Investigation of all-solid photonic bandgap fiber with low losses in low-order bandgaps

We report synoptically an investigation of design, fabrication and characterization of a new all-solid photonic bandgap fiber. By introducing an index depressed layer around a high index core in every unit cell of photonic crystal cladding, a novel all-solid bandgap fiber is predicted to obtain low confinement and bend losses within low-order bandgaps. After optimizing the structure parameters, we fabricate a batch of rods used for cladding cells, select a pure-silica rod for core cell and an inner-hexagonal jacket tube. We demonstrate an all-solid bandgap fiber with the transmission loss as low as 2 dB/km at 1,310 nm and a bandwidth of over 700 nm within the first bandgap. The guiding properties are also measured, respectively, such as transmission spectrum, attenuation spectrum, bend loss, mode field intensity profile, and chromatic dispersion.     

Highly efficient high-power thulium-doped germanate glass fiber laser

A 64 W fiber laser at 1.9 microm with a slope efficiency of 68% with respect to the launching pump power at 800 nm was demonstrated in a one-end pump configuration using a piece of 20 cm long newly developed thulium-doped germanate glass double-cladding single-mode fiber. A quantum efficiency of 1.8 was achieved. An output laser power of 104 W at 1.9 microm was demonstrated from a piece of 40 cm long fiber with a dual-end pump configuration.     

用于显示的透射型法布里-珀罗光调制器

提出了一种用于显示的,基于透射型法布里-珀罗干涉的微机电系统(MEMS)光学调制器。基于多光束干涉原理分析了调制器的光学特性,推导出了调制器结构的特征参量。分析表明,当调制器的腔长为cλ/4时,透射光可以实现暗态显示;当调制器的腔长取为零或cλ/2时,透射光可以实现亮态显示。通过控制法布里-珀罗腔长,就可实现调制器的明暗调制。理论上证明了该调制器用于显示的可行性。设计了一种基于微机电系统的透射型法布里-珀罗光学调制器结构,该调制器的理论衬比度达到150。仿真结果表明,该调制器具有2.4 V的低电压静电驱动性能。     

Cyclic Heating-Annealing and Boltzmann Distribution of Free Energies in a Spin-Glass System

Ergodicity of a spin-glass is broken at low temperatures; the system is trapped in one of many ergodic configurational domains. Transitions between different ergodic domains are achievable through a heating-annealing procedure. If this experiment is repeated infinite times, all ergodic configurational domains will be visited with frequences that decreasing exponentially with their free energies. The mean free energy density of a spin-glass system on a random graph is calculated based on this free energy Boltzmann distribution in the present work, by means of the cavity approach.     

双包层光纤激光器的受激拉曼散射与热应力

 建立了高功率掺镱双包层光纤激光器的速率方程模型与热应力模型,对影响受激拉曼散射效应和热应力效应的关键参数（如纤芯半径、光纤长度、泵浦波长、泵浦方式）进行了数值模拟。结果表明:对于较小的纤芯半径,光纤内的斯托克斯光功率较大且增长迅速,因此增加纤芯半径能有效减弱受激拉曼散射效应;减小光纤长度能提高受激拉曼散射的阈值,而纤芯的热应力也增大,因此在不出现热应力引起光纤断裂的情况下,可以减小光纤长度以提高输出功率;采用976 nm波段泵浦源能提高输出功率,降低热应力的影响;两端均匀泵浦方式可以有效降低纤芯热应力,同时维持高功率输出。     

用传输线和时域有限差分法计算电缆X射线响应

 介绍了时域传输线和时域有限差分两种计算电缆X射线瞬态响应的方法,并利用电缆芯线总电荷以及介质层的电荷分布,结合实验结果,分别给出了时域传输线模型中的电流源和时域有限差分模型中电流密度的计算方法。作为例子,在60 keV单能X射线垂直于电缆轴向辐照的条件下,采用两种方法计算了电缆两端接匹配负载时负载上的电流响应;采用传输线方法计算了不同能量X射线辐照电缆时的芯线负载电流响应。计算结果表明,两种方法计算的电缆X射线瞬态响应是一致的;电缆介质层中存在静电场;X射线能量不同时,电缆芯线负载电流存在最大值。计算中,电缆与X射线的作用采用蒙特卡罗方法计算。     

甾族化合物~(13)CNMR谱化学位移定量构谱关系的研究

利用原子电性距离矢量(Atomic Electro-negativity Distance Vector,AEDV)和原子杂化状态指数(Atomic Hybridization State Index,AHSI)对203个甾族化合物中4434个碳原子进行结构表征并与其核磁共振碳谱(13CNMR)建立多元线性定量结构波谱相关(QSSR)模型,同时运用逐步回归结合统计检测对模型变量进行筛选,最后采用内部及外部双重验证的办法对所得模型稳定性能进行深入分析和检验,建模计算值、留一法(leave-one-out,LOO)交互校验(cross-validation,CV)预测值和外部样本预测值的复相关系数(R)分别为0.9574、0.9571和0.9537.其结果表明,AEDV,AHSI与13CNMR谱化学位移显著相关.     

Rapid Fabrication of Three-Dimensional Woodpile Photonic Crystals by Means of Two-Photon Photopolymerization

Two-photon photopolymerization （TPP） of femtosecond laser is a promising method to fabricate three-dimensional woodpile photonic crystals （PCs）. We build micro-fabricatlon system based on the principle of TPP. Three- dimensional woodpile PCs consisting of in-plane rod distances ranging from 1000nm to 2000nm are fabricated by focusing femtosecond laser in photosensitive liquid resin ORMOCER. The properties of the PCs are also discussed, and fundamental photonic band gaps in middle-infrared range are measured, whose in-plane rod distances are 1500nm and 2000 nm. Three-dimenslonal woodpile PC devices with desired defects, such as cross-waveguide and micro-laser structures, are introduced easily by TPP. We fabricate the three-dimensional woodpile PCs in the liquid resin at the fast scanning speed of 120μm/s.     

Coherent Scattering of Light by Bose-Einstein Condensation in a Tight Confinement

We have observed strong scattering of a probe light by dilute Bose-Einstein condensate （BEC） ^87Rb gas in a tight magnetic trap. The scattering light forms fringes at the image plane. It is found that we can infer the real size of the condensation and the number of the atoms by modelling the imaging system. We present a quantitative calculation of light scattering by the condensed atoms. The calculation shows that the experimental results agree well with the prediction of the generalized diffraction theory, and thus we can directly observe the phase transition of BEC in a tight trap.