An in situ STM and DTS study of the extremely pure [EMIM]FAP/Au(111) interface

Herein the structure of the interfacial layer between the air- and water-stable ionic liquid 1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate ([EMIM]FAP) and Au(111) is investigated using in situ scanning tunneling microscopy (STM), distance tunneling spectroscopy (DTS) and cyclic voltammetry (CV) measurements. The in situ STM measurements reveal that structured interfacial layers can be probed in both cathodic and anodic regimes at the IL/Au(111) interface. The structure of these layers is dependent on the applied electrode potential, the number of subsequent STM scans and the scan rate. Furthermore, first DTS results show that the tunneling barrier during the 1st STM scan does not seem to change significantly in the cathodic potential regime between the ocp (-0.2 V) and -2.0 V.     

Investigation of the two-step spin crossover complex Fe[5-NO2-sal-(1,4,7,10)] using density functional theory

A quantum chemical study of the Fe[5-NO2-sal-(1,4,7,10)] ((1,10-bis(5-nitrosalicylaldehyde)-1,4,7,10-tetra-ezdecane-O,O',N,N',N' ',N' ')iron(II)) molecule was performed using density functional theory (DFT). Starting from the different X-ray crystallographic structures, geometry optimizations have been performed. These calculations confirmed the conformational isomerism of this complex in each spin states of the molecule ((1)A(1g) and (5)T(2g)). Each employed DFT method (B3LYP, B3LYP*, BP86, HCTH407) reproduced correctly the structural differences between the two calculated conformers when compared to the experimental structures. Furthermore, electronic polarizabilities have been calculated in each spin state and for each conformer. These calculations revealed a higher polarizability in the singlet state in agreement with the measured higher dielectric constant in this state.     

Free-standing aluminium nanowire architectures made in an ionic liquid

We report on the electrochemical synthesis of free‐standing aluminium nanowire architectures through a template‐assisted electrodeposition technique. For this purpose, nuclear track‐etched polycarbonate membranes were employed as templates. One side of the template was sputtered with a thin gold film to serve as a working electrode. Subsequently the nanowires were made in the ionic liquid 1‐ethyl‐3‐methylimidazolium chloride ([EMIm]Cl)/AlCl₃ (40/60 mol %) under potentiostatic conditions. Two different electrodeposition procedures were employed to fabricate strongly adherent Al nanowire structures on an electrodeposited Al layer. In the first procedure, electrodeposition simultaneously occurs along the pores of the template and on the Au‐sputtered side of the template. In the second procedure, electrodeposition takes place in two different steps: first a thick supporting film of Al is deposited on the sputtered side of the membrane and second Al nanowires are grown within the pores. After chemical dissolution of the membrane in dichloromethane, an aluminium foil of a controlled thickness with a three‐dimensional nanowire structure on one side was obtained. Different nanowire architectures, such as free‐standing nanowires, vertically aligned tree‐shaped arrays, and bunched nanowire films, were obtained. Such nanowire architectures are of particular interest for applications in Li‐ion micro‐batteries.     

Quantum chemical study of three polymorphs of the mononuclear spin-transition complex [Fe(DPPA)(NCS)2

The calculations of the high spin (HS) and low spin (LS) states of the [Fe(II)(DPPA)(NCS)(2)] complex have been performed at three experimentally observed geometries corresponding to three synthesized polymorphs with different spin-transition behavior. The structure optimization leads to a single molecular structure, suggesting that the existence of three geometries is not an intrinsic phenomenon but is induced by the crystal lattice. The structural difference between three forms can be reproduced by introducing the Madelung field of the crystal lattice. However, the calculations show that the differences in magnetic behavior of the three polymorphs cannot be attributed only to variations of the energy gap between two spin states.     

