Cobalt‐based metal coordination polymers with 4,4′‐bipyridinyl groups: highly efficient catalysis for one‐pot synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions

Three new metal coordination complexes, namely [Co(BPY)₂(H₂O)₂](BPY)(BS)₂(H₂O)₄ ( 1 ), [Co(BPY)₂(H₂O)₄](ABS)₂(H₂O)₂ ( 2 ) and [Co(BPY)(H₂O)₄](MBS)₂ ( 3 ) (BPY = 4,4′‐bipyridine, BS = phenylsulfonic acid, ABS = p‐aminobenzenesulfonic acid, MBS = p‐methylbenzenesulfonic acid), were obtained under hydrothermal conditions. Complexes 1 , 2 , 3 were structurally characterized using single‐crystal X‐ray diffraction and infrared spectroscopy. All of them display low‐dimensional motifs: complex 1 displays a two‐dimensional structure; and complexes 2 and 3 exhibit a one‐dimensional tape structure. Through strong intermolecular hydrogen bonding interactions and weak packing interactions, all of them further stack to generate a three‐dimensional supramolecular architecture. Catalysts 1 , 2 , 3 were involved in the green synthesis of a variety of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions through Biginelli reactions. The corresponding catalytic product was obtained in quantitative yields (99%) under eco‐friendly synthesis conditions for the variety of reactions. Catalysts 1 , 2 , 3 exhibit excellent efficiency for the desired product, and their catalytic performance shows the following order: 2  >  1  ≈  3 , which can be ascribed to the hydrophobic interactions of different phenylsulfonate groups. The catalytic performance for the Biginelli reaction is not only dependent on the selected solvents, but also inversely proportional to the polarities of the solvents. Copyright © 2016 John Wiley & Sons, Ltd.     

The Synthesis and Biological Activities of [5-(4-Substituted Phenylsulfinyl/Sulfonyl)-1,3-Dimethyl-1H-Pyrazol-4-Yl]-Arylmethanones

Abstract

A novel series of pyrazole derivatives containing substituted phenylsulfinyl/sulfonyl group have been synthesized via the oxidation of intermediate pyrazole sulfoether with H₂O₂ in acetic acid. The novel compounds were characterized by melting point, ¹H NMR, FT-IR, MS, and elemental analysis or HRMS. The biological activity results showed that most of the title compounds exhibit significant fungicidal activities against Alternaria solani Sorauer, Phytophthora capsici, and Corynespora cassiicola.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.]     

Synthesis of multi‐functionalized carbonyl compounds by palladium–catalysed γ‐substitution of MBH adducts with activated amides

Catalytic allylic γ‐substitution with Morita‐Baylis‐Hillman (MBH) adducts for creating a new family of unsymmetrical dicarbonyl compounds was presented in this work, in which a variety of allylated amide products were achieved in good yields and high regioselectivity with excellent linear‐to‐branched ratios. Especially, it was found that the Pd/HZNU‐Phos complex exhibited remarkably high activity (with a TON up to 16800) in this transformation between dicarbonyl amides and MBH adducts. In addition, the possibly multisite interaction between multifunctional Pd/HZNU‐Phos catalyst system and substrates might responsible for its exceptionally high efficiency in this reaction.     

A local damage detection approach based on restoring force method

Chain-like systems have been studied by many researchers for their simple structure and wide range of application. Previously, the damage in a chain-like system was detected by the reduction of the mass-normalized stiffness coefficient for certain elements as reported by Nayeri et al. (2008 [16]). However, some shortcomings exist in that approach and for overcoming them; an improved approach is derived and presented in this paper. In our improved approach, the mass normalized stiffness coefficients under two states (baseline state and potentially damaged state) are first estimated by a least square method, then these mass-stiffness coupled coefficients are decoupled to derive stiffness and mass relative change ratios for individual elements. These ratios are assembled in a vector, which is defined as damage indication vector (DIV). Each component in DIV is normalized individually to one to get multiple solutions. These solutions are averaged for estimating relative system changes, while abnormal solutions are discarded. The work of judging a solution as normal or abnormal is done by a cluster analysis algorithm. The most intriguing merit of this improved approach is that the relative stiffness and mass changes, which are coupled in the previous approach, can be separately identified. By this approach, the damage (single or multiple) extent and location can be correctly detected under operational conditions, meanwhile the proposed damage index has a clear physical meaning and is directly related to the stiffness reduction of corresponding structural elements. For illustrating the effectiveness and robustness of the improved approach, numerical simulation of a four floor building was carried out and experimental data from a structure tested at the Los Alamos National Laboratory was employed. Identified structural changes with both simulation and experimental data properly indicated the location and extent of actual structural damage, which validated the proposed approach.     

