Amplified cathodic electrochemiluminescence of luminol based on zinc oxide nanoparticle modified Ni-foam electrode for ultrasensitive detection of amoxicillin

Journal of Solid State Electrochemistry - Here is reported a new feasible and facile method for the determination of amoxicillin by the electrochemiluminescence (ECL) method. The ECL signal was...     

Kinetic Behavior of Quaternary Ammonium Hydroxides in Mixed Methane and Carbon Dioxide Hydrates

This study evaluates the kinetic hydrate inhibition (KHI) performance of four quaternary ammonium hydroxides (QAH) on mixed CH₄ + CO₂ hydrate systems. The studied QAHs are; tetraethylammonium hydroxide (TEAOH), tetrabutylammonium hydroxide (TBAOH), tetramethylammonium hydroxide (TMAOH), and tetrapropylammonium hydroxide (TPrAOH). The test was performed in a high-pressure hydrate reactor at temperatures of 274.0 K and 277.0 K, and a concentration of 1 wt.% using the isochoric cooling method. The kinetics results suggest that all the QAHs potentially delayed mixed CH₄ + CO₂ hydrates formation due to their steric hindrance abilities. The presence of QAHs reduced hydrate formation risk than the conventional hydrate inhibitor, PVP, at higher subcooling conditions. The findings indicate that increasing QAHs alkyl chain lengths increase their kinetic hydrate inhibition efficacies due to better surface adsorption abilities. QAHs with longer chain lengths have lesser amounts of solute particles to prevent hydrate formation. The outcomes of this study contribute significantly to current efforts to control gas hydrate formation in offshore petroleum pipelines.     

A New Nanocomposite Based on Pt-rGO Embedded Polymelamine Formaldehyde Nanocomposite for Reduction of Carbon Dioxide

Here, polymelamine formaldehyde was decorated on the surface of reduced graphene oxide whose surface was then electrodeposited with a sub-monolayer of platinum nanoparticles. The nanocomposite thus prepared was characterized using several spectroscopic methods. Using the nanocomposite as a potential electrocatalyst for carbon dioxide reduction, the products were detected by Raman spectroscopy, gas chromatography, ¹³C-NMR spectroscopy, and gas chromatography-mass spectrometry. The analytical results identified methanol as the main product of CO₂ reduction. Moreover, analysis of the liquid products confirmed methanol as the predominant product with a current density of 0.4 mA/cm and a Faradaic efficiency of 93 %.     

A combined experimental and computational investigation of the binary mixtures of 2-methylcyclohexanol and isobutanol

Structural Chemistry - The measured densities and viscosities of the binary mixtures of the isobutanol and 2-methylcyclohexanol were reported experimentally in a certain range of concentrations at...     

Highly functionalized pyrazolines from symmetric and asymmetric 1,2-disulfonylhydrazines: a combination of experimental and DFT perspectives

Chemistry of Heterocyclic Compounds - In this work, new pyrazole derivatives were prepared by one-pot three-component reaction emloying symmetric and asymmetric 1,2-disulfonyl-hydrazines,...     

Effect of source strength on dislocation pileups in the presence of stress gradients

The behaviour of a dislocation pileup with a finite-strength source is investigated in the presence of various stress gradients within a continuum model where a free-dislocation region exists around the source. Expressions for dislocation density and stress field within the pileup are derived for the situation where there are first and second spatial gradients in applied stress. For a pileup configuration under an applied stress, yielding occurs when the force acting on the leading dislocations at the pileup tips reaches the obstacle strength, and at the same time, it is required that the source be at the threshold stress for dislocation production. A numerical methodology is presented to solve the underlying equations that represent the yielding conditions. The yield stress calculated for a pileup configuration is found to depend on stress gradients, obstacle spacing and source/obstacle strengths. It increases with increasing the first stress gradient, yet dependent on the second stress gradient. Furthermore, while the dependency of yield stress on the obstacle spacing intensifies with increasing the first stress gradient, it diminishes with an increase of second stress gradient. Therefore, the second stress gradient, as a newly introduced parameter, can provide a new physical insight into the size-dependent plasticity phenomena at small length scales.     

Synthesis and Characterization of H3PW12O40 and H3PMo12O40 Nanoparticles by a Simple Method

In this study H₃PW₁₂O₄₀·9H₂O and H₃PMo₁₂O₄₀·6H₂O (HPA) particles were changed into nano forms by heat-treatment in an autoclave as a simple, repaid, inexpensive and one step method. The particle size of these nanoparticles was around 25 nm. The as-synthesized nanostructures were characterized by dynamic light scattering, X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and inductively coupled plasma analyzer. Thermal stability of nanoparticles was surveyed by thermal gravimeter analyse. Acidity of prepared nanoparticles was investigated by pyridine adsorption method. Results showed rising acidity by declining particle size of HPA.     

The analysis of structural and electronic properties for assessment of intramolecular hydrogen bond (IMHB) interaction: a comprehensive study into the effect of substitution on intramolecular hydrogen bond of 4-nitropyridine-3-thiol in ground and electronic excited state

The hydrogen bond strength, molecular geometry, π-electron delocalization, and physical properties such as dipole moment, chemical potential, and chemical hardness of 4-nitropyridine-3-thiol and its 29 derivatives have been studied by means of density functional method with 6-311++G** basis set in gas phase and water solution. Also, the excited-state properties of intramolecular hydrogen bonding in these systems have been investigated theoretically using the time-dependent density functional theory method. The HOMA, NICS, PDI, ATI, FLU, and FLU_π indices as well-established aromaticity indicators have been examined. Natural bond orbital analysis is also performed for better understanding the nature of intramolecular interactions. The electron density and Laplacian (?² ρ) properties, estimated by AIM calculations, indicate that H···O bond possesses low ρ and positive ?² ρ values, which are in agreement with electrostatic character of the HBs, whereas S–H bond has covalent character. Numerous correlations between topological, geometrical, and energetic parameters are also found.     

Synthesis and properties of thermally stable polyimides bearing pendent fluorene moieties

A new diamine monomer containing fluorene unit, 3,5‐diamino‐N‐(9H‐fluoren‐2‐yl)benzamide was successfully synthesized via the condensation of 2‐aminofluorene and 3,5‐dinitrobenzoyl chloride and subsequent reduction of the dinitro compound. A series of novel aromatic polyimides having pendent fluorenamide moieties were prepared from the reaction of the diamine monomer and various tetracarboxylic dianhydrides by a conventional two‐step polymerization process. The polyimides were obtained in quantitative yields with inherent viscosities of 0.33–0.44 dl/g. The resulting polymers dissolved in N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The glass transition temperature of these polymers was in the range of 261–289°C. They were fairly stable up to a temperature around 450°C and lost 10% weight in the range of 498–556°C in nitrogen. The UV–vis absorption spectra showed that all of the polymers had absorption maxima around 320 nm. Cyclic voltammograms of the polyimides revealed an oxidation wave with a peak around 1.3 V. Copyright © 2014 John Wiley & Sons, Ltd.