一类高次系统极限环的存在与唯一性

本文对系统dxdt=-y(1-ax2n)(1-bx2n) δx-lx4n 1dydt=x2n-1(1-cx2n)(1-bx2n)进行定性分析,得出其极限环的存在性,不存在性及唯一性的一系列充分条件.     

差分吸收光谱法测量大气污染的测量误差分析

差分吸收光谱技术被广泛地应用于测量大气中微量元素的浓度，尽管该技术利用最小二乘法来反演待测气体的浓度，能够得到很高的测量精度。但是，由于仪器本身的噪声以及测量波段其它气体的干扰等，使得仪器的测量有一定的误差，而且上述因素还决定着仪器的测量下限。对差分吸收光谱方法的测量误差以及引起误差的原因作了详细的分析。     

稀土、2,2''''-联吡啶、邻氨基苯基苯甲酸配合物合成、光谱表征及荧光性质

2,2'-联吡啶(bipy)、邻氨基苯基苯甲酸(HL)与稀土离子(RE=Tb,Eu,Sm,Nd)合成了固体稀土配合物.用元素分析、摩尔电导、紫外光谱、红外光谱、差热-热重分析和荧光光谱,对配合物的组成进行了确定和表征,并对TbL3和TbL3·bipy·3H2O的荧光性能进行了测试和讨论.TbL3·bipy·3H2O的荧光强度比TbL3的荧光强度强.     

激光二极管反馈干涉的实验观测

利用LabView软件虚拟示波器和信号源,观测了激光二极管反馈干涉实验现象．实验证明反馈回激光二极管的光的入射方向和入射光强以及信号处理电路的带宽,对反馈干涉信号有很大的影响．     

差分吸收光谱法测量大气痕量气体浓度误差分析及改善方法

差分吸收光谱技术(DOAS)中采用线性最小二乘拟合方法,用痕量气体标准差分吸收截面对测量得到的差分吸收光谱进行拟合,得出大气中痕量气体的浓度.计算结果的准确性不仅取决于光谱的测量精度,而且受标准差分吸收截面以及仪器函数和温度等诸多因素的影响.详细地分析了计算误差的产生原因,提出了用高浓度样品池得到标准吸收截面的方法,针对光谱固有结构,以及温度对标准吸收截面的影响,改进了浓度反演算法.大量的实验表明,综合运用上述方法,即便对低浓度的样气,相对测量误差也能降低到10%以下.     

与HBV X蛋白相互作用的细胞蛋白的筛选及其鉴定

参考GenBank核苷酸序列库中的HBV的核苷酸序列设计合成了一对对应于HBx基因的引物，从原发性肝癌(hepatocellular carcinoma，HCC)患者的血清中提取HBV基因组DNA作为模板，扩增HBx编码区并测定了核苷酸序列．将该编码区克隆到酵母双杂交系统的诱饵蛋白表达载体pGBKT7中，转入酵母细胞AH109，进行表型鉴定．然后通过Mating实验从已制备好用于酵母双杂交系统的肝cDNA表达文库中筛选与HBx相互作用的细胞蛋白，并用体外免疫共沉淀实验进一步验证．研究表明，分离得到的与HBx基因编码的蛋白相互作用的4种新的细胞蛋白，分别是醛缩酶B、C8α亚基、一种丝氨酸蛋白酶Hepsin和一种未知蛋白．     

稀土甘氨酸咪唑配合物[RE(Gly)4(Im)(H2O)](ClO4)3的热化学研究

采用溶解-反应量热法在具有恒温环境的溶解-反应热量计内,测定了[Gd(Gly)4(Im)(H2O)](ClO4)3和[Y(Gly)4(Im)(H2O)](ClO4)3两种稀土甘氨酸咪唑配合物的标准生成焓分别为(-3 461.46 ±0.22) kJ·mol-1 和(-3 926.6±0.90) kJ·mol-1.     

BOUNDEDNESS OF MAXIMAL SINGULAR INTEGRALS

The authors study the singular integrals under the Hormander condition and the measure not satisfying the doubling condition. At first, if the corresponding singular integral is bounded from L2 to itself, it is proved that the maximal singular integral is bounded from L∞to RBMO except that it is infinite μ-a.e. on Rd. A sufficient condition and a necessary condition such that the maximal singular integral is bounded from L2 to itself are also obtained. There is a small gap between the two conditions.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…