A NOVEL EOR POLYMER (Ⅱ)——INVESTIGATION ON IN-SITU GELATION OF SMRF SYSTEM IN BEREA CORE

In-situ gelation of aqueous sulfomethylated resorcinol formaldehyde (SMRF) system inBerea core has been investigated. Two sets of displacement experiments were conducted with thissystem (containing 5% NaCl, 0. 036% CaCl_2. 2H_2O). The brine permeabilities of the coreswere reduced significantly from about 600 to 0.1 md. The in-situ gelation in Berea core occurreda little bit earlier than gelation anticipated from bulk test in the experiments. The gel time waseasier to control at initial pH between 6 and 8. During injection of SMRF system, the apparentviscosity was less than 1 mPa·s at 41℃.     

Syntheses of Two Potential Ligands for Tc-99m Labeling as Diagnosis Agents of Alzheimer''''s Disease

Two types of ligands-biphenyl and stilbene derivatives, whichcan be labeled with Tc-99m for the diagnosis of Alzheimer'sdisease (AD) have been synthesized successfully. The key stepsin these two syntheses involved Suzuki reaction and Wittig reac-tion respectively. The new discovered debromination reactionmay be expanded to the compounds with double or triple bondadjacent to the carbon atom bearing the bromine atoms. Thesetypes of syntheses provide a route to a series of biphenyl andstilbene derivatives that will benefit the search of new imagingagents for AD.     

Local and non-local sources of airborne particulate pollution at Beijing--The ratio of Mg/Al as an element tracer for estimating the contributions of mineral aerosols from outside Beijing

A new element tracer technique has firstly been established to estimate the contributions of mineral aerosols from both inside and outside Beijing. The ratio of Mg/Al in aerosol is a feasible element tracer to distinguish between the sources of inside and outside Beijing. Mineral aerosol, inorganic pollution aerosol mainly as sulfate and nitrate, and organic aerosol are the major components of airborne particulates in Beijing, of which mineral aerosol accounted for 32%―67% of total suspended particles (TSP), 10%―70% of fine particles (PM2.5), and as high as 74% and 90% of TSP and PM2.5, respectively, in dust storm. The sources from outside Beijing contributed 62% (38%―86%) of the total mineral aerosols in TSP, 69% (52%―90%) in PM10, and 76% (59%―93%) in PM2.5 in spring, and 69% (52%―83%), 79% (52%―93%), and 45% (7%―79%) in TSP, PM10, and PM2.5, respectively, in winter, while only ～20% in summer and autumn. The sources from outside Beijing contributed as high as 97% during dust storm and were the dominant source of airborne particulates in Beijing. The contributions from outside Beijing in spring and winter are higher than those in summer, indicating clearly that it was related to the various meteorological factors.     

LiCoO_2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO2 electrode in 1 mol/L LiPF6-EC:DMC:DEC elec- trolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO2 electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO2 electrode in Li/LiCoO2 cells is attributed to the formation of a Li1-xCoO2/LiCoO2 concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO2 hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5.     

微波辅助合成发光可调ZnS∶Cu纳米晶

以巯基丙酸(MPA)为稳定剂, 利用微波辐射加热方法制备了水溶性的Cu掺杂的ZnS纳米晶. 通过改变微波条件, 可以在460～572 nm之间实现对ZnS∶Cu纳米晶发射峰位的连续调控. 通过XRD、 UV-Vis、荧光及荧光衰减对ZnS∶Cu纳米晶的结构和发光性质进行了详细探索, 并利用时间分辨荧光光谱对其发光机理进行了初步研究.     

Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

酞侧基聚芳醚砜和聚芳醚酮共混物的高温流变行为

用锥板粘度计测试了酞侧基聚芳醚砜（ＰＥＳ－Ｃ）和酞侧基聚芳醚酮（ＰＥＫ－Ｃ）及其共混物的熔体流变行为．试样的流动活化能分别为１４５、１３３和１１２ＫＪ／ｍｏｌ．共混物的熔体粘度显著低于ＰＥＳ－Ｃ和ＰＥＫ－Ｃ粘度的对数加和值．并证明试样的熔体流动性和加工稳定性都已达到注射成型工艺的要求．     

（η^2—C60）[Pt（PPh3）2]8的合成与表征

C60是高度共轭的宠状结构碳素体．分子结构中六元环间的共价碳碳双键是富电子区，其反应性能与烯键类似，以碳碳双键与中心金属形成η2配位化合物．富勒烯η2配合物的合成及性能研究是当前研究热点之一[1~7]．本文在（η2-C60）［Pt（PPh3）2］n（n=1～6）系列研究[7]的基础上制备了（η2－C60）［Pt（PPh3）2］8，并用元素分析、红外光谱和光电子能谱进行鉴定和表征．1实验部分四（三苯基膦）合铂Pt（PPh3）4按文献[8]方法制备；C60纯度为99％；其余试剂均为分析纯．元素分析在ERLA－1106型元素分析仪上进行；光电子能谱在VGESCA…     

微交联聚合物降滤失剂的合成与性能

针对深井、超深井钻井液体系中的降滤失剂受长时间高温、高矿化度作用易降解的问题，以氮丙啶与3-氯丙烯反应制得-N-烯丙基氮丙啶（ALAI）； ALAI与乙二胺反应制得四烯基交联剂单体（EAAD）； EAAD与丙烯酰胺（AM）和2 丙烯酰胺基-2-甲基丙磺酸（AMPS）发生水溶液自由基共聚反应，合成了微交联共聚物降滤失剂(PAAT)，其结构和性能经¹H NMR, IR和TG-DTG表征。结果表明：PAAT可抗220 ℃高温，在高温、高矿化度条件下可维持钻井液的滤失量与流变性能，API滤失量均低于4.0 mL，高温高压滤失量均小于13.0 mL。     

小角X射线散射表征AOT/水层状溶致液晶的有序性

用小角X射线散射研究了AOT/水层状溶致液晶的有序性. 通过对散射曲线的解析, 讨论了表面活性剂浓度、温度和助表面活性剂等三个方面对溶致液晶层状相结构有序性的影响. 在一定的范围内, 提高温度, 改变表面活性剂浓度和加入少量助表面活性剂可使碳氢链排列由稀疏转变为密实, 层状相也相应地由“柔性双层”过渡到更加有序化的“平面双层”. 基于形状因子和体系内分子间作用力, 提出了层状相形成与有序化的机理, 同时采用分子模拟的方法展现了不同浓度下的液晶结构.