Influence of extended π-conjugation units on carrier mobilities in conducting polymers

Carrier mobilities in thin films of copolymers with repeat units consisting of oligothiophenes bridged by Si atoms are measured over a range of doping levels, where the numbers of thienylenes in the repeat unit are 7, 8, 10, 12, and 14. The mobilities for these polymer films increased with the increase in doping level and the mobility enhancement followed an increasing order of the π-conjugation length. The magnitude of the mobility increase for the Si polymer comprising 14 thiophene units reached ca. 10⁴, implying that this π-conjugation length is almost sufficient to reproduce transport properties of polythiophenes.     

Simultaneous determination of cefazolin in rat blood and brain by microdialysis and microbore liquid chromatography

A sensitive microbore liquid chromatographic method combined with the minimally invasive technique of microdialysis was devised for simultaneously and continuously monitoring the levels of unbound blood and brain cefazolin in rats. Microdialysis probes were inserted into the jugular vein and brain striatum for blood and brain sampling, respectively. Chromatographic conditions consisted of a mobile phase of methanol-acetonitrile-100 mM monosodium phosphoric acid (20:10:70, v/v, pH 4.5) pumped through a microbore reversed-phase column at a flow rate of 0.05 mL/min. The ultraviolet detection wavelength was set at 270 nm. An on-line design allowed direct and continuous analysis of protein-free samples in the dialysate. Microdialysis probes, being home-made, were screened for acceptable in vivo recovery. Chromatographic resolution and detection were validated for response linearity as well as intra-day and inter-day variabilities. This method was then applied to pharmacokinetic profiling of protein unbound cefazolin in both the blood and brain following intravenous administration (10 mg/kg, i.v., n = 6). Rapid appearance of cefazolin in the rat brain striatal dialysate following drug injection suggested good blood-brain barrier penetration. According to a non-compartmental pharmacokinetics model, the area under the concentration (AUC) vs time ratio of cefazolin in rat brain and blood was 6%.     

New results on photoion pair formation from application of the velocity imaging photoionisation coincidence technique

The velocity imaging photoionisation coincidence (VIPCO) technique is shown to be a powerful tool for studies of ion pair formation. Sequential mechanisms are demonstrated for some three-body ion pair formation reactions. Observation of a new type of reaction producing one negatively and two positively charged ions plus an electron is reported.     

The effect of gamma-irradiation of anthracite coal and oil bitumen

Anthracite coal and oil bitumen were submitted to γ-radiation at a total dose of 1 MGy and the radiation-processed samples were studied by FT-IR spectroscopy, thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The coal samples were studied also by TGA coupled with FT-IR spectroscopy of the evolved gases. Thermal analysis has revealed a completely different behavior of the radiolyzed samples in comparison to the unirradiated samples. Both for coal and bitumen significantly less volatile fraction was released during the TGA and in both cases a significant increase in the amount of carbon coke produced at 800-900 °C was observed. The radiation processed bitumen increased significantly its ethyl acetate insolubles content. These results were interpreted in terms of extensive crosslinking and coalification of the samples under the action of γ-radiation. The results of this study have been applied to the carbonization process of terrestrial sedimentary organic matter which is commonly attributed to the action of heat flux from the depth of the Earth but which may be also due to the action of natural radiation. Other application of the results of the present study is to the complex organic matter present on the surfaces of comets and meteorites. This complex matter was formed by exposure of simple precursors to a field of high energy radiation for millions or billions of years and is consequently transformed into coal-like and bitumen-like matter. The same arguments apply to the carbon grains present in the interstellar and circumstellar medium. This revised version was published online in July 2006 with corrections to the Cover Date.     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.     

Comparative study of the catalytic properties of V2O5, Nb2O5 and Ta2O5 in the oxidation of methanol to formaldehyde

The selectivity of the oxides under consideration to the oxidation of methanol to formaldehyde is shown to increase in the sequence V₂O₅–Nb₂O₅–Ta₂O₅. The same sequence corresponds to the decrease in specific activity. The activation energy of the reaction is 12 kcal/mol for V₂O₅, 14 kcal/mol for Nb₂O₅ and 22 kcal/mol for Ta₂O₅.

---

, V₂O₅–Nb₂O₅–Ta₂O₅. . : V₂O₅ 12 /, Nb₂O₅ 14 / Ta₂O₅ 22 /.

     

Hydrophilic polymer membranes containing carboxylic groups—I. Acrylic acid—methyl methacrylate—glycidyl methacrylate copolymers

Copolymers of acrylic acid, methyl methacrylate and glycidyl methacrylate have been synthesized and converted into cross-linked hydrophilic membranes by successive treatments with heat, alkali solution and acidic solution. The copolymerization was carried out in solution using tetrahydrofuran and p-dioxane as solvents. The polymer was obtained as a clear viscous solution at yields of approximately 95%. The polymerization was stopped before gelation took place. This gelation resulted from the reaction of epoxy and carboxylic groups of the polymeric chain. The polymerization time ranged from 3.5 to 7 hr depending on the content of the glycidyl methacrylate in the feed. The monomer mixture consisted of 25–45 mol% of acrylic acid, 40–70 mol% of methyl methacrylate and 2.5–15 mol% of glycīdyl methacrylate. With increasing content of acrylic acid, the membranes became soft and elastic; with decreasing content, they became brittle and hydrophobic. The swelling of the cured polymeric film increased with increase in the acrylic acid content of the monomer mixture and decreased with increasing glycidyl methacrylate content. Dialysis runs were conducted with sodium chloride, urea and a series of ethylene glycols with molecular weights up to 600. The permeability coefficients through the membranes for the ethylene glycols were similar to those through a commercial cellulose membrane (Cuprophane). The permeability proportional to $\text{(permeant molecular wt)}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$. The membranes showed very low permeabilities to sodium chloride compared with those of commercial nonionic membranes. This appears to be due to the ionic exclusion mechanisms expected for ion exchange membranes.     

Electron spin echo as a tool for investigation of surface structure of finely dispersed fractal solids

The ESE method was successfully used for investigating the texture of the adsorbents and catalysts. Equations were obtained for the kinetics of ESE signal decay due to dipole-dipole interaction between motionless paramagnetic centers distributed uniformly on the fractal surface of solid.

---

, . , , .

     

Metallchelate mit Acetophenon-Benzoylhydrazon und Acetophenon-Salicoylhydrazon

The stoichiometry and structure of acetophenone benzoylhydrazone and acetophenone salicoylhydrazone chelates with some divalent metal ions are studied by conductometric titration and visible and infra-red absorption spectrophotometry. The results are supported by analysis of the solid complexes. The infra-red study revealed that coordination occurs through C=O and C=N groups. The shift in the C=O and C=N bands is utilised for the determination of bond lengths.