions without any free radical cross-linking procedures, therefore the sol-gel approach offers a simple and effective pathway to create a hybrid polymer-coated silica stationary phase. Various factors affecting column making were optimized and discussed in this report. The resulting stationary phase showed good permeability, mechanical robustness, high durability to alkaline mobile phase and satisfactory chromatographic performance in separations of polar and non-polar aromatic compounds. Linear solvation energy relationships (LSERs) studies indicate that the stationary phase has a reversed-phased character with SE-30 providing chromatographic functionality. The solute size and the solute hydrogen bond ability are major factors that principally govern the retention of test solutes.     

Quantum scattering calculation of the O(1D)+HBr reaction

Three-dimensional time-dependent quantum wave packet calculation for the O((1)D)+HBr reaction has been carried out using an accurate ab initio global potential energy surface [K. A. Peterson, J. Chem. Phys. 113, 4598 (2000)]. The calculations show that the initial state-selected reaction probabilities are dominated by resonance structures, and the lifetime of the resonance is generally in the subpicosecond time scale. The energy dependence of the reaction cross section is computed, which manifests still resonance structures, and is a decreasing function of the translational energy. The thermal rate constants are also computed, which are nearly independent on the temperature. The calculation results are discussed and compared to similar reaction with deep well.     

Direct determination of brucine by square wave voltammetry on 4-amino-2-mercaptopyrimidine self-assembled monolayer gold electrode

4-Amino-2-mercaptopyrimidine self-assembled monolayer (AMP SAMs/Au) was prepared on a gold electrode. The AMP SAMs/Au was characterized by using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. Impedance. The electrochemical behavior of brucine on AMP SAMs/Au was studied by cyclic voltammetry (CV) and square wave adsorptive stripping voltammetry (SWASV). The modified electrode showed an excellent electrocatalytic activity for the redox of brucine. The catalytic current increased linearly with the concentration of brucine in the range of 4.0 x 10(-7) to 2.0 x 10(-4) mol l(-1) by square wave voltammetry response. The detection limit was 6.0 x 10(-8) mol l(-1).     

Synthesis, structural characterization and ferrimagnetic property of MnPS3 intercalated with nickel(II) cyclopolyamine complex cations

Two new intercalation compounds were prepared by the reactions of Ni(II) cyclopolyamine complex cations with a preintercalate Mn_1−xPS₃K_2x(H₂O)_y, respectively, through “ion exchange” process. Their structures were characterized by elemental analysis, X-ray powder diffraction and infrared spectroscopy. The lattice spacing increased 0.567 and 1.093 nm with respect to the pristine MnPS₃. Ferrimagnetism of the intercalates was confirmed by SQUID experiment with T_c at 40 and 33 K, respectively.     

Synergetic degradation of chitosan with gamma radiation and hydrogen peroxide

Chitosan samples were irradiated by ⁶⁰Co γ-rays in the presence of hydrogen peroxide with radiation dose from 10 kGy to 100 kGy. The degradation was monitored by gel permeation chromatography (GPC), revealing the existence of a synergetic effect on the degradation. Structures of the degraded products were characterized with Fourier-transform infrared spectra (FT-IR), ultraviolet-visible spectral (UV-vis) analysis, and X-ray diffraction (XRD). Results showed that the crystallinity of chitosan decreases with degradation, and the crystalline state of water-soluble chitosan is entirely different from that of water-insoluble chitosan. An elemental analysis method was employed to investigate changes in the element content of chitosan after degradation. Mechanism of chitosan radiation degradation with and without hydrogen peroxide was also discussed.     

Molecular films of water-miscible ionic liquids formed on glassy carbon electrodes: characterization and electrochemical applications

This letter describes the formation and possible electrochemical applications of molecular films of water-miscible imidazolium-based ionic liquids (ILs) on glassy carbon (GC) electrodes. X-ray photoelectron spectroscopy (XPS) and electrochemical results indicate that the water-miscible ILs used in this study can interact with the GC electrode and form molecular films on the electrode surface. The formed molecular films are found to possess striking electrochemical properties such as electrocatalysis toward ascorbic acid (AA) and the capability to facilitate direct electron transfer of horseradish peroxidase (HRP). This demonstration would pave the way for new electrochemical applications of water-miscible ILs and is envisaged to be useful for the investigation of the electrochemical properties of water-miscible ILs in aqueous media provided the same counteranion is used as the supporting electrolyte.     

Extremal k *-Cycle Resonant Hexagonal Chains

Denote by ^* _n the set of all k ^*-cycle resonant hexagonal chains with n hexagons. For any B _n ^* _n , let m(B _n ) and i(B _n ) be the numbers of matchings (=the Hosoya index) and the number of independent sets (=the Merrifield–Simmons index) of B _n , respectively. In this paper, we give a characterization of the k ^*-cycle resonant hexagonal chains, and show that for any B _n ^* _n , m(H _n )m(B _n ) and i(H _n )i(B _n ), where H _n is the helicene chain. Moreover, equalities hold only if B _n =H _n .     

用质谱技术对钾、钙同位素体系特征参数测定的初探

报道了用FinniganMAT 2 62质谱技术和同位素稀释法测定了光谱纯CaO和国际二级标准Tahiti(CaCO3)的同位素40 Ca 42 Ca比值以及后者的40 Ca含量 ,RSD分别为 0 .0 2 %和 0 .1 %。对国家钾标样的测定表明 :39K、40 K和41 K同位素丰度分别为 0 .93 2 60± 0 .0 0 1 2、0 0 0 0 1 1 2 0± 0 .0 0 0 0 1 2 9和 0 .0 672 86± 0 .0 0 0 1 2 5。其中39K含量为 0 .1 2 1 72± 0 .0 0 0 2 9,与标准值在误差范围内一致。实验测定结果为在我国开展40 K 40 Ca同位素体系的定年和环境的示踪研究打下了基础     

Preparation of 103Pd seeds Part II. “Molecular Plating” of 103Pd onto copper rod

A method for ¹⁰³Pd molecular plating onto the surface of the copper rod is reported. The optimal composition of the plating bath was: palladium chloride 2 g/l, ammonium hydroxide (28%) 150 ml/l, sodium hypophosphite 12 g/l, and ammonium chloride 37 g/l. The whole procedure of ¹⁰³Pd molecular plating will last 50 minutes at 40 °C. This article provides valuable experience for the preparation of ¹⁰³Pd seeds.