Application of polyaniline as an efficient and novel adsorbent for azo dyes removal from textile wastewaters

In this work, application of polyaniline coated onto wood sawdust (PAni/SD) for the removal of methyl orange (MO) as a typical azo dye from aqueous solutions is introduced. The effects of some important parameters such as pH, initial concentration, sorbent dosage, and contact time on the uptake of MO solution were also investigated. In order to get a better comparison, adsorption experiments were also carried out using commercial grade of granulated activated carbon (GAC) and sawdust without coating (SD) at the same time. It was found that PAni/SD can be used to remove azo dyes such as MO from aqueous solutions very efficiently. Experimental data were analyzed by the Langmuir and Freundlich models of adsorption. Kinetic parameters for the adsorption of MO dyes for the selected adsorbents are also reported. In order to study the possibility of desorption for frequent application, chemical regeneration of the used adsorbents was also investigated. Desorption or recovery of dye and regeneration of adsorbent (PAni/SD) was found to be quite possible and of high performance. Application of modified sawdust with polyaniline for the removal of azo dye is very promising for textile wastewater treatment.     

A simple and reliable stir bar sorptive extraction-liquid chromatography procedure for the determination of chlorpromazine and trifluoperazine in human serum using experimental design methodology

A sensitive and reproducible stir bar sorptive extraction and HPLC-UV detection method was used for the therapeutic drug monitoring of chlorpromazine and trifluoperazine in human serum. The separation was achieved using a C(18) column. The mobile phase consisted of methanol/sodium acetate buffer (pH 4.1; 0.1 M) (95:5, v/v) including 0.5% triethylamine. This miniaturized method can result in faster analysis, lower solvent consumption and less workload per sample while maintaining or even improving sensitivity. In the second part, stir bar sorptive extraction/HPLC-UV method was optimized by a chemometrics approach. An experimental design was therefore used to evaluate the statistically influential and/or interacting factors, among those described in the literature, and to find the best extraction and desorption conditions. Optimal sample volume of 1 mL, extraction time of 24 min at 31°C with pH 8.1 were obtained in a screening 2(5) half fractional factorial design followed by a Box-Behnken design. For the desorption conditions, a Box-Behnken design showed that the best conditions were 150 μL mobile phase for 20 min at 50°C. The optimized method was repeatable (CV<10%, linear (LOQ-500 ng/mL)), with the LOQs equal to 0.7 and 1.5 ng/mL for chlorpromazine and trifluoperazine, respectively.     

Analysis of testosterone in human urine using molecularly imprinted solid-phase extraction and corona discharge ion mobility spectrometry

Analysis of testosterone was accomplished using corona discharge ion mobility spectrometry. Molecular imprinted polymer was used for the extraction and pre-concentration of testosterone. Analytical parameters including precision, dynamic range and detection limit were obtained. The linear dynamic range was from 10 to 250 ng/mL and the limit of detection was 0.9 ng/mL. The proposed method was used for analysis of testosterone in urine samples. A urine sample from a 3-year-old girl was used as the blank. The RSD was below 10%. The obtained results from the method were also compared with the standard method for analysis of testosterone using SPE-HPLC analysis. The results demonstrate the accuracy of the method.     

Synthesis and characterization of N‐substituted polyaniline with mesogen molecules

The N‐substituted polyaniline (PANi) was synthesized by incorporation of bromine‐terminated mesogens onto the emeraldine form of polyaniline. Firsty three liquid crystalline molecules containing biphenyl units were synthesized. These mesogenic molecules are named as: 6‐bromo‐ (4‐hexyloxy‐biphenyl‐4′‐oxy) hexane (C₆? C₆Br), 5‐bromo‐(4‐hexyloxy‐biphenyl‐4′‐oxy) pentane (C₆? C₅Br), 6‐bromo‐(4‐octyloxy‐biphenyl‐4′‐oxy) hexane (C₈? C₆Br). Differential scanning calorimetry (DSC) in combination with polarizing optical microscopy (POM) were used to investigate the thermal properties of them. Optical microscopy showed focal conic texture characteristic of the Smectic A phase for (C₆? C₅Br) and (C₈? C₆Br). For (C₆? C₆? Br) smectic phase was determined. DSC experiments were also found in accord with mesophase formation. For the synthesis of N‐substituted polyaniline with these mesogen molecules, the emeraldine base polyaniline was reacted with BuLi to produce the N‐anionic polyaniline and then deprotonated polyaniline was reacted with bromine‐end mesogen to prepare mesogen‐substituted polyaniline through N‐substitution reaction. The degree of N‐substitution can be controlled by adjusting the molar feed ratio of mesogen to the number of repeat units of PANi. The microstructure and compositions of obtained polymers were characterized by FT‐IR, elemental analysis, DSC, and scanning electron microscopy (SEM). The cyclicvoltammetry show that the electroactivity of N‐substituted polyaniline is strongly dependent on the degree of N‐grafting. The solubility of mesogen‐substituted polyaniline in common organic solvents such as THF and chloroform was improved by increasing the degree of N‐substitution and also the samples are partially soluble in xylene. Liquid crystalline behavior of mesogen‐substituted polyanilines was investigated via POM, but no mesophase was observed. Copyright © 2008 John Wiley & Sons, Ltd.     

