Mechanically strong and stiff supramolecular polymers enabled by fiber reinforced long-chain alkane matrix

Fiber-reinforced-concrete (FRC) mechanism refers short discrete fibers that are uniformly distributed and randomly oriented, which offers an effective way to improve the mechanical performance of concrete. In the design of supramolecular polymers, an analogous concept of FRC appears to have been considered very rarely-although fibrous structure has been frequently observed/generated during the supramolecular polymerization. In this work, we apply the alkane thermosets, octadecane (C₁₈H₃₈) and tetracosane (C₂₄H₅₀), taking the role of “concrete”, and the low-molecular-weight monomer with long alkyl chains as the essential “fiber” component, to fabricate the “fiber reinforced supramolecular polymer”. Very much like FRC mechanism in material science, the resulting fiber reinforced supramolecular polymer thus exhibit unusually high mechanical strength and stiffness, which is unprecedented in the conventional supramolecular strategy.     

Luminescence Switching of Organogold(I) Complexes between Aggregation-induced Phosphorescence Enhancement and Aggregation-caused Quenching by Balancing Auxiliary Ligands around the AuI Center

Attaching AIE-active L1 ([1,1′:2′,1′′:4′′,1′′′-quaterphenyl]-2-yldiphenylphosphane) to AuCl, shortened the distances of P−C bonds to promote electron cloud overlap between Au^I and L1 , affords 1 ( L1 AuCl) with aggregation-induced phosphorescence enhancement (AIPE) activity by ³LMCT transitions. Then substituting the coplanar L2 (9-ethynylanthracene) for the Cl⁻ in 1 providing 2 , switches the luminescence to aggregation-caused quenching (ACQ) activity. Furthermore, we restore the performance from ACQ to AIPE by metathesis reactions to transfer 2 into 1 . It is versatile synthetic strategy of reversible transformation between 1 and 2 that switches the luminescence of organogold(I) between AIPE and ACQ through balancing auxiliary ligands around the given metal.     

Dependence of dielectric,ferroelectric, and piezoelectric properties on crystalline properties of p(VDF‐co‐TrFE) copolymers

Thermal processing at various temperatures has been used to fabricate poly(vinylidene fluoride‐co‐trifluoroethylene) [P(VDF‐co‐TrFE)] films with varied crystalline properties in an attempt to improve their piezoelectric properties. Although the dielectric constant of the films annealed at higher temperature is smaller than that of cooled and quenched ones, it has been shown that the annealed films possess larger crystallinity and stacked lamellar crystal grain size. The ferroelectric domains deriving from crystal region in all the samples are effectively improved by hot polarization. As a result, the remnant polarizations (P_r) and coercive electric field (E_c) of the corresponding films are improved at a low frequency due to the response of dipoles in crystal phase, and the largest piezoelectric constant in the longitudinal thickness mode (d₃₃=?25 pC/N) is obtained in an annealed copolymer film. The results illustrate improving the crystal structure of P(VDF‐co‐TrFE) is an effective way to realize high electromechanical properties, which provides broadly applied scenery for this kind of copolymer in piezoelectric components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A Luminescent Metal–Organic Framework Thermometer with Intrinsic Dual Emission from Organic Lumophores

A new mixed‐ligand metal–organic framework (MOF), ZnATZ‐BTB, has been constructed as a luminescent ratiometric thermometer by making use of the intrinsic dual emission at cryogenic temperatures. Its twofold interpenetrated network promotes the Dexter energy transfer (DET) between the mixed organic lumophores. The temperature‐dependent luminescent behavior arises from the thermal equilibrium between two separated excited states coupled by DET, which is confirmed by Boltzmann distribution fitting. The small excited‐state energy gap allows ZnATZ‐BTB to measure and visualize cryogenic temperatures (30–130 K) with significantly high relative sensitivity (up to 5.29 % K^?1 at 30 K). Moreover, it is the first example of a ratiometric MOF thermometer the dual emitting sources of which are widely applicable mixed organic ligands, opening up new opportunities for designing such devices.     

