Studies of the reaction mechanism between copper(II) sulphate and excess copper(I) sulphide

The reaction process between CuSO₄ and excess Cu₂S in the temperature range 650–750 K was investigated by methods of thermal analysis and by studying the phase contentss of the products as a function of the fractional conversion. The reaction proceeds in three steps, with Cu₂S and a new phase described by the formula Cu₂SO₂ as intermediates. This new phase is liquid under the conditions of the reaction. The final product of the reaction is a defective crystalline Cu₂O.

---

Zusammenfassung Der Verlauf der Reaktion zwischen CuSO₄ und überschüssigem Cu₂S im Temperaturbereich von 650–750 K wurde mittels thermoanalytischer Methoden und durch Ermittlung der Phasenzusammensetzung in AbhÄngigkeit von der Konversion untersucht. Die Reaktion verlÄuft in drei Schritten mit Cu₂S und einer neuen Phase der Zusammensetzung Cu₂SO₂ als Zwischenproduke. Die neue Phase ist unter den Reaktionsbedingungen eine Flüssigkeit. Endprodukt der Reaktion ist nicht völlig kristallines Cu₂O.

---

CuSO₄ Cu₂S 650–750 K . Cu₂S , Cu₂SO₂ . Cu₂O .

     

The role of quantum interference in determining transport properties of molecular bridges

An analytical approach to the electron transport phenomena in molecular devices is presented. The analyzed devices are composed of various molecular bridges attached to two semi-infinite electrodes. Molecular system is described within the tight-binding model, while the coupling to the electrodes is analyzed through the use of Newns-Anderson chemisorption theory. The current-voltage (I-V) characteristics are calculated through the integration of transmission function in the standard Landauer formulation. The essential question of quantum interference effect of electron waves is diseussed in three aspects: (i) the geometry of a molecular bridge, (ii) the presence of an external magnetic field and (iii) the location of chemical substituent.     

A comparison of two algorithms for warping of analytical signals

The alignment of analytical signals is an important preprocessing step when further analysis (e.g. PCA) requires the same lengths of all of them. Two techniques for alignment of profiles, namely dynamic time warping (DTW) and correlation optimized warping (COW) were tested and compared. The attention was focused on chromatographic and spectroscopic profiles. Simulated and two sets of real data were studied in this study.     

Vibrational features in inelastic electron tunneling spectra

A theoretical analysis of inelastic electron tunneling spectroscopy (IETS) experiments conducted on molecular junctions is presented, where the second derivative of the current with respect to voltage is usually plotted as a function of applied bias. Within the nonperturbative computational scheme, adequate for arbitrary parameters of the model, we consider the virtual conduction process in the off-resonance region. Here we study the influence of few crucial factors on the IETS spectra: the strength of the vibronic coupling, the phonon energy, and the device working temperature. It was also shown that weak asymmetry in the IETS signal with respect to bias polarity is obtained as a result of strongly asymmetric connection with the electrodes.     

Fine tuning the structure of the Cu2+ complex with the prion protein chicken repeat by proline isomerization

The interaction between the single hexarepeat unit of chicken prion protein [ChPrP(54-59)] and Cu(II) was investigated by NMR, finding different coordination modes for the trans/trans and cis/trans isomers.     

Kinetics of particle deposition in the oblique impinging jet cell

A new oblique impinging-jet (OBIJ) cell was developed, suitable for colloid deposition studies at various interfaces. In contrast to previously used orthogonal cells, the OBIJ construction makes possible direct microscope observations of particle deposition on nontransparent substrates. The cell performance was tested by studying kinetics of polystyrene latex particle deposition on mica. Two limiting cell configuration were used in the experiments: (i) the lower position (inverted microscope observation of substrate surface through air) and (ii) the upper position (observation of the substrate surface with adsorbed particles through the suspension layer). The dependence of local mass transfer rate (particle flux) on the position over the substrate surface was studied for various flow Reynolds numbers. It was demonstrated that deposition rate attained maximum at the flow stagnation point whose position was dependent on Re number. Moreover, it was shown that the local flux decreased at much slower rate when moving in the downstream direction, than for previously used impinging-jet cells. Consequently, the area of uniform transport conditions was larger, enabling more precise determination of the limiting particle flux at the stagnation-point. The dependence of the flux on Re number was systematically studied for various ionic strength of the suspension. It was demonstrated, in accordance with previous results for the ordinary impinging-jet, that the flux increased significantly for low ionic strength and high Re number. This phenomenon, referred to as the inverse salt effect, was interpreted in terms of the convective diffusion theory. The governing transport equation originating from this theory was solved numerically, for the region near the stagnation point, using the finite-difference method. These numerical solutions were used for nonlinear fitting of the flow intensity parameter dependence on the Re number. In this way the flow field in the vicinity of the stagnation point was fully characterized. It was concluded that the new cell can be exploited as an effective experimental tool for colloid deposition studies on various substrates.     

