A review on green Lewis acids: zirconium(IV) oxydichloride octahydrate (ZrOCl<Subscript>2</Subscript>·8H<Subscript>2</Subscript>O) and zirconium(IV) tetrachloride (ZrCl<Subscript>4</Subscript>) in organic chemistry

Lewis acids are important and interesting catalysts in most organic transformations. Among different Lewis acids, Zr(IV) species such as ZrCl₄ and ZrOCl₂·8H₂O are allocated special attention because of their low toxicity, availability and handling, moisture stability, and low cost in comparison to some of their corresponding compounds. During recent decades, Lewis acids have been used to promote different types of organic reactions because they naturally possess mild acidity properties and, as such, can catalyze reactions selectively. This means that in the presence of various functional groups, they can operate on a specific group to produce the objective product. In this review we have focused on the reactions which have been progressed in the presence of ZrCl₄ and ZrOCl₂·8H₂O. The study has been ordered based on the number of the reaction components and their solvent media.     

Synthesis of L-tyrosine-capped ZnSe quantum dots and its application to hypochlorite determination in water

In this study, a new sensitised spectrofluorometric method was presented as a probe sensor for hypochlorite analysis in oral and tap water samples. By capping L-tyrosine (Tyr) on ZnSe nanoparticles, stable quantum dots (QDs) were obtained. In comparison with Tyr, the fluorescence (FL) emission of Tyr-capped ZnSe is enhanced and shifted to greater wavelength, which causes to enhance the sensitivity for the determination of hypochlorite. Based on the FL quenching of the Tyr-capped ZnSe QDs, hypochlorite concentration was detected at buffering pH of 7 in the range of 5.15 × 10^?5?2.57 × 10^?2 g L^?1. Relative standard deviation and detection limit were found to be 0.83% and 2.06 × 10^?5 g L^?1, respectively. In comparison with the other methods of hypochlorite determination, this method is simple, fast and inexpensive, with low sample volume consumption. It also exhibits a good selectivity.     

NC Palladacycles and C,C-chelating phosphorus ylide complexes: synthesis,X-ray characterization,and comparison of the catalytic activity in the Suzuki-Miyaura reaction

Six secondary amine palladacycles bearing monodentate ligands (1a, 2a), 1,2-bis(diphenylphosphino)ethane (dppe) and 1,3-bis(diphenylphosphino)propane (dppp) containing bridging and bidentate ligands (1b, 2b–d), and four C,C-type phosphorus ylide complexes containing thiourea (tu) (3a), phenyl isothiocyanate (4a), and bridging and terminal azide groups (5 and 5a) have been synthesized. Resulting complexes have been characterized by elemental analyses, IR, ¹H-, ¹³C{¹H}-, and ³¹P{¹H}-NMR spectroscopy with single crystal X-ray structure determination of 1a and 2a. The Pd in 1a and 2a occupies the center of a slightly distorted square planar environment formed by C_aryl, N_amine, N_pyridine, and Cl. The catalytic efficiency of complexes showed that in most cases, amine palladacycles display better catalytic activities than the phosphorus ylide Pd(II) complexes. Comparison between bidentate and bridging dppe complexes showed that dppe-bridged dimer 2d has higher catalytic activity than dppe bidentate complex.     

Construction of a biointerface for glucose oxidase through diazonium chemistry and electrostatic self-assembly technique

In this study, a new procedure for the fabrication of biosensors was developed. The method is based on the covalent attachment of nitrophenyl groups to the electrode surface via diazonium salt reaction followed by their conversion to amine moieties through electrochemical reduction and electrostatic layer-by-layer (LbL) assembly technique. In this procedure, highly stable iron oxide (Fe₃O₄) nanoparticles (IONPs), chitosan (CHIt), GOx, and Nile blue (NB) were assembled on the surface of aminophenyl modified glassy carbon electrode (AP/GCE) by LbL assembly technique. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the interfaces. The surface coverage of the active GOx and Michaelis–Menten constant (K _M) of the immobilized GOx were Γ?=?3.38?×?10^?11 mol cm^?2 and 2.54 mM, respectively. The developed biosensor displayed a well-defined amperometric response for glucose determination with high sensitivity (8.07 μA mM^?1) and low limit of detection (LOD) of 19.0 μM. The proposed approach allows simple biointerface regeneration by increasing pH which causes disruption of the ionic interactions and release of the electrostatic attached layers. The biosensor can then be reconstructed again using fresh enzyme. Simple preparation, good chemical and mechanical stabilities, and easy surface renewal are remarkable advantages of the proposed biosensor fabrication procedure.     

