High pressure infiltration sintering behavior of WC-Co alloys

In this paper, two average tungsten carbide particle sizes of 2, 0.5?μm are placed respectively, in contact with a WC-16Co substrate, pressed at the pressure of 4.5–5.5?GPa, and heated to temperatures ranging from 1350°C to 1500°C in a large-volume cubic press. During the process Co was forced out of the WC-16Co substrate into the compressed powder. The resulting infiltrated samples were characterized using X-ray diffraction (XRD), scanning electron microscope (SEM), Vickers hardness and cutting performance tests. The results of XRD confirmed that the sintered bulks have WC and Co phases. The scanning electron microscopy (SEM) analysis reveals that the WC grains in well-sintered alloys are round in shape and cobalt with lower content is uniformly dispersed in the WC grain boundaries. The sintered sub-micron WC-Co alloy with a cobalt content of 3.8?wt% exhibits a prominent combination of high hardness value of 23.1?GPa and a large fracture toughness value of 8.6?MPa?m^½. The high-speed cutting tests indicating its cutting performance is significantly superior to the commercial YG6X (WC-6?wt%Co with WC grain size of 0.5?μm).     

Research on Optical Transmitter and Receiver Module Used for High-Speed Interconnection between CPU and Memory

With the development of the multicore processor, the bandwidth and capacity of the memory, rather than the memory area, are the key factors in server performance. At present, however, the new architectures, such as fully buffered DIMM (FBDIMM), hybrid memory cube (HMC), and high bandwidth memory (HBM), cannot be commercially applied in the server. Therefore, a new architecture for the server is proposed. CPU and memory are separated onto different boards, and optical interconnection is used for the communication between them. Each optical module corresponds to each dual inline memory module (DIMM) with 64 channels. Compared to the previous technology, not only can the architecture realize high-capacity and wide-bandwidth memory, it also can reduce power consumption and cost, and be compatible with the existing dynamic random access memory (DRAM). In this article, the proposed module with system-in-package (SiP) integration is demonstrated. In the optical module, the silicon photonic chip is included, which is a promising technology to be applied in the next-generation data exchanging centers. And due to the bandwidth–distance performance of the optical interconnection, SerDes chips are introduced to convert the 64-bit data at 800 Mbps from/to 4-channel data at 12.8 Gbps after/before they are transmitted though optical fiber. All the devices are packaged on cheap organic substrates. To ensure the performance of the whole system, several optimization efforts have been performed on the two modules. High-speed interconnection traces have been designed and simulated with electromagnetic simulation software. Steady-state thermal characteristics of the transceiver module have been evaluated by ANSYS APLD based on finite-element methodology (FEM). Heat sinks are placed at the hotspot area to ensure the reliability of all working chips. Finally, this transceiver system based on silicon photonics is measured, and the eye diagrams of data and clock signals are verified.     

Convergence Rate of Solutions to a Hyperbolic Equation with $p(x)$-Laplacian Operator and Non-Autonomous Damping

This paper concerns the convergence rate of solutions to a hyperbolic equation with $p(x)$-Laplacian operator and non-autonomous damping. We apply the Faedo-Galerkin method to establish the existence of global solutions, and then use some ideas from the study of second order dynamical system to get the strong convergence relationship between the global solutions and the steady solution. Some differential inequality arguments and a new Lyapunov functional are proved to show the explicit convergence rate of the trajectories.     

Penning collisions of laser-cooled metastable helium atoms

We present experimental results on the two-body loss rates in a magneto-optical trap of metastable helium atoms. Absolute rates are measured in a systematic way for several laser detunings ranging from -5 to -30 MHz and at different intensities, by monitoring the decay of the trap fluorescence. The dependence of the two-body loss rate coefficient β on the excited state ( 2³ P ₂) and metastable state ( 2³ S ₁) populations is also investigated. From these results we infer a rather uniform rate constant K _sp = (1±0.4)×10^-7 cm³/s. Received 8 September 2000 and Received in final form 19 December 2000     

Fabrication of MgO nanobelts using a halide source and their structural characterization

MgO nanobelts have been fabricated by chemical vapor deposition using MgCl₃ as starting material. The products consist of a large quantity of belt-like nanostructures with typical lengths in the range of several tens to several hundreds of micrometers; some of them even have lengths on the order of a millimeter. The typical thickness and width-to-thickness ratio of the MgO nanobelts are in the range of 20 to 100 nm and about 5 to 10, respectively. The size and morphology of the MgO nanobelts were measured by transmission electron microscopy. Investigations of X-ray diffraction patterns and using high-resolution transmission electron microscopy indicate that the nanobelts have a cubic structure and are single-crystalline. Received: 23 August 2001 / Accepted: 27 August 2001 / Published online: 2 October 2001     

Effective nucleon-nucleon interactions and nuclear matter equation of state

Nuclear matter equations of state based on Skyrme, Myers-Swiatecki and Tondeur interactions are written as polynomials of the cubic root of density, with coefficients that are functions of the relative neutron excess δ. In the extrapolation toward states far away from the standard one, it is shown that the asymmetry dependence of the critical point ( ,) depends on the model used. However, when the equations of state are fitted to the same standard state, the value of is almost the same in Skyrme and in Myers-Swiatecki interactions, while is much lower in Tondeur interaction. Furthermore, does not depend sensitively on the choice of the parameter γ in Skyrme interaction. Received: 5 May 2000 / Accepted: 16 January 2001     

差分光学吸收光谱(DOAS)技术在烟气SO2监测中的应用

本文将差分光学吸收光谱(Differential Optical Absorption Spectroscopy,DOAS)技术中的浓度反演方法运用到烟气SO₂监测中.利用SO₂分子在300nm附近具有强吸收的特性,测量出烟气SO₂的吸收光谱,用DOAS方法反演出SO₂分子的浓度,消除了烟气中烟尘、水汽和其它成分的影响,使在线实时测量成为可能,在实验室内对几种SO₂分子浓度样气进行了测量和浓度反演.     

A segmentation-based and partial-volume-compensated method for an accurate measurement of lateral ventricular volumes on T(1)-weighted magnetic resonance images

Lateral ventricular volumes based on segmented brain MR images can be significantly underestimated if partial volume effects are not considered. This is because a group of voxels in the neighborhood of lateral ventricles is often mis-classified as gray matter voxels due to partial volume effects. This group of voxels is actually a mixture of ventricular cerebro-spinal fluid and the white matter and therefore, a portion of it should be included as part of the lateral ventricular structure. In this note, we describe an automated method for the measurement of lateral ventricular volumes on segmented brain MR images. Image segmentation was carried in combination of intensity correction and thresholding. The method is featured with a procedure for addressing mis-classified voxels in the surrounding of lateral ventricles. A detailed analysis showed that lateral ventricular volumes could be underestimated by 10 to 30% depending upon the size of the lateral ventricular structure, if mis-classified voxels were not included. Validation of the method was done through comparison with the averaged manually traced volumes. Finally, the merit of the method is demonstrated in the evaluation of the rate of lateral ventricular enlargement.