Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Synthesis of Two Schiff Base Transition Metal Complexes Bearing Morpholine Side Chains and Kinetics of PNPP Catalytic Hydrolysis in Brij35 Micelle

Two Schiff base transitional metal complexes bearing morpholine side chains were synthesized and characterized, and were used as a simulative hydrolase in the catalytic hydrolysis of p‐nitrophenyl picolinate (PNPP) in this article. A mechanism of PNPP catalytic hydrolysis in the Brij35 micellar solution was proposed and supported by the results of the spectral analysis and the kinetic calculation. The kinetic model of PNPP catalytic hydrolysis was studied. The some kinetic and the thermodynamic constants on the catalytic reaction were calculated. The results of the study show that the metallomicelle made up of the Schiff base transitional metal complexes and Brij35 micelle revealed a good catalytic activity in PNPP catalytic hydrolysis; the rate of the PNPP catalytic hydrolysis is increased following the increase of the pH values in the buffer solution and affected by the polarization action of metal ion of complex.     

Synthesis and characterization of fluorine-containing cholesteric liquid crystalline polysiloxanes bearing trifluoromethyl-substituted mesogens

A series of side-chain liquid crystal (LC) polysiloxanes were synthesised with Poly(methylhydrogeno)siloxane, 4?-(undec-10-enoyloxy) biphenyl – 4 – yl 4- (trifluoromethyl) benzoate (M_th) and a chiral nematic (N*) LC monomer 1-allyl 10-(cholesteryl)-decanedioate (M_ch). The chemical structures and LC properties of the monomers and polymers were characterised by FTIR, ¹H-NMR, differential scanning calorimetry, thermogravimetric analysis, POM and X-ray diffractometer. M_ch is monotropic N* LC. The homopolymer derived from monomer M_ch is enantiotropic N* LC. Monomer M_th is a smectic A liquid crystal. The copolymers derived from M_ch and M_th are N* LCs. The temperatures at which 5% weight loss occurred are greater than 300°C for all the fluoro-containing polymers, and the residue weights of the samples at 600°C increased slightly as the content of trifluoromethyl mesogens increased in the polymers. The glass transition temperatures of the polymers increased as trifluoromethyl mesogens increased, too. The N*–I phase transition temperatures show a negative deviate from ideal or linear behaviour. The values of the enthalpy changes for the cholesteryl containing polymers are rather low and this is attributed to the biaxiality of cholesteryl moiety which tends to reduce the change in the orientational order at the N*–I transition. Compared to the monomers, the polymers show wider mesophase region.     

[Cu(C8H4F3O2S)2(C12H8N2)]·C3H6O的合成及其晶体结构

标题配合物 [Cu(C8H4 F3O2 S) 2 (C12 H8N2 ) ]·C3H6 O属于三斜晶系 ,空间群为P1,并测得如下晶胞参数a =10 .5 77(3) ,b =15 .72 2 (4) ,c =10 .133(2 ) ,α =94 .5 3(2 ) ,β =10 0 .81(2 ) ,γ =96 .18(2 )° ,V =16 37.0 3 3,Z =2 ,Mr =74 4.18,Dx =1.5 1× 10 6 g·m- 3,F(0 0 0 ) =5 2 6 ,μ =8 2 4cm- 1,最终偏差因子为R =0 .0 83,Rw=0 .0 74。Cu(II)与 2个 4 ,4 ,4 三氟 1 (2 噻吩基 )丁二酮 1,3中的四个氧原子和菲咯啉中的两个氮原子 ,组成了一个畸变的八面体构型。     

论测量不确定度

讨论了测量不确定度的基本概念及应用。分析了误差和不确定度两个概念的区别，探讨了不确定度及分量的评定方法。     

分子印迹手性整体柱的制备及对非对映异构体的分离

 采用原位分子印迹技术 ,单步制备了一种辛可宁印迹的手性整体柱。为了提高柱效和选择性 ,选择了相对低极性的甲苯 /十二醇复合致孔体系。在等度及梯度洗脱条件下 ,非对映异构体辛可宁与辛可尼丁被完全分离。等度洗脱中相对较宽的峰可以在梯度洗脱中得到改善。同时考察了流动相中醋酸浓度、流速以及温度对分离的影响。由于柱中存在大的流通孔 ,大大降低了分离过程中的柱压降 ,从而使这种柱能够在相对高的流速下使用。提高温度可以提高分离因子 ,在 60℃获得最大分离因子 5 40。     

环四甲撑四硝胺(HMX)结构和性质的DFT研究

用密度泛函理论(DFT)B3LYP方法,取6-31G基组,求得环四甲撑四硝胺分子的几何构型、电子结构、 IR谱和298～1200 K的热力学性质.全优化几何构型和电子结构均具有Ci对称性.在相邻原子之间以N-NO2键的Mulliken集居数最小,表明其间电子分布较少,预示其为热解和起爆的引发键.IR谱与实验结果良好相符.     

环五甲撑五硝胺(CRX)结构和性质的DFT预示

用密度泛函理论(DFT)B3LYP方法,在6-31G*基组水平下,全优化计算了环五甲撑五硝胺(CRX)的分子几何和优化构型下的电子结构.环C-N键长为0.144～0.148 nm, N-NO2键长为0.139～0.142 nm; CRX的最高占有MO(HOMO)能级和最低未占MO(LUMO)能级之间的差值ΔEg(5.2054 eV)较大,预示CRX较稳定.基于简谐振动分析求得IR谱频率和强度.运用统计热力学方法,求得在200～1200 K的热力学性质C0p,m、 S0m和H0m.还运用Kamlet公式预示了它的爆速和爆压分别为9169 m/s和37.88 GPa.     

Quantitative analysis of estrogens in human urine using gas chromatography/negative chemical ionisation mass spectrometry

A sensitive procedure for the determination of estrogens in urine has been developed, using enzymatic hydrolysis and ether extraction followed by capillary gas chromatography with negative chemical ionisation mass spectrometry (GC/NCI-MS) of the pentafluorobenzoyl derivatives. These derivatives were superior for GC/NCI-MS to trifluoroacetyl, heptafluorobutyl, pentadecafluorooctanoyl and perfluorotolyl derivatives, giving characteristic negative molecular ions as the base peak for each of the naturally occurring estrogens estrone, estradiol and estriol, and for the synthetic estrogen ethynylestradiol used in contraceptive pills. The method was also suitable for determination of some metabolites of estrone and estradiol. The specificity and sensitivity of the GC/NCI-MS method simplifies sample preparation. Recovery of spiked samples was in the range 84-101% for the natural estrogens based on additions to increase the concentration by 5 and 1 microg L(-1). The repeatability of the method was 1-8% for all estrogens.