<Emphasis Type="Italic">Stachys lavandulifolia</Emphasis> and <Emphasis Type="Italic">Lathyrus</Emphasis> sp. Mediated for Green Synthesis of Silver Nanoparticles and Evaluation Its Antifungal Activity Against <Emphasis Type="Italic">Dothiorella sarmentorum</Emphasis>

In this study, silver nanoparticles (AgNPs) were biosynthesized using Stachys lavandulifolia and Lathyrus sp. The first sign of the reduction of silver ions to AgNPs was the change in color of S. lavandulifolia and Lathyrus sp. extracts changed into dark brown and auburn after treating with silver nitrate, respectively. The UV–Vis spectroscopy of reaction mixture (extract+silver nitrate) produced by S. lavandulifolia and Lathyrus sp. showed the strong adsorption peaks at ?440 and 420 nm, respectively. The transmission electron microscope images showed the synthesis of AgNPs using S. lavandulifolia and Lathyrus sp. with an average size of 7 and 11 nm, respectively. The result of X-ray diffraction pattern showed four diffraction peaks at 38°, 44°, 64°, and 77° for both types of biosynthesized AgNPs. Fourier transform infrared spectroscopy showed the possible role of involved proteins and polyhydroxyl functional groups in the synthesis process of AgNPs. Inductively coupled plasma analysis determined the conversion rate (percentage) of silver ions to silver nanoparticles in reaction mixtures of S. lavandulifolia and Lathyrus sp. 99.73 and 99.67 %, respectively. In addition, antifungal effect of AgNPs, synthesized by both extracts, was studied separately on mycelial growth of Dothiorella sarmentorum, in a completely randomized design on potato dextrose agar (PDA) medium. The inhibition rate of mycelial growth was strongly depended on the density of AgNPs and it strongly increased with increasing the density of AgNPs in the PDA medium. AgNPs more than 90 % of them inhibited from the mycelia growth of the fungus at the concentration of 40 µg/mL and higher.     

Evaluation of chemical constitute,fatty acids and antioxidant activity of the fruit and seed of sea buckthorn (Hippophae rhamnoides L.) grown wild in Iran

In this investigation, the chemical compositions of berries from sea buckthorn were studied. The amount of ascorbic acid and β-carotene determined by HPLC was 170 mg/100 g FW and 0.20 mg/g FW, respectively. Total phenols, anthocyanins, acidity and total soluble solids (TSS) contents were 247 mg GAE/100 g FW, 3 mg/L (cyanidin-3-glucoside), 5.32% and 13.8%, respectively. Fruit antioxidant activity determined by the ferric reducing ability of plasma (FRAP) method was 24.85 mM Fe/100 g FW. Results confirmed the presence of six dominant fatty acids (determined by GC) in fruit including linoleic (34.2%), palmitoleic (21.37%), palmitic (17.2%), oleic (12.8%), linolenic (5.37%) and stearic acid (1.67%). Five dominant fatty acids of the seeds were linoleic (42.36%), linolenic (21.27%), oleic (21.34%), palmitic (6.54%) and stearic acid (2.54%). The nitrogen content was 3.96%. The P, K, Ca, Mg, Fe, Zn, Mn, Cu, Cd and Cl contents of fruit were 491, 1674, 1290, 990, 291, 29.77, 108.37, 17.87, 0.021 and 2.18 mg/kg DW, respectively.     

Effect of exposure parameters on cavitation induced by low-level dual-frequency ultrasound

In order to quantify the effects of exposure parameters under therapeutic conditions such as sonodynamic therapy, it is necessary initially to evaluate the inertial cavitation activity in vitro. In this study, the dependence of cavitation activity induced by the low-level dual-frequency ultrasound irradiation on exposure parameters has been studied. Experiments were performed in the near 150 kHz and 1 MHz fields in the progressive wave mode. It has been shown that at constant ultrasound energy the fluorescence intensity for continuous sonication is higher than for pulsed mode. With increasing the duty cycle of pulsed field, the inertial cavitation activity is increased. The activity of cavitation produced by simultaneous combined sonication by two ultrasound fields is remarkably higher than the algebraic sum of effects produced by fields separately (p-value < 0.05). This study shows that simultaneous combined dual-frequency ultrasound sonication in continuous mode is more effective in producing inertial cavitation activity at low-level intensity. Therefore, it is concluded that investigations in this combined ultrasound sonication can be useful in sonodynamic therapy for superficial tumors.     