Temperature-induced isomerization of violaxanthin in organic solvents and in light-harvesting complex II

Three main xanthophyll pigments are bound to the major photosynthetic pigment-protein complex of Photosystem II (LHCII): lutein, neoxanthin and violaxanthin. Chromatographic analysis of the xanthophyll fraction of LHCII reveals that lutein appears mainly in the all-trans conformation, neoxanthin in the 9'-cis conformation and major fraction of violaxanthin in the all-trans conformation. Nevertheless, a small fraction of violaxanthin appears always in a cis conformation: 9-cis and 13-cis (approximately 4% and 2% in the darkness, respectively). Illumination of the isolated complex (5 min, 445 nm, 250 micromolm-2s-1) results in the substantial increase in the concentration of the cis steric conformers of violaxanthin: up to 6% of 9-cis and 4% of 13-cis. Similar effect can be obtained by dark incubation of the same preparation for 30 min at 60 degrees C. Heating-induced isomerization of the all-trans violaxanthin can also be obtained in the organic solvent system but the formation of the 9-cis stereoisomer has not been observed under such conditions. The fact that the appearance of the 9-cis form of violaxanthin is specific for the protein environment suggests that violaxanthin may replace neoxanthin in LHCII in the N1 xanthophyll binding pocket and that the protein stabilizes this particular conformation. The analysis of the electronic absorption spectra of LHCII and the FTIR spectra of the protein in the Amid I band spectral region indicates that violaxanthin isomerization is associated with the disaggregation of the complex. It is postulated that this reorganization of LHCII provides conditions for desorption of violaxanthin from the pigment protein complexes, its diffusion within the thylakoid membrane and therefore, availability to the enzymatic deepoxidation within the xanthophyll cycle. It is also possible that violaxanthin isomerization plays the role of a security valve, by consuming an energy of excessive excitations in the antenna pigment network (in particular, exchanged at the triplet state levels).     

Complexes of heteroscorpionate trispyrazolylborate ligands. Part VI. Carboxylate induced conversion of mono-ligand Tp′M(L) into bis-ligand Tp′2M complexes (M=Co(II) and Cu(II))

A series of homoleptic complexes of hexacoordinate cobalt(II) and copper(II) complexes with 3,5-disubstituted homo- and heteroscorpionate tris(pyrazolyl)borate anionic ligands (Tp′) were synthesized, i.e. bis[hydrotris(3-phenyl,5-methylpyrazol-1-yl)borato]cobalt(II), bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]cobalt(II) and bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]copper(II) and their structures were elucidated crystallographically. The complexes were also formed spontaneously during attempted metathesis of the corresponding Tp′M(NCS) complexes into Tp′M(OOCCH(OH)CH₃) complexes. In the case of the analogous conversion applied for the thiocyanato [hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3,5-dimethylpyrazol-1-yl)boratocobalt(II) complex with sodium carboxylates (lactate, pyruvate and 2-hydroxybutyrate), the cross-transfer of pyrazolyl residues between starting anionic ligands was observed resulting in formation of bis-ligand homo- and heteroleptic Tp′CoTp″ complexes, where Tp′, Tp″ were tris(pyrazolyl)borates composed of n 3(5)-phenyl,5(3)-methylpyrazolyl and (3−n) 3,5-dimethylpyrazolyl residues (n=0–3) identified by mass spectrometry. Metathesis of thiocyanate in thiocyanato hydrotris(3-phenyl,5-methylpyrazol-1-yl)boratocobalt(II) into pyruvate led to the isolation of stable the pyruvato hydrotris(3-phenyl,5-methylpyrazol-1-yl)boratocobalt(II) complex, the structure of which was determined crystallographically. The Tp′ ligands are η³ coordinated to metal ions in every case, whereas the pyruvate anion is coordinated through carboxylate and carbonyl oxygen atoms to the cobalt center. Two rotational isomers distinguishable by ¹H NMR spectroscopy for the hexacoordinate bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]cobalt(II) complex were detected in solution.     

Dünnschicht-Chromatographie höherer Fettsäuren

Zusammenfassung Die Dünnschichtchromatographie von Fettsäuren wurde mit der Papierchromatographie solcher Säuren hinsichtlich ihrer Trennwirkung verglichen. Ein Verfahren zur quantitativen Bestimmung auf Dünn-schichten getrennter Fettsäuren wurde ausgearbeitet.

---

Summary The thin layer chromatography of fatty acids was compared with the paper chromatography of such acids with respect to their separation. A method was worked out for the quantitative determination of fatty acids separated on thin layers.

---

Résumé On compare la chromatographie en couche mince des acides gras avec celle sur papier, du point de vue de leur pouvoir de séparation. On a mis au point un procédé de dosage quantitatif des acides gras séparés sur couches minces.

     

Strychninium N‐phthaloyl‐β‐alaninate N‐phthaloyl‐β‐alanine and brucinium N‐phthaloyl‐β‐alaninate 5.67‐hydrate

Comparison of the structures of strychninium N‐phthaloyl‐β‐alaninate N‐phthaloyl‐β‐alanine, C₂₁H₂₃N₂O₂⁺·C₁₁H₈NO₄⁻·C₁₁H₉NO₄, and brucinium N‐phthaloyl‐β‐alaninate 5.67‐hydrate, C₂₃H₂₇N₂O₄⁺·C₁₁H₈NO₄⁻·5.67H₂O, reveals that, unlike strychninium cations, brucinium cations display a tendency to produce stacking inter­actions with cocrystallizing guests.