Emergence of a Lanthanide Chalcogenide as an Ideal Scintillator for a Flexible X-ray Detector

The development of high-performance X-ray detectors requires scintillators with fast decay time, high light yield, stability, and X-ray absorption capacity, which are difficult to achieve in a single material. Here, we present the first example of a lanthanide chalcogenide of LaCsSiS₄ : 1 % Ce³⁺ that simultaneously integrates multiple desirable properties for an ideal scintillator. LaCsSiS₄ : 1 % Ce³⁺ demonstrates a remarkably low detection limit of 43.13 nGy_air s⁻¹ and a high photoluminescence quantum yield of 98.24 %, resulting in a high light yield of 50480±1441 photons/MeV. Notably, LaCsSiS₄ : 1 % Ce³⁺ exhibits a fast decay time of only 29.35±0.16 ns, making it one of the fastest scintillators among all lanthanide-based inorganic scintillators. Furthermore, this material shows robust radiation and moisture resistance, endowing it with suitability for chemical processing under solution conditions. To demonstrate the X-ray imaging capacity of LaCsSiS₄ : 1 % Ce³⁺, we fabricated a flexible X-ray detector that achieved a high spatial resolution of 8.2 lp mm⁻¹. This work highlights the potential of lanthanide chalcogenide as a promising candidate for high-performance scintillators.     

Kinetic-spectrophotometric determination of trace amounts of vanadium(V) based on its catalytic effect on the reaction of DBM-arsenazo and potassium bromate

A simple and sensitive kinetic-spectrophotometric method is developed for the determination of trace vanadium(V), based on the catalytic effect of vanadium(V) on the oxidation of DBM-arsenazo by potassium bromate in 0.0138 moll(-1) phosphoric acid medium and at 100 degrees C in the presence of citric acid as activator. The absorbance is measured at 528 nm with the fixed-time method. The optimization of the operating conditions regarding concentrations of the reagents, temperature and interferences are also investigated. The working curve is linear over the concentration range 0-20 ngml(-1) of vanadium(V) with good precision and accuracy and the detection limit was down to 3.44 ngl(-1). The relative standard deviation for a standard solution of 14 ngml(-1) is 0.28% (n=11). The apparent activity energies of the catalytic reaction and the non-catalytic reaction are 73.48, 113.5 kJ/mol, respectively. The proposed method proved highly sensitive, selective and relatively rapid for the assay of vanadium at low-level range of 0-20 ngml(-1) without any pre-concentration step. Thw method was applied to the determination of vanadium(V) in steels, rice, flour, cabbage, potato, fish, shrimp and tea samples with satisfactory results. The obtained results for the steel samples were excellent agreement with the standard reference values. The analytical results of the rice, flour, cabbage, potato, fish, shrimp and tea samples were excellent agreement with those of atomic absorption spectrometry. The recovery experiments have been made for the rice, flour, cabbage, potato, fish, shrimp and tea samples except the steels; excellent results were obtained. The relative standard deviations were over the range of 0.18-2.60% and the recoveries were over the range of 98.00-102.4%, respectively. The analytical results obtained were satisfactory.     

Nanoparticle-textured surfaces from spin coating

Rough surfaces composed of discrete but relatively uniform nanoparticles were prepared from a lightly sulfonated polystyrene ionomer by spin coating from tetrahydrofuran (THF) or a THF/methanol mixture onto a silica surface. The particle morphology is consistent with the spinodal decomposition of the film surface occurring during spin coating. The particles are well wetted to the silica, and if heated for a long time above the ionomer's glass-transition temperature, the particles flow and coalesce into a smooth, homogeneous film.     

Wetting behavior of lightly sulfonated polystyrene ionomers on silica surfaces

The wetting/dewetting behavior of thin films of lightly sulfonated low molecular weight polystyrene (SPS) ionomers spin-coated onto silica surfaces were studied using atomic force microscopy (AFM), contact angle measurements, and electron microscopy. The effects of the sulfonation level, the choice of the cation, the solvent used to spin-coat the films, and the molecular weight of the ionomer were investigated. Small angle X-ray scattering was used to determine the bulk microstructure of the films. The addition of the sulfonate groups suppressed the dewetting behavior of the PS above its glass transition temperature, e.g. no dewetting occurred even after 240 h of annealing at 120 degrees C. Increasing the sulfonation level led to more homogeneous and smoother surfaces. The choice of the cation used affected the wetting properties, but not in a predictable manner. When tetrahydrofuran (THF) or a THF/methanol mixed solvent was used for spin-casting, a submicron-textured surface morphology was produced, which may be a consequence of spinodal decomposition of the film surface during casting. Upon annealing for long times, the particles coalesced into a coherent, nonwetted film.     