Synthesis and characterization of N‐substituted polyaniline with mesogen molecules

The N‐substituted polyaniline (PANi) was synthesized by incorporation of bromine‐terminated mesogens onto the emeraldine form of polyaniline. Firsty three liquid crystalline molecules containing biphenyl units were synthesized. These mesogenic molecules are named as: 6‐bromo‐ (4‐hexyloxy‐biphenyl‐4′‐oxy) hexane (C₆? C₆Br), 5‐bromo‐(4‐hexyloxy‐biphenyl‐4′‐oxy) pentane (C₆? C₅Br), 6‐bromo‐(4‐octyloxy‐biphenyl‐4′‐oxy) hexane (C₈? C₆Br). Differential scanning calorimetry (DSC) in combination with polarizing optical microscopy (POM) were used to investigate the thermal properties of them. Optical microscopy showed focal conic texture characteristic of the Smectic A phase for (C₆? C₅Br) and (C₈? C₆Br). For (C₆? C₆? Br) smectic phase was determined. DSC experiments were also found in accord with mesophase formation. For the synthesis of N‐substituted polyaniline with these mesogen molecules, the emeraldine base polyaniline was reacted with BuLi to produce the N‐anionic polyaniline and then deprotonated polyaniline was reacted with bromine‐end mesogen to prepare mesogen‐substituted polyaniline through N‐substitution reaction. The degree of N‐substitution can be controlled by adjusting the molar feed ratio of mesogen to the number of repeat units of PANi. The microstructure and compositions of obtained polymers were characterized by FT‐IR, elemental analysis, DSC, and scanning electron microscopy (SEM). The cyclicvoltammetry show that the electroactivity of N‐substituted polyaniline is strongly dependent on the degree of N‐grafting. The solubility of mesogen‐substituted polyaniline in common organic solvents such as THF and chloroform was improved by increasing the degree of N‐substitution and also the samples are partially soluble in xylene. Liquid crystalline behavior of mesogen‐substituted polyanilines was investigated via POM, but no mesophase was observed. Copyright © 2008 John Wiley & Sons, Ltd.     

Furanose dynamics in the HhaI methyltransferase target DNA studied by solution and solid-state NMR relaxation

Both solid-state and solution NMR relaxation measurements are routinely used to quantify the internal dynamics of biomolecules, but in very few cases have these two techniques been applied to the same system, and even fewer attempts have been made so far to describe the results obtained through these two methods through a common theoretical framework. We have previously collected both solution 13C and solid-state 2H relaxation measurements for multiple nuclei within the furanose rings of several nucleotides of the DNA sequence recognized by HhaI methyltransferase. The data demonstrated that the furanose rings within the GCGC recognition sequence are very flexible, with the furanose rings of the cytidine, which is the methylation target, experiencing the most extensive motions. To interpret these experimental results quantitatively, we have developed a dynamic model of furanose rings based on the analysis of solid-state 2H line shapes. The motions are modeled by treating bond reorientations as Brownian excursions within a restoring potential. By applying this model, we are able to reproduce the rates of 2H spin-lattice relaxation in the solid and 13C spin-lattice relaxation in solution using comparable restoring force constants and internal diffusion coefficients. As expected, the 13C relaxation rates in solution are less sensitive to motions that are slower than overall molecular tumbling than to the details of global molecular reorientation, but are somewhat more sensitive to motions in the immediate region of the Larmor frequency. Thus, we conclude that the local internal motions of this DNA oligomer in solution and in the hydrated solid state are virtually the same, and we validate an approach to the conjoint analysis of solution and solid-state NMR relaxation and line shapes data, with wide applicability to many biophysical problems.     

Applications of Non-precious Transition Metal Oxide Nanoparticles in Electrochemistry

Non-precious transition metal oxide nanomaterials offer numerous opportunities for various cost-effective electrochemical applications. This review article features the design and advancement of such nanomaterials with unique features applied for the fabrication of electrochemical devices. Also, it discusses various new syntheses of transition metal oxide nanoparticles (TMO NPs) via multiple chemicophysical and biological procedures. Further, the novel appliances of the TMO NPs with varying sizes and morphologies are appraised. The advantages and challenges of a number of investigations on the TMO NPs towards electrochemical applications are addressed with their standpoint of cost-effectiveness, applicability, and the efficiency of the introduced nanostructures for the industrial applications.