平板折叠桌的设计模型

根据折叠桌的运动特征,选取折叠桌的四分之一为研究对象,建立任意角度下桌脚点的运动变化模型。考虑到产品稳固性、加工便利性和节约用材三方面对加工参数的影响,对折叠桌进行受力分析,得到多目标组合优化模型,用以确定出折叠桌的最优设计参数。针对用户提出的桌面形状要求,建立桌脚曲线的参数方程。作为模型推广,以椭圆状折叠桌为例,运用Matlab画出了桌脚边缘线在折叠过程中的动态变化示意图。同时,又深入研究Robert van Embricqs的滑动折叠桌,建立了新的桌脚曲线参数方程。最后,运用Matlab对多种形状折叠桌进行仿真,编写多目标优化算法,得出了最优加工参数,并进行了算法描述。     

Fe3+-H2O2-钙黄绿素-邻菲啰啉化学发光体系测定左旋多巴分析方法研究

提出了Fe3+-H2O2-钙黄绿素化学发光体系并用于左旋多巴的测定。在酸性介质中,Fe3+-H2O2-钙黄绿素-邻菲啰啉体系能产生明显的化学发光现象。加入左旋多巴后,对此化学发光强度具有显著的抑制作用,降低程度与体系中左旋多巴浓度呈良好的化学计量关系。据此,结合流动注射技术,建立了流动注射化学发光测定左旋多巴的方法。研究了影响化学发光强度的因素,并探讨了可能发生的机理。化学发光信号的降低值(ΔI)与左旋多巴浓度在2×10-8mol.L-1～2×10-6mol.L-1的范围内呈良好的线性关系,检出限为1.2×10-8mol.L-1。相对标准偏差为1.1%,该法用于片剂中左旋多巴含量的测定,结果令人满意。     

Leveraging Material Properties in Fluorescence Anion Sensor Arrays: A General Approach

As the demand for probes suitable for sensor development increases, investigation of approaches that utilize known successful receptors gains in general importance. This study describes a two‐prong approach that can be used as a guide to developing sensors from known receptors. First, the conversion of a simple receptor, calix[4]pyrrole, into a fluorescent probe to establish a ratiometric signal is described. Secondly, the sensors that employ an output from a single ratiometric calix[4]pyrrole probe are fabricated by using poly(ether‐urethane) hydrogel copolymers. These hydrogels are designed to absorb, internalize and transport aqueous electrolytes. A sensor array of ten different poly(ether‐urethane) matrices with varying comonomer proportions were doped with a single probe and were exposed to eight different anions: acetate, benzoate, fluoride, chloride, phosphate, pyrophosphate, hydrogen sulfide, and cyanide, eight urine samples and anti‐inflammatory drugs (NSAIDs). The poly(ether‐urethane) matrices comprise different proportions of anion‐binding urethane moieties and different hydrophilicity given by the ratio between ethylene glycol ether and butylene glycol ether. This diversity in the hydration behavior provides different environment polarity, in which the recognition and self‐assembly processes display enough diverse behavior to allow for unique response of the probe to the analytes. Furthermore, a single probe is shown to recognize eight different aqueous anions and eight urine samples when embedded in ten different polyurethanes in an array that displays 100 % classification accuracy. To demonstrate the potential of the concept for quantitative studies, an estimation of non‐steroidal anti‐inflammatory drugs ibuprofen and diclofenac in water and in saliva was performed. A limit of detection of 0.1 ppm and a dynamic range of 0.1–0.6 and 0.05–60 ppm was observed, respectively. Given the general difficulty of chemosensors to recognize aqueous anions, the fact that one probe recognizes eight different analytes attests to an enormous effect of the polymer environment on the recognition process. This method could be used to generate a variety of sensor arrays for various analyses including species that are difficult to recognize, such as small‐molecule‐ and inorganic anions.