Mass resolved MPI spectra of methyl iodide in the 430-490 nm region

The mass resolved multiphoton ionization (MPI) spectra of methyl iodide were obtained in the 430-490 nm region using a time-of-flight (TOF) mass spectrometer. They have the same vibrational structure, which testifies that the fragment species, in the wavelength region under study, are from the photodissociation of multiphoton ionized molecular parent ions. Some features in the spectra are identified as three-photon excitations to 6p and 7s Rydberg states of methyl iodide. Two new vibrational structures of some Rydberg states are observed. The mechanism of ionization and dissociation is also discussed.     

Electrostatic layer-by-layer assembled carbon nanotube multilayer film and its electrocatalytic activity for O2 reduction

Multilayer films of shortened multiwalled carbon nanotubes (MWNTs) are homogeneously and stably assembled on glassy carbon electrodes with the layer-by-layer (LBL) method, based on electrostatic interaction of positively charged poly(diallyldimethylammonium chloride) and negatively charged and shortened MWNTs. The film assembly and electrochemical property as well as the electrocatalytic activity toward O2 reduction of the MWNT multilayer film are studied. Scanning electron microscopy, the quartz crystal microbalance technique, ultraviolet-visible-near-infrared spectroscopy, and cyclic voltammetry are used for characterization of film assembly. Experimental results revealed that film growth is uniform, almost with the same coverage of the MWNTs in each layer, and that the assembled MWNTs are mainly in the form of small bundles or single tubes on the electrodes. Electrochemical studies indicate that the LBL assembled MWNT films possess a remarkable electrocatalytic activity toward O2 reduction in alkaline media. This property, combined with the well-dispersed, porous and conductive features of the MWNT film illustrated with the LBL method, suggests the potential application of the MWNT film for constructing an efficient alkaline air electrode for energy conversions.     

Electrochemical investigation of redox thermodynamics of immobilized myoglobin: ionic and ligation effects

In this study, we investigated redox thermodynamics of myoglobin as well as the ionic (phosphate ions) and ligation (imidazole) effects via a dynamic electrochemical approach. We employed a previously established system that features nonmediated, direct electrochemistry of myoglobin and myoglobin in an immobilized state (i.e., diffusionless electrochemistry). Thermodynamics parameters were obtained by measuring redox potential (E degrees ') of myoglobin at varied temperature (T), in the presence and in the absence of specific ions or axial ligands. As a step further, we evaluated contributions from allosteric effect and axial iron ligation by partitioning E degrees ' changes into entropic and enthalpic terms. Compensation phenomena between the entropic and enthalpic changes were observed in all these cases. On the basis of these studies, we also correlated these phenomena to possible structural variations.     

Analysis of organic compounds in environmental samples by headspace solid phase microextraction

The analysis of samples contaminated by organic compounds is an important aspect of environmental monitoring. Because of the complex nature of these samples, isolating target organic compounds from their matrices is a major challenge. A new isolation technique, solid phase microextraction, or SPME, has recently been developed in our laboratory. This technique combines the extraction and concentration processes into one step; a fused silica fiber coated with a polymer is used to extract analytes and transfer them into a GC injector for thermal desorption and analysis. It is simple, rapid, inexpensive, completely solvent-free, and easily automated. To minimize matrix interferences in environmental samples, SPME can be used to extract analytes from the headspace above the sample. The combination of headspace sampling with SPME separates volatile and semi-volatile analytes from non-volatile compounds, thus greatly reducing the interferences from non-target compounds. This paper reports the use of headspace SPME to isolate volatile organic compounds from various matrices such as water, sand, clay, and sludge. By use of the technique, benzene, toluene, ethyl-benzene, and xylene isomers (commonly known as BTEX), and volatile chlorinated compounds can be efficiently isolated from various matrices with good precision and low limits of detection. This study has found that the sensitivity of the method can be greatly improved by the addition of salt to water samples, water to soil samples, or by heating. Headspace SPME can also be used to sample semi-volatile compounds, such as PAHs, from complex matrices.     

Enantioselective Hydrogenation of Endocyclic Enones:the Solution to a Historical Problem

The enantioselective hydrogenation of endocyclic enones has been a historical problem for homogeneous catalysis.We herein report an efficient method to reduce e...     

