石墨烯/二氧化钛复合材料富集-石墨炉原子吸收光谱法测定铅和镉

以石墨烯/二氧化钛复合材料为吸附剂,结合石墨炉原子吸收光谱法,建立了Pb?和Cd?的检测方法。优化的实验条件为:溶液pH=5.0,吸附时间为60 min,吸附剂用量为0.02 g。结果表明:吸附过程符合拟二级动力学反应模型;吸附反应是吸热过程。建立的石墨烯/二氧化钛复合材料富集-石墨炉原子吸收光谱法对Pb2+和Cd2+的检出限分别为0.086和0.006μg/L,相对标准偏差为3.2%和2.5%。将本方法应用于矿石标准样品的测定,测定结果与标准值相符;用于茶叶实际样品的测定,回收率为96.8%~105.0%。     

聚乙二醇表面改性抑制蛋白质非特异性吸附

聚乙二醇作为一种具有特殊亲水性和电中性的聚合物,被公认为抑制非特异性吸附的重要物质基础。本文综述了近年来利用聚乙二醇对各种用途的基质进行表面改性地研究,包括聚乙二醇本身的结构特点、聚乙二醇抵抗吸附的理论解释、在疏水性表面引入聚乙二醇改性的各种策略,并展望了其发展前景。     

微流控多层纸芯片研究乳腺癌组织的微环境酸化

将多层纸芯片技术用于肿瘤微环境酸化研究。将种植有乳腺癌细胞的8层硝酸纤维素薄膜叠放并封装于芯片中,用以模拟3D乳腺癌组织。灌流培养多层纸芯片乳腺癌组织数天后拆分多层纸芯片,以检测各层薄膜上细胞生存、增殖和胞内乳酸含量,解析不同深度下肿瘤细胞微环境酸化程度。实验表明,细胞酸化程度受灌流速度影响,高灌流速度可以增加纸层上细胞密度,酸性代谢产物排出增加。缺氧也是导致微环境酸化的重要因素。随着氧气扩散距离的增加,酸化程度加重,并且肿瘤细胞生存率和增殖率相应降低。     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

单壁碳纳米管对C-C键水解酶BphD的固定化性能

采用修饰与未修饰单壁碳纳米管固定C-C键水解酶BphD,并对固定化酶的相对活性、稳定性、重复使用性进行了考察.结果表明,未修饰单壁碳纳米管固定的BphD相对活性为游离态的52.5%,其热稳定性和在变性剂中的稳定性均有所提高,且重复使用10次仍可保持初始活力的90%.修饰单壁碳纳米管固定的BphD相对活性可达99.7%,但其稳定性没有明显提高.同源模建及分子对接分析结果显示,未修饰的单壁碳纳米管对BphD亚基之间的联系可能存在干扰作用,从而对其活性产生影响.     

Synthesis, Crystal Structure and Chemical Bonding of a New Binary Lu-Sn Phase: Lu11Sn10

A new tetragonal phase of Lu11Sn10 is obtained from high temperature reaction of the pure elements in a welded tantalum tube. Its crystal structure was established by single-crystal X-ray diffraction. Lu11Sn10 crystallizes in the tetragonal space group I4/mmm (No.139) with a=11.2953(18), c=16.424(4), V=2095.5(7)3 , Z=4, Mr=3111.57, Dc=9.863 g/cm3 , μ=62.897 mm-1, F(000)=5124, and the final R=0.0348 and wR=0.0894 for 706 observed reflections with I>2σ(I). The structure of Lu11Sn10 may be derived from the Ho11Ge10 structural type. It is isostructural with Dy11Sn10 , featuring a three-dimensional (3D) framework composed of [Sn4] squares and [Sn2] dimers interlinked via Sn-Sn bonds with two types of one-dimensional (1D) tunnels along the c-axis, which are occupied by isolated Sn atoms, [Sn2] dimers and all the Lu atoms. Band structure calculation based on density functional theory method indicates that Lu11Sn10 is metallic.     

Preparation and Characterization of Al8.31Si1.91Mg3.78O20/Al4.8Si1.2O9.6/Mg2.0Al4.02Si4.98O18 Multiphase Material

A two-step sintering method was used to prepare Al8.31Si1.91Mg3.78O20 (corundum solid solution)/Al4.8Si1.2O9.6 (mullite solid solution)/Mg2.0Al4.02Si4.98O18 (cordierite solid solution) multiphase material, for the purposes of making these three crystal structures have point defects which could help the particles diffuse and transfer at high temperature, accelerate the sintering efficiently and enhance the material strength as well as the bulk density. The impacts of different formulas on the structure and properties of the multiphase material were investigated. With XRD and SEM analyses, for each sample, the crystal structure and microstructure were characterized, the crystalline phase content and cell parameters were determined with Rietveld Quantification software, and the properties were tested. The comparative optimal formula determined was calcinated chamotte of 80wt% and calcinated sludge of 20wt%; and its corresponding bending strength and retention rate of bending strength after a thermal shock were 29.74 MPa and 80.15%, respectively.     

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.     

Decatungstate Incorporated Metal-organic Framework for Degradation of Rhodamine B under Sunlight Irradiation

A new decatungstate incorporated metal-organic framework {[Co2（bpdo）5（H2O）n- W10O32]}n·nbpdo·2nH2O（1, bpdo = 4,4＇-bis（pyridine-N-oxide） has been synthesized through a one-step hydrothermal reaction and characterized by elemental analyses, IR, solid UV-vis absorption spectra, and single-crystal X-ray diffraction. The structural analysis indicates that 1 displays a one-dimensional ladder structure with [W10O32]4- as guest incorporated by electrostatic interaction. The photocatalytic property of the framework toward a rhodamine B （RhB） solution was also investigated. The results indicated that compound 1 possesses high photocatalytic activity in heterogeneous system under sunlight irradiated.