低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

Selective Oxidation of Methane to Methanol Using Molecular Oxygen on MoOx／（LaCoO3＋Co3O4） Catalysts

Comparatively high CH3OH selectivity (60.0%) and yield (6.7%) were obtained on MoOx/(LaCoO3 Co3O4) catalysts in selective oxidation of methane to methanol using molecular oxygen as oxidant. The interaction between MoOx and La-Co-oxide modified the molecular structure of molybdenum oxide and the ratio of O^-/O^2- on the catalyst surface, which controlled the catalytic performance of MoOx/(LaCoO3 Co3O4) catalysts.     

一维链状冠醚配合物:[{Na(18-C-6)}2(H2O)]n[M(SCN)4]n(M=Pd、Pt)的合成与结构

The reactions of 18-crown-6 with Na₂[M(SCN)₄] (M= Pd,Pt) were studied and the complex 1 [{Na(18-C-6)}₂(H₂O)]_n[Pd(SCN)₄]_n and complex 2 [{Na(18-C-6)}₂(H₂O)]_n[Pt(SCN)₄]_n were characterized by ele-mental analysis, IR and X-ray diffraction analysis. The complexes belong to monoclinic, space group P2₁/n with cell dimensions, 1:a=1.05734(7),b=1.42250(10),c=1.47762(10) nm,β=107.5330(10)°,V=2.1192(2)nm³,Z=2,D_calcd=1.460g·cm^-3,F(000)=964,R₁=0.0406,wR₂=0.1264 and 2:a=1.05985(19),b=1.4237(3),c=1.4744(3) nm,β=107. 096(3)°, V=2.1264(7)nm³,Z=2,D_calcd=1.690g·cm^-3,F(000)=1028,R₁=0.0292,wR₂=0.0859. In the solid state, the complexes 1 and 2 show an one-dimensional chain of [{Na(18-C-6)}₂(H₂O)]²⁺ complex cations and [M(SCN)₄]^2- (M=Pd,Pt) complex anions bridged by Na-N in-teractions.     

PROPERTIES OF POLYMER SUPPORTED Ni-Cu BIMETALLIC CATALYSTS PREPARED BY SOLVATED METAL ATOM IMPREGNATION

D-72 resin supported nickel-copper catalysts prepared by solvated metal atom impreg-nation (SMAI) were studied by magnetic measurements and X-ray photoelectron spectro-scopy (XPS). The Ni particles on the catalysts are very highly dispersed and displaysuperparamagnetic behaviour. Ni-Cu alloy clusters were found to be formed. The sur-face compositions are different from the bulk concentrations. In contrast with the surfaceenrichment in copper generally observed on conventional Ni-Cu catalysts, the surfaces ofthese catalysts are enriched in nickel. The nickel is in both zero and valent states, whilecopper is mainly in metallic state. Catalytic data show that the formation of Ni-Cu alloyclusters has a profound effect on the catalytic activities of the catalysts in the hydrogena-tion of furfural. The activity of the Ni:Cu ratio of one bimetallic catalysts is much higherthan that of the Ni or Cu monometallic catalyst.     

热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

聚氨酯(PU)/聚乙烯醇(PVA)共混体系的有关性能及其模型研究

本文研究了聚氨酯(PU)-聚乙烯醇(PVA)共混体系的动态力学性质、相逆转现象和透气性能.发现当PVA重量含量为30-50％时,共混体系发生了连续相与分散相的逆转.进一步,通过力学模型描述了该共混体系的模量-组成关系、动态力学温度谱以及透气系数与PVA含量的关系曲线.所有实验数据都落在理论预测的范围内,并分别与改进的Kerner模型和组合Kerner模型相符合.     

MORPHOLOGICAL STUDIES OF PET FILMS WITH DIFFERENT CRYSTALLIZATION RATE IN DRAWING PROCESSES

Morphological changes during stretching of two PET samples (S and T) with different crystallization rate have been studied by means of SALS, solvent etching and polarizing microscope techniques. Results show that under the same drawing conditions larger and more perfect rod-like and spherulitic superstructures were formed more easily in the sample with higher crystallization rate (sample S). The amount of less compact regions which may be easily attacked by the vapor of allyl amine decreases more rapidly in sample S than in sample T during stretching, and these regions are more randomly distributed in sample T especially at low elongations. The difference of the two samples in morphological changes is coincident with their difference in tensile behavior.     

3-氨基环己基甲酸和cis-3-氨基环己烯基-5-甲酸立体异构体的合成

通过手性胺拆分方法，从3-环己烯基甲酸出发分别合成得到了3-氨基环己基甲酸（ACHC）的四个立体异构体，以及cis-5-氨基-3-环己烯基甲酸（ACHEC）的二个立体异构体。     

新型6-氟-4(3H)-喹唑啉酮类Schiff碱的合成及其抑菌活性

以2-氨基-5-氟苯甲酸为起始原料，与醋酐酰化关环制得6-氟-2-甲基噁嗪-4-酮(1)； 1在80%水合肼中回流反应制得6-氟-2-甲基-3-氨基-4(3H)-喹唑啉酮(2)； 2分别与羟基芳醛和杂环芳醛反应合成了6个6-氟-4(3H)-喹唑啉酮类Schiff碱（3a~3f），其中3b~3f为新化合物，其结构经¹H NMR， ¹³C NMR， IR和元素分析表征。采用琼脂扩散法研究了3a~3f对大肠杆菌、金黄色葡萄球菌和枯草杆菌的抑制活性。结果表明：用药浓度为400 μg·mL^-1时，3a~3f对受试菌种均有一定的抑制活性，其中6-氟-2-甲基-3-(4-吡咯苯亚甲氨基)-4(3H)-喹唑啉酮(3c)抑菌活性最强，对大肠杆菌和枯草杆菌的抑菌圈直径分别为9.38 mm和9.00 mm。     

聚合物共混物脆韧转变性能研究 Ⅲ.分散相形态参数之间的关系

为了研究形态（特别是分散状态）对聚合物共混物韧性的影响，建立了准网络形态模型，定义了分散相分布系数（ξ，０＜ξ１），并给出其物理意义，推导了基体层厚度的计算公式，研究了形态参数的变化对基体层厚度的影响．对于常见的无规形态，ξ≈１．对于准网络形态，ξ＜１，并且不是常数．计算结果表明，减小ξ和分散相粒径及其分布、增大其体积分数有利于减小基体层厚度．从理论上证明了准网络形态比无规形态更有利于减小基体层厚度．