金属组学在急性心肌梗死早期诊断的应用

为探讨急性心肌梗死(AMI)患者血清中K⁺、Na⁺、Ca²⁺、Fe²⁺、Mg²⁺含量变化,并研究其与心肌梗死患者之间的关系。选取2022年5月至2023年2月收治的AMI患者37例,同时选取健康体检者35例作为对照组。依据入院时或体检时收集的抽血样本进行临床生化分析,比较两组间血清K⁺、Na⁺、Ca²⁺、Fe²⁺、Mg²⁺含量,采用判别方程、主成分分析法(PCA),判断分析哪种金属离子对于心肌梗死的诊断价值大。结果表明,AMI患者的血清中Ca²⁺和Fe²⁺含量低于健康对照组,差异具有统计学意义。基于血钙、铁水平两组具有显著性差异,以它们为基础进行判别分析,获得判别函数式。将血清中K⁺、Na⁺、Ca²⁺、Fe²⁺、Mg²⁺     

激光诱导击穿光谱(LIBS)技术在低碳钢铁冶金行业的应用

激光诱导击穿光谱技术(Laser induced breakdown spectroscopy,简称LIBS)是一种基于激光等离子体的发射光谱技术,具有样品制备简单,分析迅速,多元素同时分析,现场在线和远程分析等独特优势,已在钢铁冶金领域取得了越来越广泛的应用与发展。综述了近年来LIBS技术在钢铁冶金领域的应用研究进展,从冶金生产的全流程进行介绍,包括矿石、熔融钢水/铁水、钢铁产品及炉渣和废气分析。同时,还总结了LIBS技术在钢铁冶金领域应用的优点和缺点,并对该技术的应用前景及未来发展方向进行展望。     

X射线荧光光谱(XRF)法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量

建立了X射线荧光光谱法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量的快速分析方法。以标准物质及标准物质与基准试剂氧化镁、氧化钙人工混合配制标样的方法建立标准工作曲线,重点讨论了熔剂和脱模剂的选取。最佳熔样条件：采用8.0g四硼酸锂和偏硼酸锂混合熔剂(质量比67: 33)+0.8g样品并添加溴化锂作为脱模剂,熔样温度1100℃,熔样时间10min。该方法相对标准偏差(n=12)均小于5.57%,绿泥石样品测定结果与化学法一致,硅酸盐标准物质测定结果均满足不确定度要求。     

无机元素与计量学模型结合的半夏产地溯源研究

目的:建立不同产地半夏无机元素的分析方法和溯源体系,为半夏药材的质量控制和道地性评价提供技术支持。方法:采用电感耦合等离子体质谱法(ICP-MS)和电感耦合等离子体原子发射光谱法(ICP-AES)对我国6个主产区72份半夏样品中K、Ca、Na、Mg、Al等37种无机元素的含量进行测定,并采用方差分析、主成分分析、因子分析等计量学方法进行统计与评价。通过对比BP-神经网络算法、K-最近邻算法、最小二乘支持向量机等多种模式识别方法,探索适合半夏产地溯源的最佳模型。结果:不同产地半夏中无机元素的构成各具特征,各无机元素含量在产地间差异显著(P＜0.05),其中La、Pb、As、Na、Bi、Hg、Sn、Cd、Ag 9种元素在不同产区间的差异最为明显;3D-plots图显示不同产地半夏样品分布相对集中,具备产地分类的可行性;KNN分类模型(曼哈顿距离)是半夏产地溯源的最佳方法,测试集的正确率达到100%。结论:无机元素分析技术结合适当的计量学模型可以实现半夏的产地溯源。     

锗元素测定方法综述

锗在国防工业、航空航天和通信等领域中的战略性,锗含量的测定对于保证材料质量和满足国际标准至关重要。本文综述了锗含量测定方法的多种技术,包括分光光度法、原子荧光光谱法、原子吸收光谱法、电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法以及滴定法。在每个检测方法的介绍中,详细探讨了方法的原理、前处理步骤以及应用范围,并分别总结了各个方法的优势和不足。最后,强调了锗含量测定方法的意义,特别是在满足出口监管和促进科学研究方面的作用。同时对锗元素的测定方法进行了展望,为未来的发展提供了参考方向。