Ionic liquid-based dispersive liquid–liquid microextraction for the separation and preconcentration of lead in water samples prior to FAAS determination without chelating agent

In the present study, an environment-friendly sample preparation method termed ionic liquid-based dispersive liquid–liquid microextraction combined with flame atomic absorption spectrometry has been developed for the determination of Pb(II) ion in water samples prior to flame atomic absorption spectrometry determination. In this method, ionic liquid was used as an extraction solvent instead of the organic solvent used in the conventional dispersive liquid–liquid microextraction (DLLME) assay, and there is no need for a chelating agent. Several variables that may affect extraction efficiencies, including pH, the volume of ionic liquid, the type and volume of disperser solvent, salt addition, and the time for centrifugation and extraction were studied and optimised. Under the optimised conditions, the calibration curve exhibited linearity over the range of 20.0–1000.0 μg L^?1. The enrichment factor and the limit of detection based on 3S_b/m were 35.0 and 5.9 μg L^?1, respectively. Seven replicate determination of a solution containing of 100.0 μg L^?1 Pb(II) ions gave a relative standard deviation of ±2.1%. Finally, the feasibility of the proposed method for Pb(II) determination was assessed by the analysis of certi?ed reference material and various water samples and the satisfactory results were obtained.     

Ti(IV) ion-imprinted polymer as a new selective sorbent for extraction and pre-concentration of trace amounts of titanium ions in different samples

ABSTRACT

In this paper, a novel, simple, selective and effective solid phase extraction method based on ion-imprinted polymer (IIP) technology and flame atomic absorption spectrometry (FAAS) for separation and pre-concentration of trace amounts of titanium (IV) ions was reportd?. It was obtained by precipitation polymerisation by using 2-(2,4-dihydroxyphenyl)-3,5,7-trihydroxychromen-4-one titanium (IV) complex abbrivated as Ti(IV)-(morin), as the template molecule. After polymerisation, leaching the polymer in HNO₃ (50% (v/v) solution caused formation cavities in the polymer. Characterisation studies of the ?Ti(IV)-imprinted polymer (Ti-IP) was performed by FT-IR, UV-Vis and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS) techniques and then, the effective factors on extraction were optimised. A sensitive response to Ti(IV) within a concentration range between 0.01 and 4.0 μg mL^?1 was achieved under the optimum conditions. A total of 10.0 ng mL^?1 and 80.0 mg g^?1 were obtained as limit of detection (LOD, 3Sb/m) and maximum adsorption capacity, respectively. The relative standard deviation (RSD) for eight replicates detections of 0.2 μg mL^?1 of Ti(IV)? was found to be 2.8%. By this method, pre-concentration factor (PF) of 100 was obtained. Successfully applying this method in the water and standard samples, reasonable results were obtained for the extraction and pre-concentration of the titanium ions.     

Immobilization of cytochrome c on polyaniline/polypyrrole/carboxylated multi-walled carbon nanotube/glassy carbon electrode: biosensor fabrication

Journal of Solid State Electrochemistry - A modified electrode PAN/PPY/cMWCNTs composed of polyaniline/polypyrrole (PAN/PPY) bilayer conducting polymer film, carboxylated multi-walled carbon...     

Structural diversity of metallacycle intermediates for ethylene dimerization on heterogeneous NiMCM-41 catalyst: a quantum chemical perspective

Structural Chemistry - Nanocluster models were investigated to explore the diversity of metallacycle intermediates for ethylene dimerization over NiMCM-41 at B3LYP/6-311+G* and M06/Def2-TZVP. The...     

A Review on Bioengineering Approaches to Insulin Delivery: A Pharmaceutical and Engineering Perspective

Diabetes mellitus (DM) is the most prevalent non‐contagious disease, which has affected a large number of people all over the world. Among all treatments known to have a positive influence in the control of DM, insulin therapy is the most common and effective one. Nowadays, various methods of insulin delivery are under investigation, which are able to reach a plausible bioavailability with ignorable side effects instead of insulin injection. This article presents a comprehensive review of the insulin therapy approach with a focus on modified methods in insulin delivery strategies and current advances in engineered insulin delivery systems.