Electrosynthesis of Poly(para)phenylene in an Ionic Liquid: Cyclic Voltammetry and in Situ STM/Tunnelling Spectroscopy Studies

The electropolymerization of benzene in the air and water‐stable ionic liquid 1‐hexyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate (HMIm)FAP is investigated. The study comprises cyclic voltammetry, IR and in situ STM/tunnelling spectroscopy measurements. The IR results indicate that poly(para)phenylene is the end product of the electropolymerization of benzene in the employed ionic liquid. The resulting conjugation lengths of the product fall between 19 and 21. A polymer reference electrode is used successfully for the electrochemical polymerization of benzene. The first in situ STM results show that the electropolymerization of benzene in the ionic liquid can be probed on the nanoscale and the band gap of the prepared polymer can be determined. The electrodeposited polymer film obtained at a constant potential of 1.0 V vs PPP (polyparaphenylene) exhibits a band gap of 2.9±0.2 eV.     

Energetics of binuclear spin transition complexes

The electronic structures of five binuclear iron(II) complexes, four of which display spin transitions between the low-spin (LS) and high-spin (HS) electronic states, are studied by density functional theory (DFT) calculations. Three electronic states, corresponding to [LS-LS], [LS-HS], and [HS-HS] electronic configurations, are characterized. The nature of the ground state agrees with the experimentally observed magnetic state of complexes stabilized at low temperatures. The results of the calculations agree with the conclusion of the phenomenological model, that the enthalpy of the [LS-HS] state must be lower than the average enthalpy of the [LS-LS] and [HS-HS] states, to create conditions for a two-step spin transition. The exchange parameters between Fe(II) ions in the [HS-HS] states are evaluated. It is shown that all complexes are weakly antiferromagnetic and the synergy between two spin transition centers is mainly of elastic origin.     

Experimental and theoretical investigation of the acoustic performance of sugarcane wastes based material

Agricultural residues present a challenge to the environment. Most of these residues are burnt in the farm causing several pollution hazards to the environment. There has been a lot of interest to find applications for these residues instead of burning them. One application can be using them as acoustic materials. This paper presents the results of the evaluation of the acoustic performance of the sugarcane wastes based material. This evaluation is made by measuring two acoustic parameters: the flow resistivity and the acoustic absorption coefficient. The manufacturing of multiple samples with different physical properties (sample thickness, fiber size, and resin content) allowed evaluating the effect of each property on the acoustical performance of the studied material. A comparison between experimental and theoretical results showed good agreement.     

Enantioselective syntheses and X-ray structures of (S)- and (R)-N-norlaudanidine: trace opium constituents

The enantioselective synthesis of each of the enantiomers of N-norlaudanidine, a minor Papaver somniferum opium benzyltetrahydoisoquinoline alkaloid is described. This was achieved using a chiral auxiliary-mediated Bischler-Napieralski cyclization-sodium borohydride reduction strategy. The X-ray crystal structures of each of these secondary amines are reported.     

In situ STM investigation of gold reconstruction and of silicon electrodeposition on Au(111) in the room temperature ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide

The electrodeposition of silicon on Au(111) was investigated by cyclic voltammety (CV) and by in situ scanning tunneling microscopy (STM) in the room temperature ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide with a SiCl(4) concentration of 0.1 mol/L. A main reduction process begins in the cyclic voltammogram at about -1800 mV versus ferrocene/ferrocinium, which is correlated to the electrodeposition of elemental semiconducting silicon. It has been found that at an electrode potential more negative than the open circuit potential (OCP), the Au(111) surface is subject to a restructuring/reconstruction both in the case of the pure ionic liquid and in the presence of SiCl(4). The first STM-probed silicon islands with 150-450 pm in height appear at about -1700 mV versus ferrocene/ferrocinium. Their lateral and vertical growth leads to the formation of a rough layer with silicon islands of up to 1 nm in height. At about -1800 mV the islands merge and form silicon agglomerates. In situ I/U tunneling spectroscopy reveals a band gap of 1.1 +/- 0.2 eV for layers of about 5 nm in height, a value that has to be expected for semiconducting silicon.     

Local self-energy approach for electronic structure calculations

Using a novel self-consistent implementation of Hedin's perturbation theory, we calculate space- and energy-dependent self-energy for a number of materials. We find it to be local in real space and rapidly convergent on second- to third-nearest neighbors. Corrections beyond are evaluated and shown to be completely localized within a single unit cell. This can be viewed as a fully self-consistent implementation of the dynamical mean field theory for electronic structure calculations of real solids using a perturbative impurity solver.