用电泳技术制备YBCO高温超导厚膜

介绍了电泳技术制备YBCO高温超导厚膜的实验方法和YBCO高温超导厚膜的电学性质测量 ,讨论了在学生小型科研实验或设计实验中开展此实验的学时安排、注意事项和实验内容的扩展 .     

Triterpenoid Constituents of Huperzia miyoshiana

Thirteen triterpenoids, including three new ones, miyoshianois A (1), B (2) and C (3), were isolated from Huperzia miyoshiana. The structures of these new compounds were established as 3-O-dihydroferuloyltohogenol (1), 16-oxo-3β,21β-dihydrox-y-serrat-14-en-24-ferulate (2) and 16-oxo-3a, 21β-dihydroxy-serrat-14-en-24-ferulate (3), respectively, on the basis of their spectroscopic analysis.     

关于折射率对散射光场分布影响的研究

根据Mie散射理论,采用理论计算和实验相结合的手法,研究了光散射现象以及散射介质的折射率对散射光场分布的影响.通过对空气中不同折射率的散射介质形成的散射光场光强的实验比较,论证了散射介质折射率的实部变化对散射光强的影响不大,其主要影响是通过对相位的变化来实现的,也即散射介质折射率的虚部变化对光强的影响很大,在实际应用中不可忽略.这一结论对以散射光场的分布为基础的各种研究具有一定的指导意义.     

锥形光纤的偏振特性

随着光通信技术的不断发展，光纤的应用越来越广泛，而锥形光纤以其独特的传光方式越来越多地应用于光纤连接、成像及测量等领域。实验测定了不同锥角和不同长度锥形光纤的偏振特性。理论上，根据麦克斯韦方程组以及边界条件给出了光在理想光纤中的场分布，阐明了实际光纤中光的传输特性。论证了锥形光纤长度与其偏振特性的关系，进而利用几何光学方法对锥形光纤锥角与其偏振特性的关系作了定性说明。并用具体数据进行了定量计算，得出偏振光经锥形光纤传输或耦合后再传输到其终端所得到均是椭圆偏振光的结论。     

三层干扰下的最优无线电信道问题的研究

研究了 2 0 0 0年 MCM— B题 ,将问题推广到有三层干扰的复杂情况 ,给出并严格证明了 ( k,1,1)问题的最优解     

基于"纵横向拉开档次法"的上市公司经营业绩评价

鉴于目前已具有较全面、完整、连续的有关上市公司各项指标的纵横向数据，为充分利用数据所蕴涵的信息，本文提出运用“纵横向拉开档次”的综合评价方法，其特点是使指标权重的确定能尽量将被评价对象在纵横向拉开档次。将该法运用于安徽地方板块的18家上市公司业绩评价，获得了各公司在1999～2001年间动态发展的分析结果。     

用点正则变换方法求解双原子分子的双曲型Poschl-Teller势的束缚态

采用在点正则变换下形状不变势的映射方法,给出了将Poschl-Teller Ⅰ势映射至Poschl-Teller Ⅱ势的点正则变换,并从Poschl-TellerI势的束缚态能级和波函数求得了Poschl-Teller Ⅱ势的束缚态能级和波函数.     

A new type SVM-projected SVM

Support vector machine (SVM), developed by Vapnik et al., is a new and promising technique for classification and regression and has been proved to be competitive with the best available learning machines in many applications. However, the classification speed of SVM is substantially slower than that of other techniques with similar generalization ability. A new type SVM named projected SVM (PSVM), which is a combination of feature vector selection (FVS) method and linear SVM (LSVM), is proposed in present paper. In PSVM, the FVS method is first used to select a relevant subset (feature vectors, FVs) from the training data, and then both the training data and the test data are projected into the subspace constructed by FVs, and finally linear SVM(LSVM) is applied to classify the projected data. The time required by PSVM to calculate the class of new samples is proportional to the count of FVs. In most cases, the count of FVs is smaller than that of support vectors (SVs), and therefore PSVM is faster than SVM in running. Compared with other speeding-up techniques of SVM, PSVM is proved to possess not only speeding-up ability but also de-noising ability for high-noised data, and is found to be of potential use in mechanical fault pattern recognition.     

On the tribological characteristics of dynamically loaded journal bearing with micropolar fluids

The addition of the additives to the lubricant oil to enhance the characteristics of the lubricant will influence the performance of the bearings. Based on the theory of micropolar fluids, the tribological characteristics of a dynamically-loaded journal bearing are numerically studied. Comparisons are made between the Newtonian fluids and the micropolar fluids. It is shown that for a dynamically-loaded journal bearing, the micropolar fluids yield an increase not only in the friction force, but also in the friction coefficient. In addition, the oil film pressure and the oil film thickness are obviously higher than that of Newtonian fluids.     

无界区域R1上推广的B-BBM方程的整体吸引子

本文研究了无界区域R^1上推广的B—BBM方程的长时间动力学行为，证明了该方程整体吸引子的存在性．