光致变色多阶游程光存储研究

多阶游程存储是一种不改变光学系统而显著提高光存储容量和数据传输率的新方法.介绍了光致变色多阶游程存储原理和实验系统.提出了基于光致变色原理的多阶游程存储数学模型，该模型反映了记录符反射率与曝光功率、曝光时间之间的非线性关系，并在此基础上确定了光致变色多阶游程存储的写策略.基于650nm光致变色材料进行了4阶游程存储的动态实验.结果表明，实验中采用的650nm光致变色材料可用于多阶游程存储，采用的写策略能够有效地使记录信道线性化，利于采用适合线性系统的信号处理方法. 关键词： 多阶游程 光致变色 光存储 写策略     

Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.     

多子阵子空间拟合波达方向估计

提出了考虑阵元互耦的子空间拟合波达方向估计方法。用一带状、对称Toeplitz矩阵对均匀线阵的互耦矩阵建模。根据互耦矩阵自由度,去除部分两边阵元,研究了子空间拟合算法中ESPRIT算法的理论性能。在大快拍的情况下,均匀线阵的MCLS-ESPRIT算法的角度估计误差是一个零均值的联合高斯分布,同时给出了分布的协方差表达式。由方差的数值计算可知,在阵元数和信源数确定的情况下,存在估计标准差最小的子阵;与不存在互耦的理想情况相比,除了估计标准差少许增加外,性能接近。本文的方法已应用于高分辨率测深侧扫声呐,获得了好结果。在声呐阵阵元数增加的条件下,用本文的方法,能抑制均匀线阵的互耦的影响。     

电子束装置运行稳定性的测量

 为了验证电子束装置的稳定性,分别对电流波形、电压波形进行了多次测量,对二极管放电时注入腔中电子均匀性进行了探测,最后改变二极管真空度测量了泵浦氩的荧光 谱的稳定性。     

m阶多时滞中立型微分方程的2T周期解

研究m阶常系数线性多时滞中立型方程的周期解，讨论了2T周期解的存在性和唯一性，得到了2T周期解存在唯一若干新的充分必要条件。所得主要结果适用性更广。它包括了许多相关献的结果为其特例，推广、改进了这些献的主要结果。可对所研究的中立型方程周期解存在的大量情形作出判断，而这些情形用其他献的结果是无法判断的。换言之，对方程（1），主要结果是最一般化的，用同样的方法已不可能得到更好的结果。     

用激光感生荧光法测量亚稳态原子寿命

本文用激光感生荧光法(LIF)分析了Gd原子亚稳态能级215cm~(-1),533cm~(-1),999cm~(-1)在原子束中的速度分布。由原子束轴线上两不同点上的亚稳态原子速度分布的变化得到了亚稳态原子的寿命。理论分析和实验结果表明这是一种简单、灵敏并且有效的亚稳态原子寿命测量方法。     

量子混合态的统计角

本文把关于量子纯态之间的统计角概念推广到量子混合态,并提出了单个混合态的发散角这一概念,导出了纯态判据,用到测量上,响应函数不过是量子系统与仪器之间的统计角余弦的平方,而测量过程中的熵增加则显现为混合态发散角的扩大。 关键词：     

DIELS-ALDER REACTIONS OF FURAN WITH DIENOPHILES CATALYZED BY YbCl3

The yield and stereoselectivity of the Diels-Alder reactions between furan(or 2-methylfuran)and different dienophiles are markedly enhanced by the catalysis of anhydrous YbCl₃.     

Large second-order optical nonlinearities of s-triazine derivatives: View from micro molecules to macro crystals

Organic nonlinear optics (NLO) is also called mo-lecular nonlinear optics. In recent years organic mate-rials have been intensively studied because of their large NLO coefficients and structural diversities[1―3]. Second harmonic generation (SHG) is a bas…     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007