PROPERTIES OF POLYMER SUPPORTED Ni-Cu BIMETALLIC CATALYSTS PREPARED BY SOLVATED METAL ATOM IMPREGNATION

D-72 resin supported nickel-copper catalysts prepared by solvated metal atom impreg-nation (SMAI) were studied by magnetic measurements and X-ray photoelectron spectro-scopy (XPS). The Ni particles on the catalysts are very highly dispersed and displaysuperparamagnetic behaviour. Ni-Cu alloy clusters were found to be formed. The sur-face compositions are different from the bulk concentrations. In contrast with the surfaceenrichment in copper generally observed on conventional Ni-Cu catalysts, the surfaces ofthese catalysts are enriched in nickel. The nickel is in both zero and valent states, whilecopper is mainly in metallic state. Catalytic data show that the formation of Ni-Cu alloyclusters has a profound effect on the catalytic activities of the catalysts in the hydrogena-tion of furfural. The activity of the Ni:Cu ratio of one bimetallic catalysts is much higherthan that of the Ni or Cu monometallic catalyst.     

热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

聚氨酯(PU)/聚乙烯醇(PVA)共混体系的有关性能及其模型研究

本文研究了聚氨酯(PU)-聚乙烯醇(PVA)共混体系的动态力学性质、相逆转现象和透气性能.发现当PVA重量含量为30-50％时,共混体系发生了连续相与分散相的逆转.进一步,通过力学模型描述了该共混体系的模量-组成关系、动态力学温度谱以及透气系数与PVA含量的关系曲线.所有实验数据都落在理论预测的范围内,并分别与改进的Kerner模型和组合Kerner模型相符合.     

MORPHOLOGICAL STUDIES OF PET FILMS WITH DIFFERENT CRYSTALLIZATION RATE IN DRAWING PROCESSES

Morphological changes during stretching of two PET samples (S and T) with different crystallization rate have been studied by means of SALS, solvent etching and polarizing microscope techniques. Results show that under the same drawing conditions larger and more perfect rod-like and spherulitic superstructures were formed more easily in the sample with higher crystallization rate (sample S). The amount of less compact regions which may be easily attacked by the vapor of allyl amine decreases more rapidly in sample S than in sample T during stretching, and these regions are more randomly distributed in sample T especially at low elongations. The difference of the two samples in morphological changes is coincident with their difference in tensile behavior.     

3-氨基环己基甲酸和cis-3-氨基环己烯基-5-甲酸立体异构体的合成

通过手性胺拆分方法，从3-环己烯基甲酸出发分别合成得到了3-氨基环己基甲酸（ACHC）的四个立体异构体，以及cis-5-氨基-3-环己烯基甲酸（ACHEC）的二个立体异构体。     

新型6-氟-4(3H)-喹唑啉酮类Schiff碱的合成及其抑菌活性

以2-氨基-5-氟苯甲酸为起始原料，与醋酐酰化关环制得6-氟-2-甲基噁嗪-4-酮(1)； 1在80%水合肼中回流反应制得6-氟-2-甲基-3-氨基-4(3H)-喹唑啉酮(2)； 2分别与羟基芳醛和杂环芳醛反应合成了6个6-氟-4(3H)-喹唑啉酮类Schiff碱（3a~3f），其中3b~3f为新化合物，其结构经¹H NMR， ¹³C NMR， IR和元素分析表征。采用琼脂扩散法研究了3a~3f对大肠杆菌、金黄色葡萄球菌和枯草杆菌的抑制活性。结果表明：用药浓度为400 μg·mL^-1时，3a~3f对受试菌种均有一定的抑制活性，其中6-氟-2-甲基-3-(4-吡咯苯亚甲氨基)-4(3H)-喹唑啉酮(3c)抑菌活性最强，对大肠杆菌和枯草杆菌的抑菌圈直径分别为9.38 mm和9.00 mm。     

聚合物共混物脆韧转变性能研究 Ⅲ.分散相形态参数之间的关系

为了研究形态（特别是分散状态）对聚合物共混物韧性的影响，建立了准网络形态模型，定义了分散相分布系数（ξ，０＜ξ１），并给出其物理意义，推导了基体层厚度的计算公式，研究了形态参数的变化对基体层厚度的影响．对于常见的无规形态，ξ≈１．对于准网络形态，ξ＜１，并且不是常数．计算结果表明，减小ξ和分散相粒径及其分布、增大其体积分数有利于减小基体层厚度．从理论上证明了准网络形态比无规形态更有利于减小基体层厚度．     

偶氮胂-DBS用于光度法测定牛血清白蛋白

在室温下,于pH 2.5的Britton-Robinson缓冲溶液中及非离子表面活性剂OP存在下,牛血清白蛋白(BSA)与偶氮胂-DBS的复合物的最大吸收在514 nm波长处,但显色复合物与试剂空白吸光度之差在370 nm处最大,选择在370 nm处测定,反应迅速完成。非离子表面活性剂OP可提高反应灵敏度及复合物稳定性。乙醇可提高体系灵敏度。BSA的质量范围在0~60.0 mg.L-1范围内符合比耳定律,方法表观摩尔吸光率3ε70 nm=8.58×105L.mol-1.cm-1。方法用于测定血清样品中蛋白质的总量,5次测定值的RSD为0.60%,回收率为98.0%。     

Syntheses, Structures and Coordination Behavior of Central Hydroxyl Group Containing Polydentate Ligands

Proteins containing dinuclear Cu (II), Zn (II) centers play paramount roles in biology1. As mimetic of metal-dependent esterase, dinuclear Cu (II) and Zn (II) complexes have received a great deal of attentions2~6. They are of interest in the field of biomimetic chemistry to provide an improved understanding of the function of the biological sites and as potential catalysts for substrate oxidations. Schiff base type polydentate ligands which contain centeral hydroxyl group have been wid…     

PEO-LiClO_4-ZSM5 composite polymer electrolyte (IV): Polarized optical microscopy study

All solid-state lithium polymer batteries may be one of the best choices for the future electrochemical power source, characterized by high energy densities, good cyclability, reliability and safety[1,2]. Owing to its potential capability to replace the t…