Optimizing Optoelectronic Properties of Pyrimidine‐Based TADF Emitters by Changing the Substituent for Organic Light‐Emitting Diodes with External Quantum Efficiency Close to 25 % and Slow Efficiency Roll‐Off

A series of green butterfly‐shaped thermally activated delayed fluorescence (TADF) emitters, namely PXZPM , PXZMePM , and PXZPhPM , are developed by integrating an electron‐donor (D) phenoxazine unit and electron‐acceptor (A) 2‐substituted pyrimidine moiety into one molecule via a phenyl‐bridge π linkage to form a D –π–A–π–D configuration. Changing the substituent at pyrimidine unit in these emitters can finely tune their emissive characteristics, thermal properties, and energy gaps between the singlet and triplet states while maintaining frontier molecular orbital levels, and thereby optimizing their optoelectronic properties. Employing these TADF emitters results in a green fluorescent organic light‐emitting diode (OLED) that exhibits a peak forward‐viewing external quantum efficiency (EQE) close to 25 % and a slow efficiency roll‐off characteristic at high luminance.     

Molecular‐level structures at poly(4‐vinyl pyridine)/acid interfaces probed by nonlinear vibrational spectroscopy

The molecular structures of the interfaces between a solid poly(4‐vinyl pyridine) (P4VP) surface and poly(acrylic acid) (PAA) as well as hydrochloric acid (HCl) solutions were probed using sum frequency generation (SFG) vibrational spectroscopy in situ in real time. Spectroscopic results clearly reveal that the PAA molecules are adsorbed onto the P4VP surface via hydrogen bonding at the P4VP/PAA solution interface while the P4VP surface is protonated at the P4VP/HCl solution interface. Consequently, the water molecules near the interfaces are strongly perturbed by these two interactions, exhibiting different orderings at the two interfaces. This work clearly demonstrates the power of studying the interfacial molecular‐level structures via nonlinear vibrational spectroscopy when molecular adsorption happens at the solid–liquid interface and paves a way for our future study on tracing the adsorption dynamics of polymer chains onto solid surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 848–852     

冶金法生产太阳能级硅的除硼方法、技术及工艺

太阳能作为一种绿色可再生能源受到了广泛关注,而杂质去除是从冶金级硅中获得太阳能级硅所需的纯化过程,对硅基太阳能电池的制备至关重要。冶金法制备太阳能级多晶硅新工艺技术由于其能耗低、成本低和污染少等优点,成为研究开发的热点,但如何有效地去除硼是我们面临的最严峻的挑战之一。本文综述了硼的热力学和动力学性质(溶解度、扩散率、扩散系数、传质系数和活度系数)以及近年来除硼的相关课题研究(吹气、炉渣处理、等离子体处理、酸浸和溶剂精炼)。研究发现,溶剂精炼是一种很有前途的获取高纯硅的方法,硅的富集率以及硼的去除率均可达到90%以上,而添加剂能够加强硼化物的形成和析出来改进除硼工艺,且后续几乎可被完全消除,不会对精炼硅造成污染,这将更加有效除硼并增加工艺实用性。最后本文对几种除硼工艺进行了比较分析,并对冶金法的应用前景进行了展望。     

Analytical Solution to Subsurface Air Pressure in a Three-Layer Unsaturated Zone with Atmospheric Pressure Changes

In this study, a solution to one-dimensional vertical airflow induced by the time-dependent atmospheric pressure fluctuations is developed in a three-layer unsaturated zone. The discrete atmospheric pressure data are transformed into a continuous boundary condition using the Fourier series analysis. The solution is applied to interpret the field air pressure data in a three-layer unsaturated zone reported in previous studies. The new solution improves the previous solution by reducing the required data measurement and input. The new solution is found to be accurate enough for the purpose of this study by comparing with a numerical solution developed in COMSOL Multiphysics. Given the necessary hydrogeological parameters, the new solution is capable of calculating the air permeability of each layer above a specified depth where the air pressures are known. Sensitivity analysis of the new solution shows that location, thickness, and air permeability of the less permeable layer impose large influence on the propagation of the atmospheric pressure fluctuations. Variations of air-filled porosity in soil layers in/below the less permeable layer may lead to greater amplitude attenuation and phase lag of air pressure than those in soil layers above the less permeable layer.