壳寡糖铕、铽配合物的合成、表征及抗·O-2活性

用壳寡糖分别与硝酸铕和硝酸铽反应, 制备了壳寡糖-铕、壳寡糖-铽两种配合物. 用红外光谱、紫外光谱、 荧光和X射线光电子能谱(XPS)等分析测试手段对配合物进行了表征. 以吩嗪硫酸甲酯(PMS)-还原型辅酶Ⅰ烟酰胺腺嘌呤二核苷酸(NADH)-硝基四氮唑蓝(NBT)产生超氧阴离子自由基(·O-2)来研究壳寡糖和壳寡糖稀土金属配合物对·O-2自由基的清除作用. 结果表明: 壳寡糖与Eu3 或Tb3 形成了配合物, 壳寡糖-铕、壳寡糖-铽配合物中不仅壳寡糖氨基上的N原子参与了配位, 同时仲羟基的O原子也参与了配位. 壳寡糖和壳寡糖稀土金属配合物对·O-2均具有明显的清除作用, 配合物与壳寡糖相比对·O-2具有更高的清除活性.     

B2(BO)2(2-)-diboronyl diborene: a linear molecule with a triple boron-boron bond

We have produced and investigated an unique boron oxide cluster, B4O2(-), using photoelectron spectroscopy and ab initio calculations. Relatively simple and highly vibrationally resolved PES spectra were obtained at two photon energies (355 and 193 nm). The electron affinity of neutral B4O2 was measured to be 3.160 +/- 0.015 eV. Two excited states were observed for B4O2 at excitation energies of 0.48 and 0.83 eV above the ground state. Three vibrational modes were resolved in the 355 nm spectrum for the ground state of B4O2 with frequencies of 350 +/- 40, 1530 +/- 30, and 2040 +/- 30 cm(-1). Ab initio calculations showed that neutral B4O2 (D(infinity h), 3sigma(g)-) and anionic B4O2(-) (D(infinity h), 2pi(u)) both possess highly stable linear structures (O[triple bond]B-B=B-B[triple bond]O), which can be viewed as a B2 dimer bonded to two terminal boronyl groups. The lowest nonlinear structures are at least 1.5 eV higher in energy. The calculated electron detachment energies from the linear B4O2- and the vibrational frequencies agree well with the experimental results. The three observed vibrational modes are due to the B-B, B=B, and B[triple bond]O symmetric stretching vibrations, respectively, in the linear B2(BO)2. Chemical bonding analyses revealed that the HOMO of B2(BO)2, which is half-filled, is a bonding pi orbital in the central B2 unit. Thus, adding two electrons to B2(BO)2 leads to a B[triple bond]B triple bond in [O[triple bond]B-B[triple bond]B-B[triple bond]O]2-. Possibilities for stabilizing B2(BO)2(2-) in the form of B2(BO)2Li2 are considered computationally and compared with other valent isoelectronic, triple bonded species, B2H2Li2, B2H2(2-), and C2H2. The high stability of B2(BO)2(2-) suggests that it may exist as a viable building block in the condensed phase.     

Synthesis and cytotoxicity studies of novel [1,2,4]triazolo[1,5-a]pyrimidine-7-amines

A series of novel N-anilino-5-methyl-2-(3-(5-(alkylaminomethyl)furan-2-yl-methylthio)propyl)-[1,2,4]triazolo-[1,5-a]pyrimidine-7-amine derivatives were synthesized and evaluated for their in vitro cytotoxicity against two cancer cell lines, Bel-7402 and HT-1080. Compounds 9, 14, 19 and 23 possessed marked cytotoxicity, especially 23 (with IC(50) values of 15.0 microM and 7.8 microM against Bel-7402 and HT-1080 cell lines, respectively), which had emerged as lead compound. The activity was found to depend strongly on substitution pattern of the side chains at C-2 position, and 4-triflouromethylanilino substituent at C-7 position was an option for anticancer potency.     

Rapid synthesis of polyethylenimine-protected prussian blue nanocubes through a thermal process

Polyethylenimine (PEI)-protected Prussian blue nanocubes have been simply synthesized by heating an acidic mixture of PEI, FeCl 3, K 3Fe(CN) 6, and KCl. The experiment results presented here demonstrate that the pH of the mixture plays an important role in controlling the shape and composition of the resultant product.     

Synthesis and in vitro cytotoxicity of novel 1,4-disubstituted phthalazines

Eight novel 1,4-disubstituted phthalazines （7-14） were designed and synthesized. The structures of all the synthesized compounds were confirmed by IR,1H NMR, 13C NMR, MS and elemental analysis. Their in vitro cytotoxicity against cancer cell lines （Bel-7402 and HT- 1080） were evaluated by standard MTT assay. Among them, compounds 9 and 11 exhibited more potent cytotoxicity than cisplatin. 2007 Ping Gong. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

Architecture of Platonic and Archimedean polyhedral links

A new methodology for understanding the construction of polyhedral links has been developed on the basis of the Platonic and Archimedean solids by using our method of the ‘three-cross-curve and dou- ble-twist-line covering’. There are five classes of polyhedral links that can be explored: the tetrahedral and truncated tetrahedral links; the hexahedral and truncated hexahedral links; the dodecahedral and truncated dodecahedral links; the truncated octahedral and icosahedral links. Our results show that the tetrahedral and truncated tetrahedral links have T symmetry; the hexahedral and truncated hexahedral links, as well as the truncated octahedral links, O symmetry; the dodecahedral and truncated dodeca- hedral links, as well as the truncated icosahedral links, I symmetry, respectively. This study provides further insight into the molecular design, as well as theoretical characterization, of the DNA and protein catenanes.