双参考光全息—散斑干涉术的原理和实验

本文用统计光学方法对双参考光全息——散斑干涉术进行了详尽的理论分析,给出了全息和散斑干涉场区域平均光强分布与光学系统主要参数及三维变形场各分量之间关系的解析表达式,进而讨论了离面位移和面内位移测量的上、下限,最后还给出了有关的实验结果。     

一维快速拉伸下无氧铜的动态断裂与破碎

利用电磁膨胀环技术对无氧铜环进行了不同加载电压下的动态拉伸实验。对无氧铜在破碎前出现塑性失稳多重颈缩进行了初步分析,利用能量平衡的破碎理论给出了无氧铜环的破碎分布。三维数值模拟结果表明,颈缩区温升比非颈缩区高,且多重颈缩在环周上的分布服从泊松分布。     

非线性粘弹性拟静态问题与非线性弹性静力问题对应原理

本文应用多重单边拉氏变换导出了非线性粘弹性拟静态问题与非线性弹性静力问题的对应关系,从而把过去认为只有线性条件下存在的粘弹性——弹性对应原理拓展到了非线性范畴     

不同压实度下红层泥岩路堤沉降研究

压实系数是控制路堤填筑的关键性指标。本文通过分析不同压实系数下的强度特点以及通过离心试验和有限元对不同压实系数路堤沉降的模拟,得到粘聚力c值和摩擦角φ与不同压实系数的关系以及不同压实系数下路堤沉降的特点,为路堤填筑提供了重要的依据。     

床面固体颗粒圆柱绕流的试验现象观察

本文介绍了床面固体颗粒随水流绕过圆柱体时，将在圆柱周围的床面上形成一个无粒子运动区的试验现象。水槽试验结果表明，当固体颗粒的粒径减小时，无粒子区的范围将增大；无粒子区的范围随圆柱直径的增大而增大；水流条件的变化直接影响着床面固体颗粒的运动情况，同无粒子区的形成、消失及范围大小有密切的关系。根据试验资料，结合量纲分析，建立了无粒子区的无量纲经验关系式     

Influence of damage on properties of strain localization in geomaterials at plane stress and plane strain

Summary By regarding geomaterials under loading as a mixture of intact and damaged parts, we investigate the influence of damage on the properties of strain localization in elastoplastic geomaterials at plane stress and plane strain. Conditions for the onset of strain localization including the effects of damage are derived for the cases of plane strain and plane stress. Discussed are the inclination of the localized band and the hardening modulus corresponding to the onset of strain localization. It is shown that the properties of the strain localization are dependent on the damage and the capacity of bearing hydrostatic pressure by the damaged part, and that damage may induce an earlier onset of strain localization and lead to instability of a geomaterial.accepted for publication 11 March 2004     

RESEARCH ON IMPROVEMENTS OF LRN TURBULENCE MODEL BASED ON FLOW AROUND AUTOMOBILE BODY 1)

本文将汽车绕流模块化为各典型局部流动,通过常用湍流模型对各典型局部流动进行数值模拟,结果验证了湍流模型对转捩的捕捉能力是准确模拟汽车绕流的关键. 在分析汽车绕流分离及转捩机理的基础上,优化了稳态和瞬态求解方法,改进了湍流模型对转捩的预测能力,进而提高了湍流模型在汽车流场模拟上的精度. 针对汽车绕流的稳态问题,将流线曲率因子及 响应阈值引入 LRN $k$-$\varepsilon $ (low Reynolds number $k$-$\varepsilon $) 模型,获得了一种能够更准确预 测转捩的改进低雷诺数湍流模型 (modified LRN $k$-$\varepsilon $),改善了原模型对湍流耗散率的过强依赖性及全应力发展预测不足等问题;针对汽车绕流瞬态求解,通过分析 RANS/LES 混合湍流模型的构造思想及特点,引入约束大涡模拟方法,结合本文提出的改进的 LRN $k$-$\varepsilon $ 湍流模型,提出了一种能准确捕捉转捩现象 的转捩 LRN CLES 模型. 分别将改进的模型用于某实车外流场和风振噪声仿真中,通过 Ansys Fluent 求解器计算,并将计算结果与常用湍流模型的仿真结果、HD-2 风洞试验结果和实车道路实验结果进行对比,表明改进后的湍流模型能够更准确模拟复杂实车的稳态和瞬态特性,为汽车气动特性的研究提供了可靠理论依据及有效数值解决方法.     

气体示踪法研究燃烧器横向湍流混合扩散特性

用气体示踪法对侧边风燃烧器弱旋流一次风和侧边直流二次风横向湍流混合扩散特性进行了详细研究，讨论了各截面混合物浓度分布规律及混合强度分布规律，分析对燃料着火的影响，同时利用湍流运动方程反算气体湍流扩散系数     

Synthesis of Carbon/Sulfur Nanolaminates by Electrochemical Extraction of Titanium from Ti2SC

Herein we electrochemically and selectively extract Ti from the MAX phase Ti₂SC to form carbon/sulfur (C/S) nanolaminates at room temperature. The products are composed of multi‐layers of C/S flakes, with predominantly amorphous and some graphene‐like structures. Covalent bonding between C and S is observed in the nanolaminates, which render the latter promising candidates as electrode materials for Li‐S batteries. We also show that it is possible to extract Ti from other MAX phases, such as Ti₃AlC₂ , Ti₃SnC₂ , and Ti₂GeC, suggesting that electrochemical etching can be a powerful method to selectively extract the “M” elements from the MAX phases, to produce “AX” layered structures, that cannot be made otherwise. The latter hold promise for a variety of applications, such as energy storage, catalysis, etc.     

Revealing the Charge‐Transfer Interactions in Self‐Assembled Organic Cocrystals: Two‐Dimensional Photonic Applications

A new crystal of a charge‐transfer (CT) complex was prepared through supramolecular assembly and it has unique two‐dimensional (2D) morphology. The CT nature of the ground and excited states of this new Bpe‐TCNB cocrystal (BTC) were confirmed by electron spin resonance measurements, spectroscopic studies, and theoretical calculations, thus providing a comprehensive understanding of the CT interactions in organic donor–acceptor systems. And the lowest CT₁ excitons are responsible for the efficient photoluminescence (Φ_PL=19 %), which can actively propagate in individual 2D BTCs without anisotropy, thus implying that the optical waveguide property of the crystal is not related to the molecular stacking structure. This unique 2D CT cocrystal exhibits potential for use in functional photonic devices in the next‐generation optoelectronic communications.